Development of Lodhi Garden. SH- Construction of Red Bajri Path along with sprinkler system in Lodhi Garden Under R-II Division.

Amount

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kind of soils

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kind of soils

Providing and laying at or near ground level machine cut curved sunk and moulded Red sand stone, kerb stone in edging of required length as per site condition in position to the required line, level and curvature jointed & pointed without grooves along with matching pigment ( thickness of joints except at sharp curve shall not more than 5 mm ) Making provision of drainage opening wherever required complete etc. as per direction of Engineer-in-charge. ( Contractor have to arrange stone cutting machine , generator etc for matching the existing design and shape of kerb stone ) ( Length of finished kerb edging shall be measured for payment). Red sand stone kerb stone shall be approved by Engineer-in - charge.

Supplying and stacking at site.Good Earth

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Supplying, Stacking & Spreading 40 mm thick layer of double wash red bajri with negligible silt content,including sieving, watering and rolling complete including preparation of the surface and rolling. With road roller/ hand roller complete as per direction ,& entire Satisfaction of Engineer Incharge.

Providing and Laying UPVC slotted pipe:IS: 12818 complete including single layer wrapping of Geotextile cloth of 250 GSM ,trenching and refilling etc.External work. 100mm Dia nominal bore.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kind of soil.

Supplying and placing in position FRP under ground water tank of capacity 10,000 litres of Make Sintex, Frontier or equivalent, including making required connections for inlet and out let water supply line complete as per instruction ,direction and entire satisfaction of Engineer -In charge.(Earth work excavation will be paid seperately)

Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Dinesh/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge.Pipe 90 MM PN06 PE100

Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Dinesh/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge.Pipe 63 MM PN06 PE100

Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Dinesh/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge. Pipe 50 MM PN06 PE100

Providing & fixing of HDPE Lateral Pipe Line conforming to IS:4984, make Timetechnoplast/Supreme/Dinesh/Duraline or Equivalent suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adaptors, flanged etc. jointing as per manufacturer's instructions, including earth work in excavation and refilling (Earth work includes 300-450 mm of soil cover over the pipe). complete as per direction and entire satisfaction of engineering in charge. Pipe 40 MM PN08 PE100

Providing & fixing of LPS Series Pop up spray head having variable arc nozzle capable of covering 1.2-5.5 m at 1.4-3.5 Bars with a discharge rate of 0.04 lps to 0.24 Lps, inlet size 1/2".The overall pop-up height shall be 4 inch. The Spray Head body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic. make K-Rain (USA) / HIT (USA) / Rain(Italy) or equvalent,, It shall have a heavy-duty stainless steel retract spring for easy alignment of the pattern. The spray head shall have a soft elastomer pressure-activated co- molded wiper seal for cleaning debris from the pop-up stem as it retracts into the case to prevent the spray head from sticking up to minimize "flow-by." The spray head shall have a Flush Plug pre-installed. The plug shall prevent debris from clogging the spray head during installation and allow for the system to be flushed before nozzling. The plug shall be bright orange in color and constructed of polypropylene material. complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 3/4 or 1/2" Pop up Connecting Assembly. The tubing shall be made of polyetylene having wall thickness of 2.5mm ,maximum working pressure of upto 8.3 bar. The fittings shall be made of UV resistant thermo plastic. make Toro (USA) / Irritrol (USA) / Perrot(Germany)/ Spanco or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Making connection of G,I distribtion branch with G.I Main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc complete .50 to 80 mm nominal bore.

Providing & fixing of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of make Harit (India) / Aqua (India) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge. 63mm Size PVC Ball Valve (for agriculture use)

Providing & fixing of a double acting Air release valve 2" made of high strength aluminium / plastic with fibre glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 6 Bars and tesing pressure shall be 10 Bars.- make Harit/Jain (India) or equivalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 12" Rectangular valve box with cover for main line and lateral line Valve. The valve boxes shall be heavy duty plastic with poly vinyle chloride reinforce and a green top. make K-Rain (USA) / HIT (USA) / Rain(Italy) or equivalent - complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pressure Guage (glycerine filled) having 2" Dial, thread Size: 1/4" BSP Male, Standard Version - make Harit (India) / Aqua (India) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Automatic Disc filter (120 mesh) 50m3 /hr having an inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" ,a helix made of fiber glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars. . Harit/Aqua/Armas/Amaid

Providing & Fixing of 7.50HP three phase Booster Pump of make Kirloskar/KSB/CRI or equivalent Capable of Discharging 4-8.4 lps at 32-50 mtr Head with suction and delivery size 65x50mm with suitable L&T/Havells or equivalent make Control Panel having ammeter, voltmeter, single phase preventer, and all necessary protections ,including suitable Foot Valve, Non Return Valve of (Make Supreme/Automat or equivalent), Suction and Delivery assembly complete as per instruction direction and sample approval by Engineer-In-Charge.

Supplying and fixing stainless steel 304 grade 2'' Delivery & Header pipe 1.5 m approx suitable for fixing 2 no 7.50H.P pumpsets including fittings & accessories like Required size flanges ,Isolation Butterfly Valve, pressure transducer etc.of make Harit (India) / Aqua (India) / Rain(Italy) / Supreme or Equivalent , complete as per instruction ,direction and entire satisfaction and sample approval by engineer in charge.(Complete weight of SS Header excluding Accessories shall not be less than 12Kg)

Providing & Fixing 2" BSP Straight flow 3 way Solenoid valve with victaulic grooved coupling flow control and "pressure regulation unit" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. make Hydromat (India) / Aqua (India) / Rain(Italy)or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Pro 2 Controller with 2 witre technology (24 Station) having four programs with four start times per program with run time per station 0-10 hrs and irrigation water budget by program 0-200%, capable of running two program simultaneously with two nos. of maximum valves plus master valve running simultaneously and should have rain sensor capability.K-Rain USA/Rainspa, Italy/HIT USA/ HUNTER

Providing & Fixing of Single Station Decoder having ISP 2 wire modules are rated at 20 KV Surge Protection, make K-Rain (USA) / HIT (USA) / Rain(Italy)/ HUNTER or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of Line Surge Protection unit for protection of Irrigation System, make K-Rain (USA) / HIT (USA) / Rain(Italy)/ SCHNEIDER or equvalent,complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of 5/8" x 8' feet long Copper Clad Grounding Rod (not less than 4 kg ) & Clamp for Decoder Controller & LSP. make K-Rain (USA) / HIT (USA) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing & Fixing of DBR/Y Water Proof Wire Connector The 3M™ Direct Bury Splice Kit DBR/Y is used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct burial. The kit includes a 3M™ Performance Plus Wire Connector R/Y+ and a high impact, UV-resistant polypropylene tube prefilled with moisture- resistant grease. Maximum Voltage Rating:600 V Application Temperature:32°F to 120°F (0°C to 49°C) Operating Temperature: -40°F to 221°F (-40°C to 105°C), Tube :Impact and UV Resistant Light Blue Polypropylene. make Harit (India) / HIT (USA) / Rain(Italy) or equvalent, complete as per direction and entire satisfaction of engineer in charge.

Providing & Fixing of Conduit Pipe 20mm dia for laying of electric wires. AKG/Supreme/Finolex

Providing & Fixing of Water Level Sensor. Automat/L&T/Siemans or equivalent complete as per direction of Engineer In Charge.

Providing & Fixing of 1.5 sqmm double Core Copper Conductor Flexible Wire. make Macrotherm (India) or equvalent, complete as per direction and entire satisfaction of engineering in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

YATENDER SINGH (BID ID -1615812)