Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC NOT AVAILABLE | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.8 L+₹4.3 L (23.5%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹23.8 L+₹5.3 L (28.9%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹25.9 L+₹7.4 L (40.2%)Rejected-Finance | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹26.7 L+₹8.2 L (44.5%)Rejected-Finance | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIR TO EXTERNAL AND INTERNAL PLASTER TO CERTAIN MARRIED AND OTM ACCN IN AREA - IV OF AGE B/R WEST AT COLABA , MUMBAI.
2023_MES_605635_1
8773/E8
Open Tender
Civil Works
Item Rate
270 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹80,000
Yes
11 Aug 2023
26 Jun 2023
17 Jul 2023
26 Jun 2023
15 Jul 2023
9 Jul 2023
Amount
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. Note:- (a) All loose unsound and cracked concrete shall be removed out side MD land). (b) thickness shall be measured excluding plaster
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns with power/hand driven chisel as directed by the engineer-in-charge exc 40 mm average depth including saw-cutting of all edges and making square shoulders of the cavities all as specified and as directed. Note:- (a) All loose unsound and cracked concrete shall be removed out side MD land). (b) thickness shall be measured excluding plaster
Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement of any dia all as specified and as directed. Note : - Length of reinforcement bars cleaned of rust all around shall be measured for payment.
M&L in repairs mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and as directed.
M&L in repairs mild steel TMT bars of any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M&L for providing and placing in position micro-concrete, grade M40 which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm all as specified and as directed by the Engineer in charge Note:- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument and including necessary form work.
M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.
M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and applying the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght of bldg all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE
M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height all as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex
S&F hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia and not exceeding 4kg per sqm and fixed in reinforcement or by anchroring on wall screw min 8 -10 cm in depth drilled and grout into the required wall and concrete structure all as specified and directed
M&L for Ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces including taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finish by using sponge, including use of scaffolding and removing debris outside MD land all as specified and as directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L in repairs rendering 10mm thick on fair faces of brick work or concrete surfaces on cement mortor 1:3 for including taking down and removing debris outside MD land all as specified and as directed.
M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coats 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instruction complete all as specified and as directed. Make : Dr. Fixit RepairPro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE
M&L for preparing Newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and use of scaffolding where required at any height of buildings for external painting all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint all as specified and directed. Make : Asian - Tractor or Berger- Bison)
M&L for preparation of newly plastered surfaces of celling and applying three coats of white wash all as specified and directed.
M&L for preparing old painted plastered surface of external walls /ceiling/ chajjas/ /roofing concrete structure or any other similar structure exterior walls are scrubbbed and scrapped thoroughly to remove smoke soot, moulds, moss and efflorsant salts, and mildew using steel wire brush. Mild solution (like bleaching powder in water) can also be used to get rid of mildew and algae from the walls. Walls need to dry completely. High pressure water jet can also be used to wash away dirt and any old paint flakes. Cracks need to be attended on priority.Cut in along the length of the crack using a knife. Crack Filling compounds are used to fill in the cracks. Surface is then sanded using sandpaper to even out the surface all as specified and as directed.
M&L for applying one coat of weather proof acrylic exterior paint (100% Acrylic) (up to 12 th storeys bldgs) including use of scaffoldings all as specified and directed. Make : Apex Ultima or equivalent
M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to four storeys bldgs) including use of scaffoldings all as specified and directed. Make : Apex Ultima or equivalent
M&L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to 14th storeys bldgs) all as specified and directed. Make : Apex Ultima or equivalent
M&L for mild steel props for scaffolding for building of any height ( including high rise bldgs upto and including 14th floors) for repairs of cracks, chipping off loose plaster, preparation of external wall surface or any other similiar work for application of painting all as specified and directed by Engineer-in-charge. Note : Item will be measured and paid as per the coverage area of painting only once for a given location.
M&L for french polishing with two or more coats on new / old surfaces of any description, width or girth after cleaning and fine sanded and making free from any wax and grease, removing it completely (with paint & varnish Remover if required ) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth shining surface using alcohal based shellac finish all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding wherever required for external painting of wooden surfaces all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding where required for external painting of steel surfaces all as specified and directed.
M&L for preparation of old steel surfaces for cleaning and removing loosely inherent material/paint using hand tools wire brush/ scraper (or by sand or grit blasting or wire brushes operated by pneumatic power or electricity to near white metallic surface) or using a power tool such as a grinder, and then washing it off with acetone or thinner or any other water based liquid solvent to get cleaner surface for painting, coating, and welding Prepare the surface by and then applying two coats of epoxy paint (polyurethane aluminium based) over one coat of epoxy primer (zinc phosphate based) as specified and directed by Engg- in - charge. Make : Asian Paints PPG or equivalent.
M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply one coat distemper oil emulsion on walls by an authorised applicator all as specified and as directed. Make : Asian - Tractor or Berger- Bison) all as apecified and directed
M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply two coat distemper oil emulsion on walls by an authorised applicator all as specified and as directed. Make : Asian - Tractor or Berger- Bison) all as apecified and directed
M&L for preparation of old decorated surfaces of ceiling and apply one coat distemper oil emulsion on walls by an authorised applicator all as specified and as directed. Make : Asian - Tractor or Berger- Bison)
M&L for preperation of old decorated surfaces of ceiling and applying two coats of white wash all as specified and as directed.
M&L for applying two or more coats of 100 % premium Acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt and weather resistance exterior paint of required shade and including priming coat of exterior primer applied @ 0.9ltr /10 Sqm over new surface all as specified and as directed.
M&L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 3mm thick average on plastered surfaces including rubbing with sand paper, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer all as specified and as directed. Make : Asian - Tractor or Berger- Bison)
M&L for writing letters or figures (block. Roman, Italic or Indian) n exc 30cm, letters shall be painted with thick paint all as specified and as directed.
Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles and debris outside of MD land all as specified and directed.
M&L for first and premium quality of glazed ceramic coloured digital tiles 600mm x 300mm or 405mm x 250mm x 6mm to 7m thick in dados, riser to steps set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in CM 1:4 all as specified and directed.
M&L for 35-40 mm thichk machine cut cudappa stone slab in horizental/vertical jambs laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing & rounding to edges of slab as in window cills/jambs including screed bedding 10mm thick in CM 1:6 all as specified and directed by Engineer-in-charge..
M&L machine grinding/rubbing/polishing to Terrazzo/Kota stone tile surfaces to mirror finish all as specified and directed.
RAMESH ENTERPRISES
Frends Enterprises
K.C.P ENTERPRISES
RUPESH CONSTRUCTION CO
Angrahit Services Trading Co
Unitech Enterprises
NATH CONSTRUCTION
Bright Construction Co
Bidder Name
Unitech Enterprises
Frends Enterprises
K.C.P ENTERPRISES
RAMESH ENTERPRISES
NATH CONSTRUCTION
Bright Construction Co
SHREE JAGDISH FURNITURE CO.
Angrahit Services Trading Co
RUPESH CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .