Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹31.3 L+₹19,019 (0.61%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹32.2 L+₹1.1 L (3.39%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹32.7 L+₹1.6 L (5.05%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹35.4 L+₹4.3 L (13.8%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹36.7 L
EMD Value
₹73,400
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIR OF BLDG NO T-101 AND WORK AGAINST MINOR WORK NO 12 UNDER GE (EAST) MATHURA
2022_MES_564622_1
8200-1306/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE EAST MATHURA
₹73,400
Yes
9 Jan 2023
22 Nov 2022
21 Dec 2022
22 Nov 2022
19 Dec 2022
12 Dec 2022
22 Nov 2022 - 19 Dec 2022
Amount
Dismantling Asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screw complete all as specified and as directed.
Dismantling timber scantlings (framed work) 40 sqcm and over in section, in any position complete all as specified and as directed.
S&F rolled mild steel work in tubular trusses, verical posts including special shaped washer, purlins, rafters, angle cleats, fish plates, gusset plates, base/bearing plates, bolts and nuts etc. conforming to 1161-1979 grade St-248 complete all as specified and as directed.
S&F mild steel flat iron wind ties for roof including all necessary drilling, bolting or riveting etc conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed plates, coping etc slightly rounded or charfered angles and throating etc. complete all as specified and as directed.
Demolition of brick work built in cement mortar including all quoins arches, pillar etc complete all as specified and as directed.
M&L brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Taking down cement plaster of any description from brick wall or concrete surface including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of Brick work or concrete surface in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid WPC as per manufacturers instructions finishing the surface even and fair complete all as specified and as directed. Note : Liquid WPC shall be mesured & paid separately under relavent item of this BOQ.
Supply only liquid water proofing compound of approved make complete all as specified and as directed.
M&L preparation of new plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directeed.
M&L preparation of new plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for 50mm thick cement mortar 1:3:6 type C-1 (using 20mm graded stone aggragate) as in plinth protection surface finished even and smooth without using extra cement complete all as specified and as directed.
Dismantling, stone slabs of any description or thickness in floors/laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking down shutters from frames) area exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.50 square metre in each pane complete all as specified and as directed.
M&L for Pressed steel frames of size125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. supplied and fixed complete all as specified and as directed.
M&L cement concrete type C-0 1:3:6 (using 12.50mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of back of pressed steel frame etc. complete all as specified and as directed.
S&F 35mm thick IInd class hard wood plain framed, panelled factory made shutter (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F in repair Harrison curtain rails, mild steel, chromium plated with fixing brackets stops, roller etc complete as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.
S&F extruded aluminium handles of size 150mm long fabricated type anodised complete all as specified and as directed.
M&L for stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in coping, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar 1:4 complete all as specified and as directed.
M&L for chequred cement concrete tiles of size 30cm x 30cm x 25mm with grey cement and pigments, set jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets complete all as specified and as directed.
M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint for all hights complete all as specified and as directed.
M&L 4mm thick non asbestos fibre cement building boards (IS-14862) fixed or laid/inserted to timber/GI/Aluminium frame work fixed with screws complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, manholes laying of cable pipes etc. and getting out in soft/loose soil complete all as specified and as directed.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L for reinforced cement concrete 1:1½:3 type A1 (using 20 mm graded crushed stone aggregate) as in chajja's complete all as specified and as directed.
M&L for form work to chulla hoods, chajja's, throughs and similar item(s) icluding edges for rough finished surface of concrete complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to lenth, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or secring with clips completd all as specified and as directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 450x300x7mm/300X200x7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.
S&F in repair 15 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F in repair 20 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.
S&F in repair 25 mm bore steel water tubing, medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and as directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but n exc 20cm girth of brick walls complete all as specified and directed.
S&F in repair stop valves/Angle cock cast copper alloy chromium pated fency type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore dia iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down screwed for 15mm bore dia iron pipe complete all as specified and as directed.
S&F in repair pillar taps, cast copper allloy, with capston heads, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shank and fly nuts, screwed fo iron pipe 15mm bore dia of pipe complete all as specified and as directed.
S&F in repair Vitreous China Urinal, Half stall type, white fixed to walls including CP urinal spreader , waste coupling and waste pipe complete and connection complete all as specified and as directed.
S&F in repairs white Vitreous china wash down water closet (pedestal pattern) including fixing bolt, PVC flushing cistern 10 liter capacity, CP waste coupling for 32mm bore discharge pipe including waste pipe complete all specified and as directed.
S&F Vitreous China wash basin, white, (flat back or angle back type) any size including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling for 32mm bore pipe discharge pipe including waste pipe complete all as specified and as directed.
Supply and fix in repair rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) 1000 liters capacity white colour triple layer, hoisted and fixed on roof in position including all connections complete all as specified and as directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20 mm iron pipe complete all as specified and as directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore dia of iron pipe complete all as specified and as directed.
S&F in repair PVC (SWR) multifloor trap 75 mm dia of outlet with CP grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair PVC (SWR) floor trap 75 mm dia of outlet plain with CP grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repair PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed.
S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore bends any radius complete all as specified and as directed.
S&F in repair PVC (SWR) 110mm bore junction single, (Single T) equal or unequal with access door all as specified and as directed.
S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
S&F PVC (SWR) 75 mm bore bends any radius with acess door complete all as specified and as directed.
Returning filling in soil including spreading levelling watering and well ramming in layers not exc 25 mm thick complete all as specified and as directed.
Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.
M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed complete all as specified and as directed.
M&L cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as bedding and haunching against sides of 150mm bore drain pipe after they are laid and tested complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
Add or deduct for serial item No 82.00 for forming fair finished channel or drain for each 25mm girth or part thereof over or under 30cm complete all as specified and directed all as specified. Note : This item is only for adjustment of rate if applicable
M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed.
M&L for pre-cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in manhole cover slab including form work etc complete all as specified and as directed. Note : Reinforecement shall be measured and paid separately.
Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surface of concrete complete all as specified and as directed.
S&F for mild steel round bar or TMT bars 12 mm dia and over in reinforcement cut to length bent to shape reqd incl crancking, bending, binding, hooking end etc and binding with MS annealed with MS binding wire not less than 0.9 mm dia including supply of binding wire complete as specified and as directed.
Excavating in post holes (or similar holes) n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.
M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for surface excavation n exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for 25 mm thick Sand filling under floors including watering and consolidation for laying paver block complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.
M&L for providing cement mortar 1:3:6 type C-1 (using 40mm graded stone aggragate) as in copings, kneelers, apex stones, bed plates, kerbs complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block(with grey cement and pigment) any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 Grade complete all as specified and as directed.
Taking down carefully aluminum/copper point wiring (light, fan, socket any type, power, bell etc. complete including fixtures (such as ceiling rose, socket, Pendent, regulator etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.
Taking down carefully Submain wiring of any size and type complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DBs/enclousers any size and type/any descriptions including MCBs any type and making good disturbed surface of walls to match the existing surface complete all as specified and as directed.
M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less than 20mm dia) and its all accessories complete concealed in wall/roof incl cutting & chases and making good the disturbed surfaces to match the existing surface including modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multi strandered of 1.5 Sqmm size in green colour complete all as specified and as directed for the following:-
One light/fan point controlled by one way modular switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way modular switch on the same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way modular switch on independent board complete all as specified and as directed.
All as per item No. 98.00 here-in-before but for 3/5 pin 16 Amps socket outlet with 2.5 Sqmm PVC insulated and unsheathed (FRLS) copper conductor cable independent point wiring complete all as specified and as directed .
M&L for Sub Main Wiring with two runs of single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof incl cutting & chases & making good to the disturbed surfaces to match the existing surface with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed. Note : Two runs of 6 Sq mm (P&N), one run of 6 Sq mm earth cable & One run of PVC conduit will measured as one RM.
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals isolated body complete all as specified and as directed.
S&F Modular switch single pole one-way, 6 Amps 1 Module complete all as specified and as directed.
S&F Modular switch single pole one-way, 16 Amps 1 Module complete all as specified and as directed.
S&F Modular fan Regulator electronic step type 120 watt, 2 Module complete all as specified and as directed.
S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.
S&F Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED 9W lamp suitable for normal (Base Cap B22) type holder complete all as specified and as directed.
S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder coated with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V complete all as specified and as directed.
S&F in repairs MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed.
S&F MCB SPN 40 to 63 Amps, 'C' series, breaking capacity 10KA, 415V complete all as specified and as directed.
S&F MCB SP 6-32 Amps, 'C' series, breaking capacity 10KA, 240V MCBs complete all as specified and as directed.
Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed.
M&L building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as directed. Note : Taking down old unserviceable bracket any size/description.
Taking down the ceiling fan/exhaust fan of any sweep carefully from its installed position, dismantling complete with down rod replacement of ball bearing capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed. Note : The spare parts (ball bearing) required shall be measured and paid separately under relevant items of BOQ as supply only.
Supply only ball bearing suitable for ceiling fan complete all as specified and as directed.
M&L for removing the defective ceiling fan 1200mm/ 1400mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding and make the fan fully functional complete all as specified and as directed.
S&F exhaust fan, steel body AC single Phase 50Hz 230V of size 300mm sweep with, blades, and frame and louvers and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
M&L for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete all as specified and as directed.
Taking down unserviceable cable any size and description and make complete all as specified and as directed.
Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of laid in trenches/duct/ fixing on wall walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less than 40mm) including connecting with suitable lugs, glands nuts and bolts in existing panel from pole/Main panel box an testing complete all as specified and as directed for the as following size of cable:- Note : Quoted rate of item shall deemed to be inclusive of cost of HDPE pipe.
25 Sqmm 2 core
10 Sqmm 2 core
S&F Plastic Surface mounting box 8 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.
Supply and fixing of ceiling fan 1200mm sweeps, AC 230 Volt single phase five star rating including fixing accessories complete all as specified and as directed.
S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder coated with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V complete all as specified and as directed.
Supply & fixing MCB SPN 6-32 Amps, 'C' series, bracking cap 10KA, 240V complete all as specified and as directed.
SHRI JI ENTERPRISES
M/S ANIL KUMAR
MISHRA CONSTRUCTIONS
M/S PREETI CONSTRUCTION
brajcon
Deepak Saxena
ARCHI ENGINEERS
M/s Hoti Lal Contractor
subhash construction co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .