Providing and laying floor tiles and white washing replacing door and window flooring etc in Class IV Quarter No 3 Canal Colony Binjhol Panipat

Amount

Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles HSR 14.89 Note:-Tile shall be of premium quality (First Quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK

Providing & fixing virtified tiles of size 600x600mm of approved make in skirting/ dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. (HSR14.90) Note:-Tile shall be of premium quality (First Quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS.

Providing & fixing creamic/anti skid tiles of size 400x400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. (HSR14.91) Note:-Tile shall be of premium quality (First Quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS.

Wire guage commercial hard wood such as hollock, champ, chikrassy and chaplash etc. (non-coniferous timber other than teak conforming to I.S. specificaiton No. 1003 kiln seasoned) door & window shutters without springs housed in chowkats i/c chocks, iron hinges and screws etc. complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same) 30 mm thick. HSR 17.31 (a)

Providing & fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry i/c pointing in white cement mixed with pigment of matching shades complete size of ceramic Glazed tiles 300x450mm. HSR14.92 (b)

Supply & fixing glass panes with moulding of commercial hard wood such as hollock, Champ, chikrassy and chaplash etc. (Non coniferous timber other than teak, conforming to I.s. specification No. 1003, kiln seasoned) 2mm thick (glazing area upto 9 sq. dm of each pane). HSR 17.36 (a)

Pressed steel sheet door & window frames (chowkats) consisting of 2mm thick steel sheet of the specified section including iron lugs (hold fasts) iron hinges, conforming to PWD specification, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paints red lead non setting primer of approved quality, fixed in position including the cost of cement 1:3:6 for filing in the frame, and cement concrete 1:3:6 for lugs complete - door and window frame of size 114mm X 50mm with 35mm wide double rebate. HSR 18.34 (d)

Providing & fixing in position best indian make European type water closet suite with concealed 'P' or 'S' trap with or without vent (As approved by Engineer-in-charge) white. HSR 30.6 (i)

Providing & fixing in position CP brass stop cooks (As approved by Engineer-in-charge) 15mm stop cock male & female. HSR 30.76 (a) (i)

Providing & fixing in position 15mm i/d CP brass stop cooks of best quality (As required by Engineer-in-charge) stop cock long body. HSR 30.75 (c)

Scraping white washing and colour wash. HSR 8.32 (a)

Preparation of plastered surfaces for oil bound distempering i/c sand papering the surface, applying one coat linseed oil and finishing with approved quality filler, consisting of white lead, linseed oil, vernish and chak mitti including finishing the surface to the required finish, complete HSR 16.52

Distempring with washable oil bound distemper (of approved manufacture) two coat on old distempered work. HSR 16.60

Painting two coat with ready mix paint in all shades on old wood work to give an even shade including rubbing down old paint. HSR 16.6

Factory manufactured panelled and glazed door shutters of commercial Hard wood such as hollock, champ, chikarassy and chaplash etc. (non-coniferous timber other than teak conforming to IS specification No.1003, kiln-seasoned) with 100mm wide vertical styles, 150mm wide lock rail, 200mm wide bottom rai;l and 100mm wide other rails, with panels of 12mm thick, commercial veneered both side particle board or plywood of BWR grade, hot pressed, including cost of iron hinges, screws, chock/cleats, stops and nails etc. complete fixed in position (excluding the cost of any fittings, other than specified above but including labour for fixing the same in position 30mm thick HSR 17.91 (a)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. HSR 16.2

Removing door (Wood & steel) with chowkhats by making recesses in walls when the wall is not to be dismentalled. HSR 8.17 (a)

Extra for providing and fixing vitreous automatic flushing cistern including fitings and brackets instead of C.I. flushing cistern complete 10 ltr capacity cistern (mixed colour) HSR 30.37 (b) (iii)

Providing and fixing in position glass shelf fixed in with RAWL with C.P. brass screw complete including cutting and making good the walls etc 600mm x 125mm HSR 30.69 (a) (i)

Providing and fixing in position best Indian make towel, rails fixed with rawlslugs embedded in walls with CP brass screws, complete in all respect including cutting and making goods the wall etc. 25 mm dia CP Brass adjustable 750mm long HSR 30.68 (a) (i)

Laying 1st class brick work 1:3 in F & P HSR 11.5

12mm thick cement plaster 1:4 on wall. HSR 15.5

Providing and fixing modular type accessoriesm of approved make in existing box including fixing and making necessary connections, complete in all respect Switch 10 AMP HSR 31.56

Providing and fixing modular type accessoriesm of approved make in existing box including fixing and making necessary connections, complete in all respect Sockets 10AMP HSR 31.56

Providing and fixing modular type accessoriesm of approved make in existing box including fixing and making necessary connections, complete in all respect Fan Regulator HSR 31.56

Providing and fixing modular type accessoriesm of approved make in existing box including fixing and making necessary connections, complete in all respect Switch 20AMP HSR 31.56

Providing and fixing modular type accessoriesm of approved make in existing box including fixing and making necessary connections, complete in all respect Sockets 16AMP HSR 31.56

Conglomerate floor 25mm thick cement concrete topping 1:2:4. HSR 14.8

Providing and fixing medium density fibre board (MDF) interior grade in partitions inclduing fixing to frames backing or studding screws complete 19mm thick HSR 17.65 (A) (b)

Providing & fixing plastic laminated sheets thickness, not less than 1.5mm (conforming to IS specification), including cost of approved adhesive complete glossy finish HSR 17.88 (b)

Credit of 2 No. doors

Credit of 6 No. stop cock and 6 No. bib cock