REPAIR REPLACEMENT OF DOORS WINDOWS JOINERY FENCING FOOTPATH AND BOUNDARY WALL OF OTM MD ACCN IN THE AOR OF AGE BR II UNDER GE NARANGI

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook bolts and washers, in roof covering, walls cladding etc, with grade of zinc coating 275 complete all as specified and as directed.

Refixing only galvanised corrugated mild steel sheeting as obtained from dismantling of old sheets here in before with two corrugation side lap, fixed with & including 'L' type or 'J' type or cranked hook bolts in roof covering, wall cladding etc., complete all as specified and as directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

Demolition of brick work ( laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc. ( each layer) laid , bedded and pointed in any mortar complete all as specified and as directed.

M&L Bricks sub class B of old size laid flat into sides of drain, bedded and jointed in cement mortar 1:6 and ppointed in cement mortar 1:3 complete all as specified and as directed.

All as per item No.9 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.

M&L Bricks sub class B of old size laid on edges of drain, bedded and jointed in cement mortar 1:6 and ppointed in cement mortar 1:3 complete all as specified and as directed.

All as per item No.11above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.

M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No.15 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each including builders hardware complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .

S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 18mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .

S&F factory made single extruded WPC( Wood Polymer Composite) solid door/window/Ceosetory windows and other frames/chowkats of size 50X100mm comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) febricated with miter joints after applying PVC solvent cement and screwed with fulll body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200N ( Face) and 1100N ( Edge) , minimum compressive strength of 58N/sqmm modules of elasticity 900N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with MS hold fast/lugs/SS desh fasteners of required dia and length. ( MS hold fast/Lugs or SS dash fastener shall be measured and paid seperately) Note : For WPC solid door/window frame plus minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.

S&F in repair 18/19mm thick block boards grade 2 quality interior grade commercial type fixed with screws to timber frame work as in cup boards and shelves complete all as specified and directed.

S&F steel window with side hung shutter glazed shutter ibncluding both side openable ( outsude glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.( Guard bar or square bar shall be measured and paid seperately).

S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .

S&F stainless steel butt hinges 100 mm long complete all as specified and as directed.

S&F stainless steel butt hinges 75 mm long complete all as specified and as directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, cast type, anodised complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 25mm dia harrison rails mild steel chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repair powder coated bracket for 25mm dia curtain rod omplete all as specified and as directed.

S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

S&F in repair stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Repair to aluminium doors as required including necessary hinges, cleats, screws, tightening of joints, aluminium beading, gasket/rubber seal, replacement of hinges with necessary repair/tightening of door chowkhat, handle etc complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVc frame including dismantling of panels at site complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling including fixing to wall of complete all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 (using20 mm graded stone aggregate) as in coping / benching etc. including weathering , slightly rounded or chamfered angles and necessary form work complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-1 as in slabs supported on walls , beams and columns in floors, roofs, landings, balconies, casnopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in surface channel and drain complete all as specified and as directed.

M & L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.

M&L in repair 300mm bore of pipe RCC class NP2 laid and jointed with collars complete all as specified and directed.

M/L PCC 1:3:6 type C-2 ( 40mm graded aggregate) as in concrete bed to drain pipe 300 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in floor finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in floor finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 150mm thick PCC 1:2:4, type B-2 (using 40mm graded stone aggregate) as in hardstanding complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M & L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

M&L for rendering 10mm thick bedding layer in cement mortar (1:4) on roof top, sunken floor surfaces in single layer mixed with WPC @ 2% by weight of cement for laying floor finish etc. complete all as specified and as directed. ( Note: WPC shall be measured and paid seperately under relevent item as Supply only).

M&L applying two coats @ 1.50Kg per square metre per coat minimum of two componenets of water proofing treatment on RCC roof/wall/sunken surfaces or plastered surfaces with Nito proof 100 as priming coat and Nito proof 120 or 100 as finishing coat of Forsoc or equivalent approved make

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .

M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .

M & L for preparing new surfaces of wood and wood based materials of any description exceeding 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.

Dismantling fencing wire mesh of any size and type complete all as specified and as directed.

Supply only chain link fencing wire mesh of size 75X75mm, made with 3.15 mm dia including 5mm dia line wire conforming to IS 2721 mild steel galvanised wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed

Dismantlingpost or strut ( wood, steel or RCC fencing posts) any section and taking out embedded portion ( post embeded in concrete) including making good disturbed surfaces complete all as specified and as directed.

S & F in repair galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to RCC / steel post etc. including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc. (each line of wire to be measured separately) complete all as specified and as directed.

S & F in repair providing and fixing 610mm dia Razor Concertina coil fencing with and including required clips, pins, etc. as per manufacturer's instruction and as per specification fixed on the Y angle. Each concertina coil shall be fixed to MS angle with existing rows of barbed wire on each of Y angle. There shalll be 80 ( eighty) circles in each 9.00 mtr length. Number of clips in each 9.00 mte shall be 200 Nos., central core wire 12 SWG hot galvanised high tensileed wire : UTS- 145-160 Kg/Sqmm. Razor strip 0.50mm thick hot dipped galvanised and of length 19mm, clips 1.5mm thick made of SSAISI 410 complete. ( Note: Measurment and payment shall be considered on length of security wall/ fencing and not actual length of concertina coil complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long and diameter of shank 11 to 15mm completed all as specified and as directed.

M&L 10mm dia mild steel round bar as in stiffener to chain link fencing including necessary cutting, bending etc complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.

Use and waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick ( Horizontal or sloping) complete all as specified and directed.

M&L heavy duty parking tiles of size 300mmX300mmX10 to 12mm thick/ 400mmX400mmX10 to 12 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of old slabs and tiles complete all as specified and as directed. complete all as specified & as directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) including demolition of old slabs and tiles complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with 30mm thick sand cushioning including filling the joints with sand including demolition of old slabs and tiles complete all as specified & as directed.

S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, PTMT bib taps 15mm dia standard any colour screwed doen for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs,grating doom 100m dia with waste hole of PTMT ( Minimum weight 25 gms) complete all as specified and as directed.

S&F in repairs,grating doom 125m dia with waste hole of PTMT ( Minimum weight 40 gms) complete all as specified and as directed.

S & F in repairs, waste coupling of PTMT 40mm (half or full thread) complete ( minimum weight -60gms) all as specified and as directed.

S & F in repairs, waste coupling of PTMT 32mm (half or full thread) complete ( minimum weight -45gms) all as specified and as directed.

S&F rolled mild steel framed works as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hangings also fastening and fixing etcconforming to Fe.290.Gde-E-165.

S&F Rolled mild steel joist, channel, angle or tee sections, fixed independently , with connecting plates etc. ( cut to ordinary lengths i.e within 20mm of the length indicated) as in fencing post, struts etc. bend to shape required, including drilling holes , notches cut out to receive MS bolts and barbed wire embedded to concrete including tarring to steel work in embedded portion complete all as specified & as directed.

S&F mild steel Hand rails , half round or other steel section or core for wooden hand rail straight portion , drilled and countersunk for balusters running bars , for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including seccuring bolts ,posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets ( for securing wire mesh etc.) including all neccessary drilling, bolting, or rivetting etc. and similar work conforming to FE-290 Gde E - 165 complete all as specified & as directed

M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

S&F in repair PVC waste pipe of size 40mm dia for sink complete all as specified and directed.

S&F in repair PVC waste pipe of size 32mm dia for wash hand basin complete all as specified and directed.

S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S&F in repair 40mm dia spout medium grade 40 cm long fixed in top of sunken slabs including cutting holes to wall and making good with CM 1:2 complete all as specified & as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs, chromium plated central hole basin mixer without popup waste system with 450mm long braided hoses for mixing hot and cold waterwater screwed down for iron pipe and fixed complete all as specified and as directed.

S&F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs, stainless steel kitchen rack made of 0.63mm thick stainless steel sheet of size,786mmX914mmX254mm fixed to wall with screws complete all as specified and as directed.

S&F in repair Cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed

S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S. R. TRADING

KAMAKHYA CONSTRUCTION & BUILDERS

M/S SEBANGSHISH TRADERS