ADDITION/ ALTERATION OF BLDG NO. T-101 INCL BATHROOM FOR HQ CIF(R) UNDER AGE(I) CIF(R)

Amount

Excavation in trenches in any type of soil n. exc 1.5m wide & n. exc 1.50m in depth for foundations for shafts, wells, cesspits, manholes, pier holes & getting outhard and dense soil complete all as specified and directed

Material and labour for plain cement concrete 1:5:10 type E-2 (using 40 mm graded aggregate), as in foundation filling and mass concrete, complete all as specified and directed.

Removing excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 using old size bricks complete all as specified and directed by engr-in-charge.

Brick work with sub-class `B' bricks,old size straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed by engr-in-charge.

M&L for rendering 15mm thick on external faces of brick or concrete surfaces in cement mortar (1:4) on walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper over a coat of primer, complete all as directed by engineer-in-charge

M&L for rendering 10mm thick on internal faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth without using extra cement complete all as specified .

M&L for preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets complete.

S& F in position suspended anodised aluminium false ceiling grid system using E-gird suspended ceiling grid system.The size of grid shall be 605X605mm fixed in the grid of E-grid susended ceiling grid system duly suspended by 6mm dia GI(upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3 mm size long and expantion hold fastencer 12.5mm dia 40mm long and 6mm thick calcium silicate boards of silicous and calcareous material reinforced with cellulous fibre for fixing in 600X600mm grid complete all as spcified and dircted.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engr-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm/450x350x7mm thick laid over 10mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by engr-in-charge.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed.

Material & Labour for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 10mm thick in cement mortar (1:4) base, complete all as specified.

M&L Vetrified Ceramic tiles ( light shade) 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 10mm thick in cement mortar (1:4) base, complete all as specified.

All as per ser item No 20.00 here in before but skirting over 10mm thick rendering in cement mortar 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per pecification & drawing. complete all as specified and directed.

Supply & fixed aluminum anodized, barrel tower bolts of extruded section 150mm long ISI marked complete all as specified.

Supply & fixed mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified.

Supply & fixed extruded aluminum alloy handles, fabricated type, anodized 150mm long, complete all as specified.

Dismantling of mild steel or wrought iron work of any description not otherwise provided for complete all as specified.

Supply and fixing tubular steel work in vertical posts, rafters, purlins, etc including special shaped washer and structural steel , etc.complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified.

S&F mild steel work as in wind ties for roof including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level including stone/tiles any type complete all as specified and directed.

M&L 50mm thick PCC (1:2:4) type B-1 (using 20mm graded coarse aggregate ) over 75mm thick PCC (1:3:6)type C-2 (using 40mm graded coarse aggregate ) laid to an outward slope 1:12 as in plinth protection complete all as specified and directed.

Dismantling water tanks exc 250 & n exc 500 ltr and removing to store complete all as spcified and directed.

S&F rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories complete, all as specified .

S&F 20mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified.

Reinforced cement concrete (nominal mix)in beams, cantilevers, bressummers, lintels over 1.5 m span/band etc. Cement concrete B0 type, 1:2:4 mix (using 12.5 mm graded aggregate) including necessary form work, complete all as specified and directed.

Material and labour mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Material and labour mild steel TMT bars, 5mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in bed plates, copings, etc incl necessary form work complete all as specified and directed by engr-in-charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engr-in-charge.

M & L for prepering old painted steel suraces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint match to the existing colour complete all as speciied and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store as directed.

S&F steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor, wall and on ceiling, complete all as specified and directed .

Supply and fixing in repair, bib tap long nose screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, screwed down suitable for 15mm bore pipe or union, complete all as specified.

Supply and fixed in repair stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with crutch or butterfly handle (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete all as specified.

Supply and fixing in repair angle valve, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with capstain head, heavy with adjustable wall flange, complete all as specified.

Supply and fixed in repair fancy type, shower rose 125mm size , brass Chromium plated, revolving type, fixed to existing steel pipe or union 15mm bore complete all as specified.

Supply and fixing in repairs, chromium plated, hot and cold , central hole wash hand basin mixer, fancy type , complete all as specified.

S&F in repair snow white one piece EWC Model Name: CASINO 660X350X760 S trap 220mm with soft colse seat cover, including fixing with screw/bolts complete all as specified.

Supply & fixed in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repairs CP brass towel rail 60CM long including fitting complete all as specified.

Supply & fixed in repair PVC connection 15mm size with brass nuts of length 450mm complete all as specified.

Supply & fixed in repair Health facuet (ABS Body) mild steel chromium plated sutiable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incuding making connections and fixed in position complete in all respected as spcified as in repairs complete.

S & F Brass chromimum plated bottle traps of bore 32mm for wash basins/sinks with inlet and outlet screwed for pipe or connections including necessary packing,union and cap and fixed as in repirs including old complete.

S & F Toilet paper holder with flat recessed type stainless steel chromimum plated (CP) brass screws fixed to wall all as spcified and directed.

S & F PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore.

S & F 110 mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, laid in trenches and floor, complete all as spcified abd directed.

M&L for concrete bed to drain pipes of bore 150mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified.

S & F PVC (SWR) S traps 110 mm bore, complete all as specified.

S & F PVC (SWR) bends of radius 110mm bore, complete all as specified.

S & F PVC (SWR) vent clow of radius 110mm bore, complete all as specified.

On site CONVENTIONAL type LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, 150 mm thick PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for capacity of 5000 ltr, complete all as specified and directed.

Construction of Soakage well of size 1.2 m dia and 3.0 m effective depth in excavation in any type of soil foundation in PCC 1:3:6 , walls of honey combed and solid brick work in CM 1:4, RCC M-25/SFRC cover slab filling with bats as shown in drg No TD CE/TD-1202/2003 sheet No 1/2 and 2/2 dt 09.10.2003, complete all as specified in drg, complete all as specified and directed. Note : Rate quoted shall deemed inclusive of dewatering during construction if met with.

Demolition of stone slabs and tiles of any description or thicknesss in floor, aprone,etc laid bedded and pointed inany mortar complete all as spcified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified.

Taking down chowkat or frame with shutters n. exc 1.5 a each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkat or frame with shutters exc 1.5 and n.exc 4.0 sqm each (without taking off shutters from the frame) complete all as specified and directed.

S&F for factory made pressed steel frames of size 125 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming including plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) in filling of door frame complete ,all as specified and as directed.

S&F for factory made pressed steel frames of size 105 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming including plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) in filling of door frame complete ,all as specified and as directed.

S&F second class HW Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered article board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete ,all as specified and as directed.

S&F second class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete ,all as specified and as directed.

M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete.

S&F 12 mm thick Veneered decorative plywood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and as directed.

S & F block board 18/19 mm thick medium density fla pressed single line layer type or three layer type with BWR type adhesive fixed with screws to timber frame work as in , cup board shelves etc.

Supply & fixed Hasp and staple size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Continuous (piano) hinges,width of flap 30mm when open mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass including necessary fixing material etc. Size of frame 92.00 x 31.75 x 1.3 mm thick for top and sides, 92.00 x 31.75 x 1.3 mm thick for bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary locking arrangment etc complete all as specified.

Supply and fixing for aluminium powder coated ventilator having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 1.137 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick frosted glass making frame and glass water tightening making it good and Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick etc. Complete all as specified and directed by Engineer-In-Charge.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors .

M & L Chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, over 20mm thick screed bed in CM (1:6) set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed.

M&L 40mm Damp proof course (1::2:4) type B-0 to horizontal or vertical surfaces including necessary formwork

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engr-in-charge.

S&F for curtain rails, anodised aluminium alloy, chromium plated with fixing brackets,

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site for taking credit (credit for above items should be made as per coditions seperately) and making good the old disturbed surface.

M&L for point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size PVC conduit pipe 20 mm dia complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2 mm thick suitable for modular switch/socket of adequate size including iner and outer white cover plate of modular complete all as specified and directed including making good the distrubed surface and matching with existing surfaces for followings :-

One light/fan point controlled by one way switch by one way switch 5 Amp 240 Volt

One three pin socket outlet 5 Amps independent board complete

One 3 pin socket outlet 5 Amps on same board.

one bell/ buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5 Sq.mm size with PVC modular box and cover complete.

M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLSH 2.5 sqmm multi stranded two single copper conductor in including PVC conduit pipe 20 mm dia complete with all accessories and with 2.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2.0 mm thick suitable for modular switch/sockets including inner and outer cover plate of adequate size complete all as specified and directed including making good the distrubed surface and matching with existing surfaces, complete all as specified and directed.

All as per item No 90 here in before but for one 3 pin 5 Amp socket out let on the same board with other switches with cables 2.5 sqmm

Supply and fixing of modular switch single pole one way 6 Amps 1 module complete all as specified and directed

Supply and fixing of modular socket 6 Amps-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing of modular switch single pole one way 16 Amps 1 module complete all as specified and directed

Supply and fixing of modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing of Modular Bell push,6 Amp 230 volts AC,1 Module complete all as specified and as directed.

S&F ceiling rose, surface bakelite 65x50mm three terminals complete all as specified and as directed

Supply and Fixing fan regulator, electronic step type heavy duty modular 2 module 230 volts, 120 watt complete all as specified and as directed.

Supply and fixing of ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified.

Supply and fixing in replacement of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete all as specified.

Supply and fix Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified.

Supply and fixing in replacement LED Bulbs white /warm white (as per demand) in colour of 12 Watt,B-22 base Cap.complete all as specified.

S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply & Fix Ultra modern recess mounting luminaire with high performonging LEDs suitable for mounting with armstrong/grid ceiling 2'x2' LED 36W 6500K or 3000K and connecting up with three core copper conductor cable with Ceiling. Make : Havells Cat part No.LHEBAEP7IW1W036 or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing in replacement of basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver wall mounted LED Batten 20 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.Make : Havells Cat part No.LHEXAWP7UN1W020 or equivalent cat part of make as specified in list of make here-in-after.

Supply and fixing in replacement of Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver wall mounted LED Batten 10 Watt LED, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

Supply and fix in replacement of Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 12 way with 200 amps rated copper busbar complete all as specified.

Supply and fix in replacement 240V rated, 10KA 'C' series miniature circuit breaker (MCB) of SP 6 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fix in replacement 240V rated, 10KA 'C' series miniature circuit breaker (MCB) of SPN 40 to 63 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fix in repair Single pole and neutral enclosure(1P+N+E ) with a two pin and earth plug and socket complete with one single pole 20A MCB all as directed.

Earthing complete in replacement of old/unserviceable with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4.0 mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

M&L GI Earth wire size 04 mm as earth continuty conductor, complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.

Supply and laying , connecting and testing galvanised iron medium grade water tubing with all fittings and fixtures (ISI marked) confirming to IS:1239 laid in trenches or fixed on wall or in any position including necessary saddles and iron clamps complete of following sizes :- Note: Rates quoted includes for necessary scaffolding arrangement.

(a) 20 mm dia bore

(b) 25 mm dia bore

Supply and fix gun metal gate valve confirming to IS : 778/1980 CL-1 with iron wheel head screwed both ends for iron pipe of following sizes:

(a) 20 mm dia bore

(b) 25 mm dia bore

Cutting, Screwing, threading of existing cast iron / GI pipe of 40mm in position for insertion of tee/nipple/gate valve of 25mm bore including fittings viz tee, collar, bend or tail piece etc, complete all as specified & directed.

Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.

Material and labour for sand cushioning with fine dry unwashed sand in trenches for protection of cables complete all as specified and directed.

Material and labour for well burnt bricks,Sub class 'B' bricks, best quality locally available laid flat, dry in trenches for cable protection complete all as specified and as directed

S & F Steel pipe glavanized light grade of 25 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete ass as specifed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 14,126.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/s Rahat Traders (BID ID -3422820)

NATIONAL TRADING COMPANY (BID ID -3416037)

MEHTA OM PARKASH (BID ID -3422522)