Repair and Maint

Taking out the sample of transformer oil from each transformer at various locations for checking the dielectric strength and acidity test of oil for the present of moist presence of moisture, impurities etc after the dehydration including de-hydration (filtration) of transformer oil through mobile filtreration plant to be used to respective locations duly connecting inlet/outlet to the machine by switching off HT power supply and taking all safety precautions so as to achieve dielectric strength not less than 36 to 45 KV per minute rupturing capacity and switch on supply, charging of transformer all as directed for transformer. The item inclusive of transportation of mobile filtration upto work site and testing will be carried out after dehydration and exclusive of oil topping. Oil taopping of required quantity will be paid separately on measurement as per schedule of this work, work will be carried out all location of ARTC & S. Wk will be carried out through authorised repairer from state/Central Govt Agencies.

Replacement of bushing insulator (male and female with gasket) complete set as per sample for 100 KVA transformer.

Replacement of bushing insulator (male and female with gasket) complete set as per sample fo 250 KVA transformer.

Replacement of bushing insulator (male and female with gasket) complete set as per sample for 500 KVA transformer.

Supply and topping of filtered transformer oil for all type of transformers, testing of oil will be done before filling in transformers, limits will be specified as per standard parameters of IS standard.

Removing the existing oil stains by point removers and cleaning with scrapers, preparing the old transformers surface including subsequent coat of synthetic enamel paint of approved colour with one coat of red oxide zinchome primers of the surface of the transformer of capacity 500 KVA by spray gun all as specified and directed . ( Mention the details of repair carried out in each transformers.)

ditto but for transformer 250 KVA

ditto but for transformer 200 KVA

ditto but for transformer 315 KVA

M/L for dismentling and taking out 315 KVA outdoor type transformer from Skv and transporting into workshop for re winding by copper including filling of transformer oil and placing the same in to the same location including testing all as specified ( Old unserviceable winding will be the properly of contractor as schedule of credit) , transportation, loading /unloading inclusive.

Shifting/inter changing of transformer upto 315 KVA by hydra/recovery including reinstallation and testing complete all as per site requirement.

M & L for MCCB, four pole, 415 Volts breaking capacity 25 KA with adjustable thermal range capacity 100 Amp confirm to IS/ IEC 60947-2 including taking down existing MCCB & making arrangements for fixing the MCCB all as directed by Engineer-in-Charge.

M & L for MCCB, four pole, 415 Volts breaking capacity 25 KA with adjustable thermal range capacity 63 Amp confirm to IS/ IEC 60947-2 including taking down existing MCCB & making arrangements for fixing the MCCB all as directed by Engineer-in-Charge.

M/L for repair/maint of 63 to 125 KVA DG Set complete including replacement of following wornout parts :- (a) Diesel filter

(b) Mobil filter

© Air filter large

(d) Air filter small

(e) Dyanmo and self repair complete replacement of required accessories

(f) Thermostate replacement

(g) Turebo kit

(l) clamps

(m) PVC hose

Supply only Engine oil 20W 40 multi grade in sealed container complete all as specified and directed. Make- Servo, Castrol . NOTES :- Engine oil 20W 40 multi grade shall be collected in sealed container .Cost of filling of Engine oil 20W 40 multi grade in included in unit rates.

Supply only off solenoid assembly for 62.5/100 KVA Gen set.

M/L for repairing/rewinding of alternator 63 KVA to 100 KVA DG set installed incl disconnecting electrical and mechanical connections, dismantling the alternator, checking, cutting burnt copper winding of armature , cleaning the slots and rewinding with existing gause of supper quality copper winding wire , varnishing, drying and reassembling , re-connection of all electrical and mechanical connections. Supply and replace the followingworn out parts :- (a) Rectifier 440 volts

(b) carbon brush set

(c) Slip ring turning /polishing

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 1.5 metre long etc. with charcoal/ coke and salt as required.

M/S. MM Enterprises

A A ENTERPRISES