ALTERATION AND SPL REPAIRS TO CERTAIN BLDGS IN GOLE KA MANDIR UNDER GE GWALIOR

Taking down chowkhat or frame (without taking off shutter from the frame) size not exceeding 1.5 Square metre each, complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) size exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S &F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.

M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat pink primer on new surface of wood and wood based material any description and in any position over 10 cm width or girth complete all as specified and directed.

S&F in renewal for floor door stopper of brass body and tongue, overall length of cover plate of size 150 mm , anodized, with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

S&F for aluminium butt hinges of 100mm size complete all as specified and as directed.

S&F for Mild Steel Butt hinges , medium weight, cold rolled , of size 100 mm complete all as specified and as directed.

S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and as directed..

S&F for Aluminium anodised sliding door bolts 300mm long, plate type, complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 200 mm size of extruded section complete all as specified and as directed.

S&F pressed steel frame of size 125mmx60mm for doors with one or more rebates including necessary lock strike plate,etc as per IS requirement complete all as specified and directed

S&F pressed steel frame of size 105mmx60mm for doors with one or more rebates including necessary lock strike plate,etc as per IS requirement complete all as specified and directed

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

S&F Anodised Aluminium grill (anodised transparent ordyed to required shade according to : 1868 with minimum anodic coating of grade AC 15) of approved design/patterm, with approved standardsection and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opning size for fixing and operation of handles and fixing opproved anodised aluminium standard section around the opening complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over existing shop coat of primer/ Red oxide complete all as specified and directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and as directed.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified and as directed.

S&F for 12 mm thick Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive to make kitchen cabinet partion ,shelves ,shutter, drawer and shall be provided 3 edges in size 18 mm x 18 mm x 1 mm thick complete all as specified and as directed.

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size fixed with screw complete all as specified and as directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.

S&F for MS 300 mm ordinary rat tail springs plate type incl.rollar plate etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for jont free non skid ceramic Coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 16 mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 20mm thick screed bed or backing coat in cement mortar (1:6) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) 40 mm Thick average as in roof padding finish even and smooth etc complete all as specified & directed

M&L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and directed. Notes:- (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. (d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

M&L providing and laying at near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand ), including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation for new cement concrete, brick curve stone, asbestos cement for surfaces and applying two coats of synthetic enamel paint any description or one coat of priming paint plaster coats plain or moulded, over 10 cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected

M&L for 25mm thick PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) as levelling course/mass concrete complete all as specified and as diected

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as diected

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces on wall finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces on wall finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of wall & applying two coats of cement base paint over one coat of exterior weather proof wall care putty on wall surfaces complete all as specified and directed.

M & L for two coats of oil bound emulsion paint over a coat of 2mm thick Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats cement base paint including over exterior weather proof wall care putty complete all as specified and directed.

Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats of white wash complete all as specified and as diected

Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats of oil emulsion over a coat of wall care putty complete all as specified and as diected

M&L Plain cement concrete (1:5:10) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and as diected.

M&L for Two or more coats of Epoxy (hardener and raisner ) Coating over primer over new prepared wall/ floor surfaces complte as in sunken portion complete all as all as specified and as diected.

Supply only Liquid water proofing compound complete all as specified and as diected

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as diected

S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as diected.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as diected

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as diected

S&F for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.

S&F for 75 mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.

S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as complete all as specified and as diected

S &F for PVC (SWR) vent cowl, 110 mm bore pipe complete all as specified and directed.

M&L in renewal for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement complete all as specified and directed.

S&F in renewal bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32 mm -260gms ) complete all as specified and directed.

S&F in renewal 32mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as diected

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed.

Supply and laying 32 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, two layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for in renewal gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F for in renewal Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F for in renewal CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F for peg set of six Aluminium. fixed to wall with PVC plugs and screw, complete all as specified and directed.

S&F for in renewal 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and as diected

S&F for in renewal for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and as diected

S&F in renewal for wall mixer with Three in one pattern in of brass CP, complete all as specified and directed.

S&F for in renewal Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and as diected

S&F single level Sink Mixer with Swinging Spout on Uper Side (wall Mounted Model) with connecting Legs & Wall Flangers for 15mm bore iron pipe complete all as specified and as diected

S&F in renewal for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

S&F for in renewal of vitreous china wash basin, white, flat back of size 550 x 400mm including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection included but supply & fixing of same will be measured paid separetly.

S&F for in renewal PVC waste pipe flexible type 32mm bore, complete all as specified and directed.

S&F for in renewal waste coupling fittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified and as diected.

S&F for in renewal waste coupling fittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 40 mm dia bore complete all as specified and as diected

S&F for in renewal mild steel Chromium plated grating 100 mm dia, fixed to Nahani traps, complete all as specified and directed.

S&F in renewal sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall of size 915 mm x 460 mm with bowl of size 410 mm x 330 mm x 160 mm complete all as specified and directed .

S & F for plate rack made out of 0.90 mm thick stainless steel of wire type / sheet pattern size nad type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

M&L for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed and making good to floor, complete all as specified and directed.

S&F for in renewal PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F for in renewal Curtain rod stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and directed.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6). complete all as specified and as directed.

M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (nominal mix) (using 20mm graded stone aggregate) as in shelves, etc complete all as specified and directed.

S&F TMT bars 10 mm dia over cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S. complete all as specified and as diected

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5 m above the starting point with soil complete all as specified and as diected

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed.

Taking down unserviceable TPN/VTPN DB with MCB's of any make/capacity, complete all as specified and directed.

M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and as directed.

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

One Bell point controlled by one way 5 Amp push button switch.

For one light point controlled by 2- two way switch

Description all as per item No 118 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. ONLY for power point complete all as specified and as directed.

S&F Modular switch 1 way 6 A,1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F modular bell push flush type, 5 Amps complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F modular electronic step rotary type fan regulator of two module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F LED Lamp 09/10 watt with 5 star rating complete all as specified and directed.

S&F LED Mirror tube light fitting 09/10 watt ,4000k to 6500k complete all as specified and as directed.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500k as per required fitting , incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed.

S & F decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDs IP 66 protection LED of 10 watt including reqd length of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete all as specified and as directed including self closing locking arrangement and comprising for following fittings (i) MCCB 4 pole, 100 Amps - 01 No (For incoming) (ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts ) - 01 No (iv) Indicator Lamp set of three R,Y,B - 01 Set (v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SPN 63 Amps - 05 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator (viii) Supply and fix single phase energy meter as space in distribution box- 04 Nos Note;- (i) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (ii) All internal wiring inside the panel used for metring purpose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5 Sqmm.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 6 to 32 amp 240 volts, 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and as directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and as directed.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and as directed.

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm complete all as specified and as directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe complete all as specified and as directed.

M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe complete all as specified and as directed.

S&F in renewal 25 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts complete all as specified and as directed.

S&F in renewal 20 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts complete all as specified and directed.

Supply and fix electric water heater, storage type glass lined enamel tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion complete all as specified and as directed.

Supply and fix exhaust fan(Fresh Air Fan) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 sqmm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II.

S&F for modular decorative plate and provising of new modular plate of different size including fixing ,the existing modular switchs , modular socket ,modular regulator and refixing them in new board complete all as specified and as directed.

White cover plate with frame but 2/3/4 module

White cover plate with frame but 6/8/12 module