Providing and fixing Overhead Cantilever and

Amount

Earth work in excavation by mechanical means in all types of soil (including rock) and getting out and disposal of excavated earth up to any lead and lift, as directed by Engineer -in-charge. (Based on HSR 4.12.1)

Providing and laying in position cement concrete 1:3:6 of specified grade with stone aggregate 20mm nominal size excluding the cost of centering and shuttering complete in all respect (HSR 6.1.4)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) sqm including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. (HSR 6.29.2)

Providing and laying in position cement concrete 1:1½:3 specified grade with stone aggregate 20mm nominal size excluding the cost of centering and shuttering (HSR 6.1.1)

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding , wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level. Note: - Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement (HSR 6.33.6)

Providing and fixing mild steel round holding down bolt and nuts and washer plate complete (HSR 13.31)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (HSR 13.30.1) Hot finished welded type tubes

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR 13.28)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.(HSR 11.78)

Sign Facia Design, manufacturing and assembly of retro reflective sign face (measured in Sq. or rectangular shape) made from micro prismatic Type XI sheeting as per ASTM D-4956-09 pasted on 4mm thick ACP/ ACM. The letters/ legends/ directions/ theme shall be cut out in overlaminate with durability of 10 years as per IRC 67-2012. The signage facia shall be warranted for 10 years as per IRC 67 and shall be supplied with government test report of 3 year outdoor weathering test conducted in India condition as per IRC 67-2012. (NS) (including fixing on the prepared metalic frame i.e. ploting, pasting, riveting, pacaging, handling, complete in all respect as per satisfaction of Engineer-in-Charge. Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

CBM Industrie Ltd