Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 CrAccepted-AOC ONLOOKER BUILDING 3RD FLOOR 25 SHRI P M ROAD FORT MUMBAI 400 001 | MUMBAI | MAHARASHTRA | 400001 | ₹7.1 Cr | L1 | Accepted-AOC Being the lowest tenderer (L1) and reasonable tender |
| 2 | L2₹7.9 Cr+₹80.0 L (11.2%)Rejected-Finance | ₹7.9 Cr+₹80.0 L (11.2%) | L2 | Rejected-Finance Not Being the lowest |
| 3 | L3₹8.8 Cr+₹1.7 Cr (24.0%)Rejected-Finance K 99 LGF KALKAJI NEW DELHI 110 019 | NEW DELHI | NEW DELHI | DELHI | 110019 | ₹8.8 Cr+₹1.7 Cr (24.0%) | L3 | Rejected-Finance Not Being the lowest |
| 4 | L4₹9.4 Cr+₹2.3 Cr (31.8%)Rejected-Finance | ₹9.4 Cr+₹2.3 Cr (31.8%) | L4 | Rejected-Finance Not Being the lowest |
| 5 | L5₹10.9 Cr+₹3.8 Cr (52.6%)Rejected-Finance NOT SPECIFIED | ₹10.9 Cr+₹3.8 Cr (52.6%) | L5 | Rejected-Finance Not Being the lowest |
Tender Value
Refer Docs
EMD Value
₹7.3 L
Closing Date
9 Apr 2021, 6:00 pmClosed
Chief Engineer (Navy) Mumbai
HQCE(Navy) Mumbai 26 Assaye Building Colaba Mumbai 40005
COMPLETION OF INCOMPLETE WORKS FOR PROVISION OF DEFICIENT CLASSROOMS NCS NAVY NAGAR COLABA MUMBAI
2021_MES_427784_1
87823/E8
Open Tender
Civil Works
Lump-sum
400 days
Garrison Engineer (P) NW Mumbai
Please refer Tender Documents
7 documents required · 7 mandatory
₹3,000
GE(P) NW Mumbai
₹7.3 L
Yes
20 Apr 2021
4 Mar 2021
12 Apr 2021
4 Mar 2021
9 Apr 2021
2 Apr 2021
6 Mar 2021 - 20 Mar 2021
Amount
Schedule-A' Part-I 'Buildings & Structures' Total of Schedule-'A' Part-I B/F from serial page No. 19
Schedule-A' Part-II 'Site Clearance, excavation and earthwork, ' Total of Schedule-'A' Part-II B/F from serial page No. 20
Schedule-A' Part-III 'Internal Electrification' Total of Schedule-'A' Part-III B/F from serial page No. 24
Schedule-A' Part-IV 'Internal Water Supply' Total of Schedule-'A' Part-IV B/F from serial page No. 26
Schedule-A' Part-V 'External Electrification' Total of Schedule-'A' Part-V B/F from serial page No.27
Schedule-A' Part-VI 'External Water Supply' Total of Schedule-'A' Part-VI B/F from serial page No. 29
Schedule-A' Part-VII 'Sewage Disposal' Total of Schedule-'A' Part-VII B/F from serial page No. 31
Schedule-A' Part-VIII 'Area Drainage' Total of Schedule-'A' Part-VIII B/F from serial page No. 32
Schedule-A' Part-IX 'Roads & Hard Standing' Total of Schedule-'A' Part-IX B/F from serial page No. 33
Schedule-A' Part-X 'Fire Fighting' Total of Schedule-'A' Part-X B/F from serial page No. 35
Schedule-A' Part-XI 'Lightning Protection' Total of Schedule-'A' Part-XI B/F from serial page No.36
Schedule-A' Part-XII 'Water Cooler' Total of Schedule-'A' Part-XII B/F from serial page No. 37
Part-XIII (Miscellaneous Items)
Internal Electrification
S&F Factory made sheet metal enclosure MCB DB SPN 230 Volts, 2 way complete with neutral link with MCB SPN 6Amps, 10 KA 'C' series -1No complete. (for Bldg security light control)
S&F MCB DB SPN 6 way, having degree of protection as IP 43-IK 09 with metal door (double door), 240Volts, complete with 200Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 6 all as specified and directed
S&F MCB DB SPN 8 way, having degree of protection as per IP 43-IK 09 with metal door (double door), 240Volts, complete with 200Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 8 all as specified and directed
S&F MCB DB SPN 12 way, having degree of protection as per IP 43-IK 09 with metal door (double door), 240Volts, complete with 200Amps rated copper bus bar and neutral link with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 12 all as specified and directed
S&F MCB DB TPN 4 way, having degree of protection as IP 43-IK09 with metal door (double door) 415Volts vertical type complete with 200Amps rated copper bus bar with neutral link with provision for FP MCCB as incomer and SP MCBs as outgoing and total number of modules equal to module for MCCB+12 all as directed
Note for Item No. 15.02 to 15.05: MCCB's/MCB's/RCBO for DBs shall be measured and paid separately
S&F MCB TPN 25Amps 415Volt, 10kA, 'C' series
S&F MCB TP 25Amps 415Volt, 10kA, 'C' series
S&F MCB SPN 10 to 32Amps 240Volt, 10kA, 'C' series
S&F single pole 6 Amp to 32Amps, 240Volt, 10kA, 'C' series
Supply and fixed Blanking plate in DB
Supply, Installation,Testing & Commissioning of street light luminaire suitable for 70watt HPSV lamp, IP65 enclosure complete with control gear, lamp, ignitor, capacitor, holder, connector, etc. fixed on wall with bracket arm made out of GI medium grade tube of 40mm dia,1.5m long bend to shape 1200 and 2Nos of FI clamp 25x4mm required size with one coat of red oxide & two coat of silver metallic paint all as per Bajaj Model No. BGEST 0270 SV IP 65 FFGF with 70W HPSV lamp-01No. complete
M&L for earthing using GI Wire 4mm dia as earthing wire complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to galvanised iron as earthing lead GI wire 4mm dia by means of bolts, nuts,check nuts and washers complete all as shown in electrical plate no 3 and connected to earthing test point including excavation, earthwork, PCC pit, RCC covers, funnel with watering pipe,GI protection pipe,wire mesh and testing on completion all as specified and as directed (for MDBs)
S&F fibre glass enclosure for electronic energy meter (conforming to IS-13410) complete with locking arrangement of size not less than 400X300X200mm
S&F three phase 4 wire electronic energy meter, direct operation without CT, ISI marked as per IS-13779/1999 of rated current capacity of 20-80 Amp with rated voltage 415Volts, accuracy class 1.0 with power consumption less than 8VA, with overload capacity of six times the basic current, immune to various disturbances with digital LCD display of (instantenous active energy KWH, power and different tamper indicator, date and time display) with last six month MD storage alongwith communication port complete all as specified
Supply and fix time switch 240volts single phase of 16Amps rating complete with double pole contactor of 16Amps, 240Volts capacity fixed inside the factory made 2mm thick sheet steel enclosure including painting and fixing arrangement all as directed (for Bldg security light)
S&F exhaust fan of size 300mm sweep complete set with PVC body and louvers connecting up including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan
External Electrification
Supplying, installing, testing and commissioning of LT panel board CPRI approved cubicle, indoor type, IP 52, floor mounted made with 2mm thick powder coated CRCA sheet with copper bus bar of suitable size and capacity of 300A for phase and neutral mounted on insulator housed in separate bus bar chamber covered with heat shrinkable sleeve with necessry bus bar tappings, copper control wiring of suitable size, connecting the cable with necessry cable glands and cable alley, lugs, etc. proper arrangements for ventilation and copper strips for MCCB's complete and comprising of the following: (a) MCCB, 4 pole, 250Amp with ultimate breaking capacty Icu-36kA at 415Volts and microprocessor release conforming to IEC 60947 Part-I/IS-13947-Part-I with breaking capacity Ics=Icu at 415 Volts of 16kA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times - 01No (as incomer)
M&L for earthing of machinary installed at substation using GI strip as earthing lead complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground, earth pit not les than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to galvanised iron as earthing lead strip 32x6mm by means of bolts, nuts,check nuts and washers complete all as shown in electrical plate no 3 and connected to earthing test point including excavation, earthwork, PCC pit, CI covers, funnel with watering pipe, wire mesh and testing on completion all as specified and as directed
Supply and fix MCCB, 4 pole, 250Amp with ultimate breaking capacity ICU-36kA at 415Volts and thermal magnetic release conforming to IEC 60947 Part-I/IS-13947-Part-I with breaking capacity Ics=Icu at 415 Volts of 16kA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times - 01No fixed in existing LT Panel board insert in the suitable enclosure made out of 2mm thick CRCA sheet duly power coated with provision of necessary copper strip for incoming from bus bar all as directed
Boring of holes under road pavement hard standing by trenches, technology using ultra sound technique and necessary machines using for laying HDPE pipe of 150mm dia all as directed
External Water Supply
Supply installation and testing of CI Sluice valve 80mm dia flanged end class- I, PN 1.0 as per IS-14846 heavy duty with stainless steel spindle and iron wheel at the top flanged end including two no of flange joint including jointing materials ie bolts and nuts all as directed
Material and Labour for construction of valve chambers size 900x900x900mm depth with PCC foundation in the ratio 1:4:8 brick work cement motor in the ratio 1:4 using sub-class B bricks, PCC1:2:4, type B1, using 20mm graded stone aggregate as in coping including necessary form work, plastering 15mm thick in the ratio 1:4 including MS sheet cover 3mm thick with angle iron frame 25x25x4mm, locking arrangement complete with painting on steel surfaces with one coat of red oxide primer & two coats of synthetic enamalled paint all as specified and and directed including excavation & earthwork in any type of soil, returning, filling and removing the surplus soil to a distance of 50m complete
Fire Fighting
S&F fire extinguisher dry chemical powder (ABC) type, 5kg capacity (IS:2171/13849,14609) ISI marked
S&F fire extinguisher ISI marked CO2 5kg capacity (IS:2878)
Supply and fix branch pipe and nozzle for 20mm dia hose reel conforming to IS 8090
Supply, installation of Fireman Axe as per IS:926 all as specified
Supply, installation of Ceiling Hook as per IS:927 all as specified
Material and labour for construction of valve chambers size 900 x 900 x 900mm depth with PCC foundation in the ratio 1:4:8 brick work cement motor in the ratio 1:4 using sub class B bricks, PCC1:2:4, type B1, using 20mm graded stone aggregate as in coping including necessary form work, plastering 15mm thick in the ratio 1:4 including MS sheet cover 3mm thick with angle iron frame 25x25x4mm, locking arrangement complete with painting on steel surfaces with one coat of red oxide primer & two coats of synthetic enamalled paint all as specified and and directed. Including excavation & earth work in any type of soil, returning, filling and removing the surplus soil to a distance of 50m complete
Supplying, installing, testing, perfect aligning and proper leveling and commissioning of terrace pump of 900LPM and pressure of 3.0kgcm2 at 30m head of 2900RPM CI casing single stage (mono block) with bronze impeller, bronze working parts, EN-8 shaft (C-40) and directly coupled to suitable capacity motor, ‘B’ class insulation squirrel cage induction motor working on 3ph 415AC both pump & motor are to be mounted on common base plate along with suitable rigid foundation, nut bolts, with coupling guards & antivibration rubber pads in an approved manner in and including suction pipe of suitable size and length all as directed
Outgoing (i) 3 Pole MCCB 25A 16kA -2Nos (ii) Starter suitable for terrace pumping set at item No. 18.07 including over load and earth fault relays/protection-2 Nos (iii) Electronic single phase preventor for protection of each motor (iv) Phase indicating lamp LED type --set of three for each motor and incoming (v) Pressure sensing switch suitable for size for 80mm dia water mains complete with wiring from panel to switch and switch to pump starter including all accessories- 2Nos
S&F and jointing heavy grade GI pipe, class ‘C’, conforming to IS:1239 on wall/ floor including all fittings such as coupling, bends, elbow and tee etc. welded all as specified of 20mm dia
Lightning Protection
M&L for earthing with GI plate of size 600x600x6mm thick & electrode burried directly and vertically in ground with top edge not less than1.25m below GL connected with earthing lead of 32x6mm GI strip upto 7.50m in length all as specified in electric plate No. 3 of SSR 2009 Part-I to the earthing test points all as specified including CI cover 10 mm thick with angle iron of size 25x25x6mm frame, funnel with wire mess, watering arrangements with 20mm bore medium grade galvanised iron pipe, PCC chamber with Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate with form work and necessary earth work filling with charcoal and salt, in alternate layers and testing complete all as specified
Schedule-A' Part-XIII 'Schedule of Credit' total of Schedule-'A' Part-XIII B/F from serial page No. 38
NOTE:- (i) Contractor shall quote the percentage addition over lumpsum price of credit for material, sheds/store and T&P inserted by MES and carry forward the corresponding amount. However the quoted percentage shall not be less than NIL percent (i.e. shall not be on minus side). In case contractor’s quoted percentage is less than 0% (zero percent) it shall be restricted to 0% (zero percent) & total amount accordingly be corrected. The contractor shall take this aspect in account and nothing extra whatsoever shall be admissible on this account. (ii) This schedule of credit amount will be deducted from the contract sum to arrive quoted contract sum.
JAI CONSTRUCTION CO.
SOOD ASSOCIATES PVT LTD
MC Gandhi and Sons
United Sales Corporation
Mukund Enterprises Private Limited
Ms Hari Deva Builders
Hariom Projects Pvt Ltd
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .