Day to day repairing and maintenance of electrical installations, including 2x1250 KVA Substation along with DG set operation for a period of 01 year in Medical College block of PMPMCH, Talcher.

Amount

Attending electrical breakdown & day to day maintenance of electrical installations, including 2x1250 KVA Substation along wtih DG set operation in Medical College block of PMPMCH, Talcher for 24 hours everyday, such as any power supply complaints, general complaints, preventive maintenance of feeder pillars, street lighting, distribution board etc, specific problems of the light fitting, ceiling fans & bulb fitting etc, 2x1250 KVA sub-station, pump house (motor & starter maintenance) and LT panels, switching “ON” & OFF” of sub-station switches during breakdown & switching ON/OFF of street lights, attending breakdown of cable fault of all natures, temporary connection & disconnection etc as required with engagement of manpower throughout the year (365days) for a period of 1 year is as follows:

3 nos Skilled electricians wireman having valid electrical licence issued by Electrical license board of any state/UT (In 1st shift, 2nd shift and night shift for Substation operation)

3 nos Skilled electricians wireman having valid electrical licence issued by Electrical license board of any state/UT (In 1st shift, 2nd shift and night shift/general shift for maintenance works)

3 nos Semi-Skilled Helper (In 1st shift, 2nd shift and night shift/general shift for maintenance works.)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 X 1.5 sq. mm

3 X 2.5 sq. mm

3 X 4 sq mm

3 X 6 sq. mm

Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, ISI Marked, With 1 year warranty from date of installation.

Supply of 250mm sweep Exhaust Fan, Plastic, 30-35W, 1300 RPM retrofitted to existing cut out/frame, With 1 year warranty from date of installation.

Stepped type Modular Fan regulator (2 module)

Rewinding of ceiling Fan & Exhaust Fan

Providing of fan capacitor, 2.5 mfd, 230 V

Providing of Bearing 6201-ZZ

Providing of Bearing 6201-ZZ

Providing of 1 feet X 1 feet Square ceiling light, 22-24 W with 01 year warranty

Providing of night lamp LED/0.5 W (White/Yellow/Red)

Providing of 9-10 Watt LED Tube Light 2 feet

Providing of 18-22 Watt LED Tube Light 4 feet

Providing of 9-10 watt LED B22 bulb with 2 year warranty.

Providing of 18 watt LED B22 bulb with 2 year warranty.

Providing of 90 watt LED street light fitting with 2 year warranty.

Providing of S.P. 5/6 amps, one way modular switch, ISI marked, Retrofitted to modular frame of ABB make, Model -Snieo

Providing of S.P. 5/6 amps, two way modular switch, ISI marked, Retrofitted to modular frame of ABB make, Model -Snieo.

Providing of S.P. 15/16 amps, one way modular switch, ISI marked, Retrofitted to modular frame of ABB make, Model -Snieo

Providing of 3 pin 5/6 amps modular socket outlet, ISI marked, Retrofitted to modular frame of ABB make, Model -Snieo

Providing of 6 pin 15/16 amps modular socket outlet, ISI marked, Retrofitted to modular frame of ABB make, Model -Snieo

Providing modular base & cover plate for 2 module, Retrofitted to existing box of ABB make, Model -Snieo.

Providing modular base & cover plate for 3 module, Retrofitted to existing box of ABB make, Model -Snieo

Providing modular base & cover plate for 4 module, Retrofitted to existing box of ABB make, Model -Snieo

Providing modular base & cover plate for 8 module, Retrofitted to existing box of ABB make, Model -Snieo

Providing of Brass Batten/angle holder, 6 amp, 230 V

Providing of ceiling Rose, 3 pin, 5 amps ISI marked

Providing of MCB 6 amp, ratings, SP MCB, “C” curve, 10 KA breaking capacity

Providing of MCB 10 amp, ratings, SP MCB, “C” curve, 10 KA breaking capacity

Providing of MCB 16 amp, ratings, SP MCB, “C” curve, 10 KA breaking capacity

Providing of MCB 25 amp, ratings, SP MCB, “C” curve, 10 KA breaking capacity

Providing of MCB 32 amp, ratings, SP MCB, “C” curve, 10 KA breaking capacity

Providing of 25 amps. ratings, DP MCB, “C” curve, 10 KA breaking capacity

Providing of 32 amps. ratings, DP MCB, “C” curve, 10 KA breaking capacity

Providing of 40 amps, 2 pole isolator, 230 Volt

Providing of 63 amps, 2 pole isolator, 230 Volt

Providing of 40 amps, 4 pole isolator, 415 Volt

Providing of 63 amps, 4 pole isolator, 415 Volt

Providing of 40 amps. rating, 2 pole RCCB, 30 mA

Providing of 63 amps. rating, 4 pole RCCB, 30 mA

Providing of 4 pole MCCB, 125 A, 36KA, retrofitted in existing panel with suitable spreader link as required.

Providing of 4 pole MCCB, 200 A, 36KA, retrofitted in existing panel with suitable spreader link as required.

Providing of 4 pole MCCB, 250A, 36KA, retrofitted in existing panel with suitable spreader link as required.

Providing of 4 pole MCCB, 400A, 50KA, retrofitted in existing panel with suitable spreader link as required.

Supply and installation of rotary handle operating mechanism standard adjustable depth L=500 mm with padlock device and door interlock for MCCB fixed/withdrawable T7, Compatible with "Space Tmax" model of make-ABB.

Supplying, installing on wall, testing and commissioning of following capacity rising mains made of 1.6mm thick IF 42 sheet steel enclosure duly painted with powder coating, wall straps, fully PVC insulated 4 Nos aluminium bus bars having current density of 130 Al sq cm at nominal current rating in convenient sections and suitable for 415 V, 3 phase, 4 wire, 50 Hz, A.C. supply with extension joints, fire proof barriers, expansion joints, thrust pads including jointing and earthing with 2 runs of galvanised iron strips etc. as required. (Rising mains confirming to IS 8623, TEC 439)

200 A (S.C. rating for 1 sec- 15 kA)

300 A (S.C. rating for 1 sec - 20 kA)

400 A (S.C. rating for 1 sec - 25 kA)

Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ ACB) complete etc. as required.

125 A, lsc= 15kA for 1 sec

200A, Isc= 25kA for 1 sec

250 A, lsc= 30kA for 1 sec

400A, lsc= 35kA for 1 sec

Providing of Aluminium lugs for 16 sq mm cable

Providing of Aluminium lugs for 25 sq mm cable

Providing of Aluminium lugs for 50 sq mm cable

Providing of Aluminium lugs for 70 sq mm cable

Providing of Aluminium lugs for 120 sq mm cable

Providing of Aluminium lugs for 150 sq. mm cable

Providing of Aluminium lugs for 185 sq mm cable

Providing of Aluminium lugs for 240 sq. mm cable

Providing of Aluminium lugs for 300 sq mm cable

Providing of Aluminium lugs for 400 sq mm cable

Providing PVC insulated adhesive tape 3/4", 10 mtrs long, ISI Marked

Providing of compound Tape

Providing of Ampere Tape

Providing of HT tape

Providing of CRC Cleaner (300 ml tube)

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

R K ENGINEERING (BID ID -1137963)

TARENI ELECTRICALS (BID ID -1137715)