Various Civil Allied Work, Renovation And Furnishing Work of Industrial Training Institute Tikamgarh District Tikamgarh (M.P.)

Amount

Providing and fixing for base frame work for partition /paneling on wall column or beam etc. by using teak, Sal wood,19 mm laminated board, frame work using two face finished 75mmx75mm section and 400 mm c/c grid work i/c extra member at skirting level frame shall be treated with 5.0% dilute anti termite emulsion sprayed with &the frame shall work shall be fixed to wall and finally cover with 12mm thick 100 % BWP ply wood all exposed surface cover with 1.00mm thick wooden laminated/PVC laminate (if req.) or instruction of architect, work complete all labor material wastage etc. scaffolding and as per instruction of architect/Eng. in charge. Plywood century, greenply, duro, archid or equivalent make

Providing and fixing of approved quality wallpaper with approved graphics and folder (as per architect) and pasted on the panels &partition on surface prepared with putty with required adhesive on the surface (the rate does not include surface preparation) basic rate of wall paper is RS 2000 to 2200 per sqm.The item in good condition nothing shall be paid extra separately unless specified

Providing and fixing in position imported pvc/tiles carpet of approved shade and brand 550 gsm pile wt, gross wt 1800 gms graphic loop pile having thickness 4 mm-9mm with primary backing of polypropylene woven sect and secondary action back complete as per instruction, specifications and as per the direction of eng in charge, carpet and underlay to be installed with standard fevicol/Dunlop adhesive. The flooring to be installed agency or as approved with eighteen month warranty from principal from any manufacturing defects. The installation to be in line and level including the cost of all material, disposal of debris etc, complete to the satisfaction of eng in charge( inclusive of profile) basic rate of carpet –rs 75 per sq (make-unitex)

Providing and fixing of jute/fabric finish roller blind on windows opening the rate shall be inclusive of all necessary hardware complete. The blind will be operated manually .All work shall be carried out as per detail drawing and instruction of Architect (Make AD+Mac vista)

Executive Table with Runner :-Table size :(1800mm x1000mmx750mm) & Runner Size:- (900x450x650) Providing and fixing in position table as per design by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thick laminate & unexposed surface to be finished in matching coat of French polish/1.00 mm Thick laminate (if Req.) Coates, including cost of all hardware etc. work complete as per instruction Architect/Eng. in charge. Plywood century, green ply, duro, archid or equivalent make furniture Greenguard/BIFMA certified co)

Executive chair(high back) supplying and installing high Back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection molded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly, the armrest top made up of injection molded polyurethane and mounted on the injection molded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum filleted with 5 no twain wheel castors which ar injection molded in back pp all complete as per manufacture specification and direction of eng in charge.

Providing & fixing in position Assistance/computer table (size 1200 mm x900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood (boarder area) for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , ( all plywood used only , century, greenlam, acero, gold wood or equivalent make ). (furniture Greenguard/BIFMA certified co)

Providing and fixing of chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt synchro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow ASSY: it is 3 pc telescopic type and injection molded in black pp. The pedestal is injection molded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors). (Make-godrej /Herman miller/Haworth)

Providing and placing of mid back revolving chair ,chair type bio Synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminium die cast with abs/nylon pu foam covered with mesh fabric 220 gram gsm thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply.

Providing and fixing of Single seater sofa of size 600mmX 650X400mm in length with primary/secondary frame structure made with 19mm BWP plywood and 70mm elastic belt and 10mm foam around the framing and legs (if Reqd.) of sofa made with first class best quality seasoned teak wood as per directed by Architect/eng in charge. Sofa should be have cushioning with 36D Foam+20mm thick 28 d foam 25mm butter foam and covered with white finish cloth and then with premium quality fabric upholstery. (Make- Greenguard/BIFMA certified co)

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thk laminated finished and legs (if Reqd.) and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge (Make- Greenguard/BIFMA certified co)

Providing and fixing of file storage cabinet 450mm wide file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thk laminated all drawer to be mounted on telescope channels of (Hettich/ebco or equivalent)approved make .All exposed edges to be finished with Ist quality beading.All inside surface to be finished with 1.00 mm thk laminated.The cost is inclusive of all material,accessory,SS handle lock labour ect complete. (Make-century,greenply,duro,archid)

Curved MDF Paneling:-Providing &fabricating paneling on Existing curved wooden frame work The frame work shall be clad with 6+6 mm thick flexi ply &4mm thick MDF finished with approved color Duco paint, complete as per Dwg detailed or instruction of the Eng.-in charge

Providing and placing Notice Board (6x3) of made Godrej/Herman (6x3) of Make Godrej/Herman miller /Haworth/knoll having the following specification:-Size of board shall not be less than 6”wx3”H Surface material shall be woolen felt fabric. Core material shall be min 9mm thick soft board. Best quality rubber spray bale adhesive shall be used Backing material shall be 0.62 mm to 0.82 mm thick laminates sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet. Aluminum frame shall be anodized (5 microns thick. Extruded aluminum section designation 63400 as per IS: 1285-2002-16 mm thick) chrome plated wall mounting bracket at all four corners fitted with aluminum revert. The Agency product shall be BIFMA compliant as per approved sample of Notice Board by Eng. in charge in consultation with client department before providing it at site

Providing and placing 4 Door important document case of make Godrej/Herman Miller /Haworth having the following specification: it shall have the configuration of 914 mm (W) X320 mm (D) 1742 mm (H) it shall have unique design providing the right rigidity to top hinged doors to facilitate easy use. The shall have a right knock Down construction. The top panel, back panel and side panel shall be made of 0.7mm high yield CRCA and other components from 0.8mm CRCA Each door shall have a 6 lever cam lock with common key.3mm thick glass shall be used in each door to clear inside vision which shall be secured in a metal frame through a rubber gasket. Scissor Mechanism shall be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each Door shall be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDI .Capacity of max80kg.The 2 Door case shall have 18mm PLB top straight edge with PVC lipping. The finishing shall incide Epoxy power coated to the thickness of 50 microns .The agency product shall be BIFMA Compliant as per Approved sample of 4 Door document case by Eng.-in –charge in consultation with client department before providing it at site.

Two track two panels/Three sliding windows made of frame 67x50mm &sash 46x62 mm both having wall thickness of 2.3+-0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Are of windows above 1.50 Sqm to up to 3.5 sqm)

Door Paneling :- Providing & fixing for paneling on walls /column /beam etc. by using dimensionally stable and wrap free BWP plywood/blackboard/MDF(IF Req) sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall should properly fixed with M seal compound and rawl plug. Finally all exposed surface finished with 1.00 laminates/The job shall be included all material labour wastage ect complete plywood marine grade IS 710,work complete as per instruction of architect. (Plywood century,greenply,duro,archid or equivalent make)

Providing and fixing decorative laminate as per IS With marine grade PVC Glue (fevicol) applied @0.45 kg per sqm to partition ,paneling roof beam or similar places as directed in design and pattern having pin groove. a) 1.00mm thk plain gloss satin finish

Providing and glazed laying multi charge full body matt finished vitrified tiles of sizes having water absorption less than 0.05% and conforming to is: 15622 of make :-Rak Nitco premium quality laid on 20mm the base of cement mortar 1:4 (1cement” 4 Sand) in all shapes and design including epoxy resins matching combined with a filler power grouting the joint work complete as per direction of eng in charge Tile size (600mmx1200mm) and (9-12 mm Thk)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. basic rate of WPC Sheet is RS 300 to 350 per Sqft.

Supplying and installation automatic stainless steel Body 3600 wt hand dryer Ac 220-260 hot/cold waves auto cut off within 60 sec and 4500 RPM speed, waterproof product With touch free infra red activation wall mounted

Supplying and fixing 8 mm thickness polished Mirror glass fixed on wall with SS 35X5mm bolt and Mirror glass all edge finish curved shaped with Designing itching Work (if reqd.) , work complete as per instruction of Eng in charge. (Make-Saint-Gobain, Hosley)

Supplying and installation of 65” interactive flat panel, infrared Technology,i5/4GBRAM/256 SDD Hard disk with video conferencing through UHD camera, Interactive whiteboard, MS office professional &windows 10 professional, With 3600D HD zoom camera inbuilt (Make-ViewSonic/LG/SAMSUNG)

Supplying and testing & installation of Server of RFP Parameter:-Remoter power on/shutdown of server, Remote Management of server over LAN &wan With SSL encryption through gigabit management port should have virtual Media support with all required licenses, Remote KVM Server Health Logging, Management of multiple servers from single console with single source of truth for multiple sites. Automated infrastructure management for patch upgraded version upgraded etc., simplified management with analytics driven actionable intelligence, system tagging giving admin flexibility to provide metadata tag to each system attributes. Hardware profile based deployment of single policy to multiple servers simultaneously, Platform inventory and health status server utilization statistics collection( including firmware updates and diagnostic tools) Should provide an alert in case the system is not part of OEM Hardware compatibility test solution should be open and programmable providing Rest APL.SDK for Programming languages, Server Security secure boot(Firmware and bios level security) Provision to lock the system on Breach .Hardware root of trust /DUAL Root of trust/Dual Root of Trust, server should provide policy based security, server should provide servers intrusion detection. "Malicious code free design”(to be certified by OEM) Provision for cryptographic firmware updates capability to stop execution of application/Hypervisor/operating system on predefined security breach, Secure/Automatic BIOS recovery, Network card secure firmware boot, in case of any security breach system should provide the lock down feature 01) COMPATIBLE CHIPSET, 02) Display:-18.5” TFT, 03) Processor Description :-AMD EPYC 8 CORE/16 Threads,3.0 GHz base frequency ,Min 32 MB Cache 04) Form factor:- 1 U RACK, 05) Memory Slots:-16 DDR4 DIMMM Slots,Memory Frequency 2933 MHz, 06) Memory configured:- 2x16 GB DIMMs, 07) HDD Storage:-no of Slots-4 Capacity offered per SATA drive-2000 GB, 08) RAID Controller:-0-10, 09) Power Supply:-Platinum rated power supply 550 watts Maximum power consumption Make-HP/EMC/IBM. Note:- The Bidder Shall quote his own rates for item rates.

Bidder Name

Amount

MAA KALI CONSTRUCTION(GSTN-23AHLPJ8592J2ZS)