PROVN OF 03 X TOILET BLOCKS AT 02 X AATS AND 01 X 411 (I) PARA FD COY, PROVN OF UNDERGROUND CABLE IN REPLACEMENT OF OVERHEAD CONDUCTOR AND SPL REPAIR TO TOILET BLOCK NO BCD/2 AND 3 AT AATS UNDER GE (EAST) AGRA

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shaft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in fdn filling and mass concrete complete all as specified and directed.

M&L for old size brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L Brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6) for wall complete all as specified and directed.

M&L for Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance n.exc 50Mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring 100 mm thick complete all as specified and directed.

Cement concrete type D-2, 1:4:8 mix (using 40mm graded stone aggregates) as in Sub base of flooring of 75mm thickness complete all as specified & directed.

M&L for rough dressed sand stone slab 30mm thick flooring bedded and jointed in cement mortor 1:6 and pointed in cement mortar 1:3 except stone complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded mechanically crushed stone aggregate) as Damp proofing compound 40 mm thick with water proofing compound @ 3 by weight complete all as specified and directed.

M&L for applying Bitumen grade 85/25 @ 1.5 Kg/Sqm for damp proof treatments over dry DPC complete all as specified and directed.

M&L for 75mm thick PCC floor (1:3:6) type C2 (using 20mm graded stone aggregate) for plinth protection with using extra cement complete all as specified and directed.

M & L for rendering 15mm thick on other than fair face of brick work in CM 1:6 in wall finished even and fair etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound as per manufacturer instructions finished other than fair (WPC shall be measured and paid separately) complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (integral) complete all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing all as specified.

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer (self primer) complete all as specified and directed.

M&L for Preparation of newly plastered ceiling surfaces and applying two coats of white washing complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and above as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for mild steel TMT bars 06 to 8mm dia and above as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item 23.00 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L Reinforced cement concrete Nominal mix Type B-1 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete Nominal mix Type B-1 1:2:4 (20mm graded aggregate)in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete Nominal mix Type B-1 1:2:4 (20mm graded aggregate)in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete Nominal mix Type B-1 1:2:4 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m complete all as specified and directed.

All as per item No 28.00 above but for chhajas and similar work complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to soffits of suspended slab such as roof slab, floor slab, wall and landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with rough finished surfaces of concrete complete all as specified and directed.

All as per item No 32.00 above but sides and soffits of beams, lintel and etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

S&F of Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F of powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 4 mm thick Figured glass, pinhead type in squares n exc 0.5 sq. m each pane and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed.

M&L for PVC (SWR) floor trap plain with grating including jointing with solvent cement of diameter 75/100 mm complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls, floor etc complete all as specified and directed.

S&F for PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 mm - 2 1 0 gms . /25mm-455gms/ 40mm - 690 gms) complete all as specified in SSR Part I.

Cutting chases, pining in making good in CM 1:3 for concealed water tubing, cutting n. exc 10 cm complete all as specified and directed.

S&F for 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S & F 5 mm dia GI tubing medium grade with all fittings laid/fixed in any trenches complete all as specified and directed.

S&F 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F of 20 mm bore ball brass valve high pressure with polyethylene float and fly nut screwed for iron pipe complete all as specified and directed.

M & L glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces such as skirting/dado etc set incl jointed in neat cement slurry 10mm thick in CM 1:3 for fixing tiles & pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in 7mm thick as in floor etc set incl jointed in neat screed bed or bedding layer of mortar 15 mm thick in CM 1:6and pointed in white or coloured cement to match complete all as specified and directed.

S&F vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests "P" or "S" or trap (excluding flushing cistern & flush pipe) incl provisioning of lime concrete bedding complete all as specified and directed.

S&F PVC flush cistern 10 Ltr capacity low level with inlet ball valve syphonic system etc complete all as specified and directed.

S& F single piece EWC with UF seat cover hinges, fixing accessories set, cistern fittings, rim Less tornado flushing size 360 680x750 including PVC P or S trap 75mm complete all as specified and directed.

S&F bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F Angle valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed to bore of pipe 15 mm, complete all as specified and directed.

S & F wall mixer cast copper alloy chromium plated screwed for 15 mm dia pipe including PVC connection etc complete all as specified and directed.

S&F Vitreous China wash hand basin white flat back/oval shape(table top) size 550x400mm including Waste fittings, brass, chromium plated(32mm) for glazedware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix CP Central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete etc complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply & fixing C.P. grating 100/125(with or without hole) mm dia as reqd at site complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for in steps, jambs, pillars, window-cills, cooking platforms and like cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite moulding of edges, screed bed/ backing coat and rubbing, polishing complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified and directed.

S&F CP brass towel rail 60cm long including fitting complete all as specified and directed.

S&F PVC waste pipe fitted with 32 mm dia waste coupling for wash hand basin etc complete all as specified and directed.

Supply & Fixing Vitreous China full stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

Supply and fixed PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube. Fixing in opening as per specification and all as per drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing.

Supply & fixing of Aluminium alloy, 250mm long anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm long Aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, colled rolled stainless steel complete all as specified and directed.

S&F 150mm long aluminium handle, cast type anodized complete all as specified and directed.

S&F of PVC connection pipe 15 mm dia 450 mm long with PTMT nut fixed complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment with 3mm thick APP modified polymeric water proofing membrane with non woven polyester mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (e) Applying two coats of aluminium paint @ 100 gm /sqm (each coat)

S&F 150mm dia SGSW pipe exc, in ordinary soil at average depth of 1.50M, inclusive of manholes RCC precast manholes cover having 6mm MS plate embedded all around/fibre reinforced cover with angle iron frame pipes laid on Moorum bedding, complete all as specified and directed.

M&L For Cement Concrete using 1:4:8 type D2 bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

M&L Providing precast cement concrete as in manholes covers 1:2:4 mix type B1, using 20mm graded stone aggregate set in CM 1:4 complete all as specified and directed.

S&F White Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap fixed complete all as specified and directed.

S&F in repair 15 mm bore pillar taps copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for Preparing old plastered surface to prepare the surface even and smooth and two coat of white wash on ceiling complete all as specified and directed.

Preparing old plastered surfaces of wall and applying one coats of cement base paint over a coat of cement primer complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n. exc 1.5 Sqm each complete all as specified and directed.

S&F of Steel ventilator fixed type with glazing bar, complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed.

M & L for preparing old steel surface and applying one coats of synthetic enamel paint over 10 cm width or girth, not otherwise described complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but n.exc 1000 ltr complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections etc complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections etc complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connections etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic (floor, dado) including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

S&F in Repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe and including concrete bedding) complete all as specified and directed.

S&F in repairs bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repairs Angle valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed to bore of pipe 15 mm complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back/oval shape(table top) size 550x400mm including Waste fittings, brass, chromium plated(32mm) for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 15 mm bore pillar taps copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs CP soap dish complete all as specified and directed .

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified.

S & F in repair Brass shower rose chromium plated size 125mm of any colour for fixing with 15 mm pipe (Min wt 40 gms) complete all as specified and directed.

Taking down AC/PVC rain water pipe of 100mm/75mm dia complete all as specified and directed.

S & F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joinets fixed to walls of 75 mm bore incl taking down old un serviceable pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bend any radius suitable for 75 mm bore pipe provided with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.

Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed.

Material and labour for applying 15 mm thick plaster in CM 1:4 including water proofing compound @ 2% by weight of cement finished even and smooth complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for coloured Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and finished with grey cement and pigment and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of 60mm thickness complete all as specified & directed.

M&L for Non-skid coloured designer Pattern ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for coloured glazed ceramic tiles (designer Pattern) in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10 mm thick rendering in CM 1:4 on brick wall complete all as specified & directed.

M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified & directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening preparatory to distempering on surfaces walls complete all as specified and directed.

S&F stop valves/angle valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 15mm dia, fixed complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Factory Made Solid PVC Moulded Door Shutter(with wood free EPS), 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S & F 300 mm long aluminium alloy, anosised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts of extruded sections complete all as specified & directed.

S&F 100 mm long Mild steel butt hinges, medium weight, coled rolled and fixed complete all as specified & directed.

S & F 150 mm long extruded handles, fabricated type, aluminium anodised complete all as specified & directed.

S&F steel ventilator with top hung shutters including hinges, steel peg stay & frame inserted to concrete, complete all as specified & directed.

M&L for applying two coat of synthetic enamel paint on new steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified & directed.

S&F 800mm x 450 mm frameless wall mirrors, Bevelled frameless wall mirror fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.

S&F 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.

S&F stainless steel (chromium plated) folding 600mm towel rack for toilet complete all as specified & directed.

S&F toilet paper holder white of vitreous china fixed to walls with screws box type complete all as specified & directed.

S&F 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door complete all as specified & directed.

M&L for providing Cement Concrete 1:3:6 Type C1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & directed.

S&F joist, channel, angle or tee sections fixed independently without connecting platges etc (cut to ordinary length) including welding to other steel members of Fe 410 Gde complete all as specified and directed.

M&L Brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed.

S&F brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed.

S&F CP stainless steel towel ring complete all as specified and directed.

S&F 25 mm dia PVC coated metallic fancy type of approved finish curtain rod incl. brackets and fancy type end knobs, rings etc complete all as specified & directed.

S&F in repair Vitreous China urinals, but half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe and including Vitreous china urinal partition white of size 310x700 mm. (Minimum weight 60gms) cistern, trap and waste pipe) complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete and all as specified and removing from site complete all as specified & directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, sunken including 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note : Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch.

One 3 pin socket outlet 5 amps on the same board with other switches all as specified and directed.

One 5 pin socket outlet 5/6 amps on the independent board complete all as specified & directed.

All as per item No 139.00 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm complete all as specified & directed.

Supply and fix switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified & directed.

Supply and fixing piano switch 16 Amp, 240 volt complete all as specified and as directed.

Supply and fix socket 5 amps 5 pin flush type, 240 volts with polycarbonate body complete all as specified & directed.

Supply and fixing 16 Amp socket, multipurpose complete all as specified & directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified & directed.

Supplying and fixing 20 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified & directed.

Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified & directed.

Supply & fixing LED security light compact & trendy of 35 watt with aluminium pressure die cast housing, IP 65 protection, luminaire lumens > 3000 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, multi stage constant current operated driver with range 150-270 VAC and safety exra low voltage safe load < 60 VDC as per IEC standards with LM 70 & 80 certification complete all as specified, fixed to pole or wall of buiding with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 50x6 mm to be tightened with suitabe size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified & directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified & directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link complete all as specified & directed.

Supply and fixing MCB SP 1 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Supply and fixing MCB SPN 40 to 63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering, GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 complete all as specified and as directed. NOTES :- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanised iron strip 25x4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 32mm GI light grade pipe for earth strip protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and fix exhaust fan (copper winding) steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified & directed.

Supply, fix and installation of electric water heater, storage type made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology S/S inner tank and heating element heavy duty magnesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW capacity,230 V, 1 Phase AC, 50 Hz, 50 litre, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating element offers superior heating performance and resistance to oxidation and carbonation at high temperatures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified & directed.

Supply and lay of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 Core, complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified & directed.

Supply and laying in replacement GI tube light grade 25 size as in cable protection pipe including all fittings complete all as specified and directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified & directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core, complete all as specified & directed.

Dismantling of old unserviceable ACSR complete any size and any type complete all as specified & directed.

Dismantling insulators any type and any size complete all as specified & directed.

Dismantling cross-arms of M.S. channel or angle sections, GI Wire, nuts and bolts of any size/type retrieved from Overhead lines complete all as specified & directed.

Dismantling of Service wire of any size or type complete all as specified & directed.

Dismantling of LT cable of any size and any type complete all as specified & directed.

Dismantling of LT electric pole 9 mtr long complete all as specified & directed.

Material and labour for sand cushioning with dry river sand unwashed in trenches for cushioning of underground cable line including spreading, leveling, gently pushing around cable completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified & directed.

Supply and laying HDPE pipe medium class, ISI Marked double wall corrugated as in cable protection pipe of outer dia 40mm including all fittings complete all as specified and directed.

Supply and laying HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 50 mm including all fittings complete all as specified & directed.

Supply and laying HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 63 mm including all fittings complete all as specified & directed.

Supply and laying HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 90 mm including all fittings complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of 40 mm to 90 mm bore HDPE pipe of any description below/under existing road surfaces / floors at a level not less than 0.60 metre etc with using mechanical or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and as directed. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt.

Supply, erecting fixing of steel tublar swaged pole (410 SP -31) 09 Mtr long, conforming to IS 2713 (Part - I and III) 1980 complete with cast iron base plate, pole cap / finial taper plug, bolts , nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including 2 coats of black bituminous paint internally and externally upto planting depth and remaing exterior portion of pole finished with two coat of synthetic paint in 30 cm wide bands/strips around the poles alternetalty with black and red redium strips up to height of 1.5 Mtr from top of PCC coping of the pole and incuding writing pole No in 8 cm height letter with black enameled paint in a circle of 20 cm dia with base of synthetic enamelled paint (Colour approved by GE) on pole at above top most band and including necessary excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50 mtr PCC (1:4:8) type D-2 (using 40mm graded sand stone aggregate ) in the base and foundation upto ground level and PCC (1:3:6) type C-1 (using 20 mm graded black trap/granite/basalt stone aggregate) for coping as per TD drawing complete all as specified and directed. Note :- Cross arms, danger nptice board, anti climbing device shall be measured and paid separately.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 10 sq mm 4 core in trench/floor/on pole/wall, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 16 sq mm 4 core in trench/floor/on pole/wall, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 25 sq mm 4 core in trench/floor/on pole/wall, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 120 sq mm 3.5 core in trench/floor/on pole/wall, complete all as specified and directed.

Supply & fixing , Rigid non-metallic PVC conduit of size 20 mm dia ISI marked heavy duty (fixing from junction box to street light on pole) for passing cable of size 2.5 Sqmm 2 Core, including clamps made out of MS flat 25x6 mm and necessary nut, bolts and washers, complete all as specified & directed.

Supply and fix junction/looping box polycarbonate alongwith clamps complete, pole mounted right hinged looping box of size 300mm x200mm x105mm with MCB SP 6 Amp capacity, aluminum bus bar-4 Nos fixed on ebonite insulator suitable capacity for 3 phase and neutral complete with necessary MS clamp made of 25 x3 mm MS flat, bolts, Nuts, washers etc for fixing to steel tubular /rail pole including all accessories complete all as specified and directed.

Supply, fixing, installation, Testing and Commissioning Outdoor type cubicle Bus Bar aluminium Chamber 400 Amps for three phases, 4 wire IP-65 protection rupturing capacity at 415 volts , factory made having powder coating including necessary angle iron and PCC foundation of size as directed and earth work complete all as specified & directed.

Supply, installation, fixing, CRCA Sheet, MCCB Enclosure 2mm thick for MCCB of capacity 250/200/160/100 Amp, rupturing capacity at 415 volts , factory made having powder coating including necessary grouting on walls and make good to disturbed surfaces, complete all as specified & directed.

Supply and fixing in repair MCCB 4 pole, 400 Amps, 50 Hz, Icu=50 KA at 415 volts with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics = 100% with adjustable over load setting (minimum 70% to 100%) value from 10 to 15 times of related capacity as per IEC-60947-1 and 60947-2 standard complete all as specified and directed.

Supply & fixing LED security light compact & trendy of 60 watt with aluminium pressure die cast housing, IP 65 protection, luminaire lumens > 3000 lumens/W and in built electronic driver prewire upto terminal block with driver efficiency > 85 %, power factor > 0.95, as per IEC 61000-3-2, colour temp 6500 K Surge protection 3.5 KV, 50000 burning hrs (min) as per L70 Criteria, fixed to pole or wall of building complete all as specified & directed.

Supply & fixing Bracket for security lights made out of 40 mm dia GI light grade pipe, 1.20 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 50x6 mm to be tightened with suitable size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 Sqmm including all accessories and fixing arrangements for fixing the light fitting complete all as specified & directed.

Material and labour Cable Route indicator showing "MES LT U/G 11/1.1KV" size 1m height X 60cm wide X 10cm thick tapered on top) and route of cable with arrow (Embossed or engraved) made of RCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) 50 mm thick reinforced with 8 mm dia TMT bar at the rate of 100 mm centre to centre in suitable shape and size 60 cm x 30 cm x 50 mm thick fixed in PCC block 1:2:4 type B-2 (using 40mm graded aggregate)(size of block 30cmx 30x15cm) of 30 cm below ground level and 30cm above ground to show clear indication of cable including painting the complete slab with red paint and marking the engraved/embosed letters/arrow with white paint complete all as specified & directed. Note :- Quoted rate shall be deemed to included the cost of excavation, returning, filling and removal of excavated earth upto a distance of not exceeding 30 mtr.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, 4 Sqmm one twin core cable flat or circular complete all as specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building with and including suitable Bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with two Nos of FI clamps 35x6 mm to be tightened with suitable size of bolts, nut and washers and including painted with two coat of aluminium paint over a coat of red oxide primer, and including connecting the fitting to electric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed.

S&F sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in conduit not less than 20mm, complete all as specified and directed by Engineer-in-charge including taking down of existing un serviceable sub main wiring complete.

Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Shiva Enterprises (BID ID -3078417)

VASUNDHARA AND COMPANY (BID ID -3067735)

3Krishna Enterprises (BID ID -3066983)

M/s Laxmi Associate (BID ID -3067743)

Attar Singh and Sons (BID ID -3068573)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3068648)

VARDMAN ENTERPRISES (BID ID -3066933)