GE(S)/M-42/2022-23

Amount

Taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over on other than fair face of brick work finished the surface even and smooth without using extra cement, mixing cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over on fair faces of brickwork finished the surface even and smooth without using extra cement, mixing cement complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of acrylic emulsion exterior paint, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coats of acrylic emulsion exterior paint, complete all as specified and directed.

M&L for complete removal of existing treatment and applying 2mm thick wall care putty for making the surfaces smooth and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old surfaces of ceiling including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 35 mm thick single piece factory made single piece wire gauge door shutter solid PVC UV printed doors wood free consisting of 5mm thick solid PVC sheet on both side ( both side multi colour UV printed) using stee/ aluminium XPM wire mesh and consisting frame made out of MS tubes of 19 guage thickness and size of 19mm x 19mm for stiles and 19mm x 19mm for the top, bottom and lock railswith PVC beading in all around MS frame shall have a coat of metal primers. MS frame shall be covered with heat moulded (Rigid) MS frame welding sealed to the style and with suitable PVC sheet beading and jointed together with solvent complete as per direcrtion of Engr-in-Charge and as per manufacturers specification and drawing. Note :- The shutter is to be fixed with 50mm size self drilling star screw full threraded.

S&F 35mm thick H.D.F prelaminated (Wenga/Teak colour) moulded shutter 35 mm thick puf (poly urathane foam) insulation with minium density 40kg/cum filled in between two HDF sheets of thickness 3.2 mm both & border covered with 10 mm thick PVC sheet complete in all respect with lock rail & beauttified by PVC beading all round with PVC solvent, complete all as specified and directed

S&F Solid PVC door frame wooden high density filament (HDF) double rebated of size 50mmx95mm processed with polymer fins and different wood fibre, fixed to opening including necessary lugs/hinges, lock strike plate etc complete all as specified and directed.

S&F Factory made UV wood grain printed panelled/plain PVC single piece door shutter 30mm thick style, consisting of frame made out of MS tube 19 guage thickness & size of 25mmx25mm for stiles, top and bottom rails. MS frame shall have a coating of steel primer, the frame shall covered with heat moulded wood grain UV printed PVC sheet tap fixed in MS frame welded to the stiles and rails with suitable PVC sheet beading and jointed togetherwith solvent cement, fixing in frame at site complete all as manufacturer's specifications and ditrected by Engineer-in-charge.

S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed.

S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-026/13 sheet 1/5 to 5/5 dated 11.09.2013.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, including,complete all as specified and directed.

S&F GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F "as in repair" GI wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium handle, cast type, anodised complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F 100mm long aluminium alloy, anodised hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed.

S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.

S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste coupling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F "as in repair" stainless steel kitchen plate rack of size 750mmx900mm, made of stainless steel 1mm thick overall (weight not less than 9 kg), fixed with plastic plugs and mild steel screws, complete all as specified and directed.

S&F "as in repair" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed.

S&F "as in repair" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed.

S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.

M&L in repair for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L in repair for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F PVC corner shelf assembly consisting fixing with chromium plated bracket guard complete all as specified and directed.

S&F "as in repair" 20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed.

M&L for marble work (Green / Black marble Bhaislana Zebra) 18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, complete all as specified and directed.

M&L for repair work of machine cut kota stone slab flooring/ treads of steps 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges (if required) complete all as specified and directed.

M&L for machine cut granite stone wall clading 20mm thick over and including 20mm thick screed bed in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges (if required) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.

S&F in reapirs Cast iron floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in reapirs Cast iron floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in reapirs Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking down old/broken cast iron pipes of any dia from existing lines fixed to walls with clamps or laid in trenches (Including necessary excavation).

M&L 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps.complete all as specified and directed.

M&L 100 mm dia sand cast CI Bends with ovel access door and jointed with neat cement paste complete all as specified and directed.

M&L 75 mm dia sand cast CI Bends with ovel access door and jointed with neat cement paste complete all as specified and directed.

M&L 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps.complete all as specified and directed.

M&L 75 mm dia Cast iron cowls complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia CI pipe.complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia CI pipe.complete all as specified and directed.

M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, balcony railing troughs and similar works (Horizontal or sloping) including edges complete all as specified and directed.

M&L for Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces complete all as specified and directed.

M&L for Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete complete all as specified and directed.

M&L for Form work to sides and soffit of floor or roof beams, beam haunching, lintel sides and soffits (if any) for rough finished surfaces complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, including demolition of existing concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in fdn, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete. complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in beams, cantilivers, bressummers, lintel over 1.5m span. complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed.

M&L for dismantling of existing brick tiles laid bedded, and pointed in any mortar as in Roof Top complete all as specified and directed.

M&L for 40mm thick fly ash brick tiles laid on 15mm thick cement plaster on roof top in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane including dismantling of existing brick tiles, complete all as specified and directed.

M&L for 40mm thick fly ash brick tiles (EXCEPT TILES) laid on 15mm thick cement plaster on roof top in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane including dismantling of existing brick tiles, complete all as specified and directed.

Supply only integral water proofing compound. complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for 75mm PCC 1:4:8 type D-1 (using 40 mm graded aggregate) as in sub base finished the surface even and smooth using extra cement complete all as specified and directed

M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in kerbs of interlocking tiles complete all as specified and directed

Demolition and breaking up drain pipes ( Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 100mm bore. complete all as specified and directed.

Demolition and breaking up drain pipes ( Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 150mm bore. complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil. complete all as specified and directed.

Demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L for PCC (1:3:6) type C-2(using 40 mm graded crushed stone agg.) as in foundation filling & mass concrete, bed of manholes etc. complete all as specified and directed.

M&L for PCC (1:4:8) type C-2(using 40 mm graded crushed stone agg.) as in foundation filling & mass concrete, bed of manholes etc. complete all as specified and directed.

M&L for UPVC Sewage UDS (Under drainage system) pipes 100mm bore single socket, wall thickness not less than 4mm type SN-4 (IS-15328) complete all as specified and directed.

M&L for UPVC Sewage UDS (Under drainage system) pipes 160mm bore single socket, wall thickness not less than 4.5mm type SN-4 (IS-15328)complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) in concrete bed of drain pipes including haunching against the sides of pipes with concrete after they are laid and tested for 100 mm bore complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) in concrete bed of drain pipes including haunching against the sides of pipes with concrete after they are laid and tested for 150 mm bore complete all as specified and directed.

M &L for Fly ash brick work with old size bricks having crushing strength not less than 75Kg/Sqm,straight or curved on plan exceeding 6 meter radius , built in cement mortar (1:4) complete all as specified.

M&L for rendering 10 mm thick on fair faces of brick masonary or concrete surfaces (internal) in CM 1:3 finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of block masonary or concrete surfaces (external) in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) coping of masonary wall including weathering slightly rounded or chamfered angles & throating complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) for broken glass coping on top of walls in CM 1:3 including weathering slightly rounded or chamfered angles & throating complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel, drains, benching, and PCC bend for top of manhole brick work etc with slightly chamfered or rounded angles including necessary form works,if any,and finishing exposed surface even and smooth without using extra cement etc complete all as specified and directed.

Demolition of unreinforced cement concrete of any description & in any position all as specified and directed. complete all as specified and directed

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in landing, cover slab (for manholes), shelves & similar articles with plan faces & set in CM 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description & in any position all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel round bars as in handles and runners, clamps and similar small articles complete all as specified and directed.

M&L for mild steel angle section fixed independently w/o connecting plates as in swan neck fencing of Fe 410-w(gde E- 250S) complete all as specified and directed.

M&L for Framed wk such as grills, grating with ends of bars shouldered etc and similar work confirming to Fe-410-0 complete all as specified and directed.

Removing of material exc. 250m but n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete with fittings/fixtures such as switches, sockets, ceiling roses, lamp holders, fan regulators, bells, light fittings etc and making good disturbed surfaces of walls, floors to match with existing specifications and removing UNSV items from site, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

Description all as per srl item No. 119.00 here-in-before but for one light point controlled by two way switches, etc complete all as specified and directed.

Description all as per srl item No. 119.00 here-in-before but for 5 pin 5 amp socket outlet point on same board controlled by one switch 5 Amps one way, etc complete all as specified and directed.

M&L for point wiring for but for one 5 pin 6 Amps socket point controlled by one switch 6amps outlet on independent board with PVC insulated fire retardant low smoke multistranded copper conductor cable using 2.5 Sqmm in and including PVC concealed non metallic conduit (ISI marked) medium grade not less than 20mm dia with all accessories and including pressed steel sunken terminal boxes(for mounting switches/socket etc.) made of not less than 16 gauge MS sheet vand 6cm dept covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 2.5 sqmm PVC insulated fire retardant low smoke stranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall mouunting good the disturbed surfaces to match with the existing specification complete all as specified and directed (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase,Black for neutral green for earth wire). Note : In ceiling portion surface conduit wiring shall be carried out.

Description all as per srl item No. 122.00 here-in-before but with 4 sqmm FRLS cable PVC insulated unsheathed multistrand for 2 in 1 15/16 amp multipurpose socket outlet/plug top including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete all as specified and directed .

S&F Switch piano flush button, single pole, one way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, two way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Socket outlet, 6 Pin, 5 and 15 Amps, multipurpose, 2 in 1, flush type, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 Amps flush type, complete all as specified and directed.

S&F Bell push switch piano flush button, single pole, one way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F bell electric, heavy duty, Ding Dong type, 230 Volts AC, single pole, complete all as specified and directed.

S&F of lamp holder insulated body with back plate for batten fittings with polycarbonate body with and including 9 watt LED lamp retrofit type, complete all as specified and directed.

S&F of ceiling rose, surface bakelite, 2 to 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 240 Volts and connecting electrically, complete all as specified and directed.

S&F "in replacement" sheet metal enclosure MCB distribution board, double door, single pole & neutral 240volts 08 way with IP-54 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F "in replacement" of 240 volts 10KA 'B' curve miniature circut breaker (MCB) of single poles, current carrying capacity 5 to 32 Amp in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

S&F "in replacement" of 240 volts 10KA 'C' curve miniature circuit breaker (MCB) of single poles,neutral current carrying capacity 40 to 63 Amp in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

M&L for submain wiring with two single core FRLS PVC insulated cable 2x6 sqmm (nominal dia) copper conductor (multistrand) and drawing in and including PVC concealed conduit pipe, ISI marked including 1x6 sqmm multistranded copper conductor FRLS PVC green insulated unsheathed cable for earth continuity, including taking down existing submain wiring complete all as specified and directed. Note : Three runs of wire shall be measured as one unit.

S&F of surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 20 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F of wall mounted decorative bracket light with injection moulded ABS body and unbreakable ribbed transluscent globe 15Watt including prefixed LED lamp of 15 Watt complete all as specified and directed.

S&F of 1x10 Watt LED light fittings mirror type with high out put diffuser (2 feet long), prewired, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, enviornmental friendly, energy saving efficient ready to use pack 10 Watt LED 6500 K and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed.

S&F of surface mounted LED Bulk Head luminaires 10 watts with ABS body & polycarbonate diffuser available in CCT 6000K IP 54 complete all as specified and directed.

S&F in replacement for building security light fittings with LED light fitting 25 Watts, IP 65, having pressure die cast alumn alloy housing, prismatic polycarbonate cover complete and making connection with 3 core copper flexible cable of size 23/.0076 including galvanised iron bracket 0.90 mtr long of 40mm dia alongwith Clamps/nut bolts & washer complete and fixing with bldg for fixing of street light fitting complete all as specified and directed.

Note for srl item No 137 to 141 1. Driver shall be potted anti-vibration types. 2. LM-79 and LM-80 test report with 1 Lakh burning hours LED life from NABL lab shall be provided. 3. CRI (Colour Rendering Index) of fixture shall be > 70. 4. CCT (Colour Co-related Temperature of fixture shall be 5700K + 300 K. 5. System Lumen Efficacy shall be > 100 Lm/W. 6. 10 KV separate Surge Protection shall be provided as a part of fitting. 7. 2 years guarantee shall be provided by contractor supported by OEM covering all parts of luminaire. 8. Lenses shall be Modular Type. 9. PCB used shall be MC PCB type. 10. The defect liability period of LED light shall be 05 years from the certified date of completion & the contractor shall replace/repair the defective fitting within 07 days after handing over to contractor for replacement/repair. 11. CA No. shall be written on each fitting before installation. 12. The name of manufacturer to be embossed on the fitting. 13. The fittings shall have arrangement so that maintenance required, if any can be carried out from Top cover.

S&F "in replacement" of sheet metal enclosure vertical type (VTPN) distribution board, double door, tripple pole & neutral 415 volts 4 way degree of protection IP-65 DBs TPN suitable for MCCB as incommer and as outgoing MCB, 415 volts including MCCB 415 V 63 Amp 16 KA as incomer and 16 Nos MCB SP of Capacity upto 63 Amp as a outgoing complete with appropriate size bus bar and neutral link, fixed flush in wall including cutting chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

M&L in replacement of earthing complete with galvanised GI earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means bolt, nuts, check nuts and washer made of galvanised iron or steel including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 03 of SSR Part-I 2009 including 20mm bore GI watering pipe 'medium grade' with funel and wire mesh and 15mm bore GI protection pipe 'light grade' from earth pit to main board including PCC pit in cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) and including angle iron frame of size 40x40x3mm with hold fast embeded in PCC, RCC pit cover with suitable handle and earth work and removal of surplus soil to a distance not exc 50 Mtr, complete all as specified and directed.

Supply and laying in trenches or fixed to wall/pole or passing through ducts or pipe, cable LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty electric cable , with aluminium conductor of size 25 Sqmm x 3.5 core including taking down existing UNSV cable complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

M&L for dry clean fine river sand as in sand cushioning to underground cable 8cm below and 15cm above the cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L in replacement for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

S&F in replacement of GI tubing light grade 40 mm bore cut to size and fixed along the pole for cable protection including clamp 02 Nos of size 25x4 mm, nut bolts , washers etc all as required at site including taking out old one complete all as specified and directed.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make of fan with super enameled heat resistant copper winding wire of existing gauge & nos of turns including, sleeve work, varnishing with E class insulation, greasing, threading, connection with flexible copper wire of suitable size upto connector block and re-assembling and testing for 4 Hrs after repair complete all as specified and directed. (Repairs will be measured and paid for separately under respective items):- Notes :- (i) Fan shall be collected by the contractor from MES store yard at thier own arrangement. (ii) Motor shall be wound with machine only and repair of fan inside complex / office of GE (S) Mamun. (iii) Khaitan/RPG/KEI or equivallent make super enameled copper winding wire shall only be used. (iv) Rates are deems to be included cost of repair /servicing & replacement of minor spare part i.e. blade screws, capacitors clumps terminal connection , split pin spring washer etc.

Replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed.

Replacement of old unserviceable capacitor AC 415 volts 2.5 mfd oil filed ISI marked complete all as specified and directed.

Replacement of old unserviceable ball bearing of suitable size as per existing make and size of ceiling fan complete all as specified and directed.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site , dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, cup of both side and refixing to the existing site after servicing complete all as specified and directed. (Unserviceable parts if any will be measured and paid seperately).

Replacement of old unserviceable fan blades as per existing shape, colour and design suitable for 1200mm sweep ceiling fan of any make complete all as specified and directed.

Servicing of exhuast fans of capacity up to 450 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of outer gasket and nut & Bolts incl cleaning of outer part & fixing wall and refixing to the existing site after servicing complete all as specified and directed. (Unserviceable parts if any shall be measured seperately).

Dismantling and Re-winding of exhaust fan/industrial wall mounting fan/pedstral fan motor 250-380mm sweep any make of fan with super enameled heat resistant copper winding wire 31 SWG to 34 SWG including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation greasing, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as specified and directed. Notes:- (i) Exhaust Fan/pedestal fan shall be collected by the contractor from MES store yard at thier own arrangement. (ii) Motor shall be wound with machine only. (iii) Khaitan/RPG/KEI /RR or equivallent make super enameled copper winding wire shall only be used. (iv) Exhaust fan are deems to be included cost of repair /servicing & replacement of minor spare part i.e. body screws, capacitors clumps , clips etc.

Removing old paint by scraping with sand paper including washing and filling cavaties with filter and applying two coats of painting to ceiling fan 1200-1400mm sweep at workshop with heat resistant synthetic enamel paint by spray painting incl, writing MES No on the ceiling fans as directed. Note:- Paint qaulity and colour shall be get approved from GE.

Replacement of old unserviceable outer body of ceiling fan (bottom and uper cover plate incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed.

Replacement of existing unserviceable canopy top & bottom of ceiling fan as per existing size & shape complete all as specified and directed.

Replacement of existing unserviceable shutter and lover of exhaust fan as per existing size & shape complete all as specified and directed.

Replacement of existing unserviceable MS fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

M&L for lathe work incl re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed.

S&F in replacement of existing unserviceable Electric meter box with meter box enclosure polycarbonate body thermoplastic type IP-65 protection suitable to accommodate four nos electric meters having provisions of fixing of meters inside the enclosure complete all as specified and directed. Notes:- (i) The meter should be flush fixed and making good the disturbed surface matching with existing specifications shall be part of the job at no extra cost. (ii) Meter box should have individual transparent veiwing window for checking the serviceability of the meters.

S&F in repair of Electric meter after changing of UNSV spare parts, wiring along with sealing of meter complete all as specified and directed. Notes:- (i) Spare part items to be included in qoated rate. (ii) Contractor will provide the written warranty for one year.

M/S HIMANSHU BUILDERS

dadwal engineers

M. C. ENTERPRISES

Bidder Name

dadwal engineers

RD Engineers

M/S HIMANSHU BUILDERS

M. C. ENTERPRISES