PROVISION OF TEMPORARY SHED ON THE ROOF OF SAILORS INSTITUTES WITH ALUMINIUM SLIDING WINDOW/DOORS AND ELECTRICAL FITTINGS AT OTM COMPLEX PARADIP UNDER GE (I) (CG) BHUBANESWAR

Amount

M&L brickwork with fly ash bricks, built in cement mortar 1:6 straight or curved on plan exc 6m mean radius on plain complete all as specified and directed.

M&L for rendering 15mm thick on concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10mm thick on fair faces of of brick work or concrete surfaces in CM (1:6) finished fair & even complete all as specified and directed.

M&L PCC type B-2, (1:2:4) using 40mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillar and posts (including caps and bases) complete all as specified and directed.

M&L for new surfaces of wall applying two or more coats of 100% premiusm acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (copany Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @0.90 litre/10 Sqm over new surfaces complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coat of plastic emulsion paint over a coat of acrylic primer over a coat of white cement putty complete all as specified and directed.

Dismantling floor, hearth or wall tiling, dados of any description and size including cement mortar bedding (but not backing), removing serviceable tiles and staked properly to made on credit and remaining rubbish off the premises complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, flooring and landings of stair case, risers, treads and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigement to match with marble shade of Makrana white over and incluidng 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for edge moulding to 18-20 mm thick marble stone of counters vanities etc including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. (Note : Glass shall be measured and paid separately as supply only)

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc (thickness or powder coating not less than 50 micron) complete all as specified and directed. (Note : Glass shall be measured and paid separately as supply only)

S&F aluminium powder coated grill 10 mm dia rod square, rectangular, circular or similar type of shape, fixed with 'H' or 'F' channel complete all as specified and directed. Make : DECOGRILL - DG 202/weight 4.282 Kg/Sqm or similar make as mentioned in PS)

Supply only 4.8 mm thick sheet glass, ordinary quality in square area exc 0.5 Sqm in each pane for fixing in aluminium framing complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless teel wire staples complete all as specified and directed.

S&F 100 mm size aluminium handles, cast type anodised complete all as specified and directed.

S&F 75 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 75mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for steel work in tubular trusses, vertical posts, rafter, purlin inlcuidng special shaped washer, nuts, bolts for fixing, tapping, screwing etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F mild steel screw bolts 11 to 15mm (machine made0 with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and directed.

M&L for prearation of new steel surfaces of any description, not otherwise, described, over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F standard aluminum door seal of 0.9 to 1.2 mtr length each with nylon brush at lower side to fit at bottom of door with screws complete all as specified and directed.

Taking down and refixing aluminium window shutters and making unworkable shutters workable (which includes replacing roller, rubber beading etc) complete all as specified and directed.

Surface excavation in soft/loose soil n.exc 30 cm deep & averaging 15cm and getting out complete all as specified and directed.

M&L for hard core of broken stone/boulder or quarried stone of gauge exc 63mm but n.exc 100mm, depositing,s pread and levelled in layers n.exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC type D-2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

S&F GI tubes 15mm bore, medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubes 20 mm bore, medium grade galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore fancy type, chromium plated with long shank and cup (concealed type) stop valve cast copper alloy screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&f 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part I including taking down old unserviceable PVC tank of 1000 litres complete all as specified and directed.

S&F 20 mm bore ball brass valves, high pressured, with polythene float and fynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L for precast cement concrete (reinforced) type B1 (1:2:4) using 20 mm graded stone aggregate as in cover slabs (for manholes etc) incluidng formwork and set in cement mortar 1:6 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F vertical roller venition wooden blind best quality of any colour complete with all its accessories fixed to wall with screws complete all as specified and directed. Make : Vista Lebolor/MAC/Aeroluxe

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Material and labour for 16 mm thick mineral fiber or polycarbonate ceiling of size 600 x 600mm board Acoustic CAC-35, fire reaction Class 1 as per BS 476 Pt-6 & 7 (UL), light reflectance-0.90, NRC > 0.6 standard humidity resistance-99% and fine texture factory applied latex paint, including GI frame work for ceiling main tee of size 24 x 32 mm., having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary stitched cross tee of size 24 x 27 mm, having 0.27 mm gauge at every 600 mm. c/c. and sub cross tee of size 24 x 27 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle of size 19 x 19 mm, having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c. in both directions using 2.0 mm dia pre straightened GI wire laying fine fissured butt edge complete all as specified and directed.(Make: Armstrong or equivalent)

Demolition of RCC of any description n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of PCC of any description n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including bituminous filler at expansion joints finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size FRLS PVC insulated unsheathed cable 1100 Volt grade, conforming to IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed coduit, including cutting chases and making good disturbed surface complete, including single core solid FRLS conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

(a) One light point controleld by one way switch

(b) One 3 pin socket outlet, 5/6 amps, on independent board

All as per item No 46.00 hereinbefore but with copper conductor 2.5 Sqmm for one 3 pin socket outlet, 15 amps on independent board complete all as specified and directed.

S&F modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F modular socket, 6A- 2/3pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F ceiling rose, surface bakelite 65x50 mm, three terminals complete all as specified and directed.

S&F modular white cover plate with frame including metal flush box, 4 module complete all as specified and directed.

S&F modular white cover plate with frame including metal flush box, 4 module complete all as specified and directed.

S&F modular white cover plate with frame including metal flush box, 6 module complete all as specified and directed.

S&F of modular fan regulator, 120 watts step type two module complete all as specified and directed.

M&L for submain wiring complete with 2 single core multi stranded copper conductor 10 Sqmm (Nominal area) PVC FRLS insulated unsheathed cable drawn in and including medium grade PVC conduit ISI marked not less than 25mm dia concealed including making good disturbed surfaced of wall, including PVC FRLS insulated cable single core multi stranded copper conductor 10 Sqmm size as earth wire drawn in same conduit complete all as specified and directed. Note – 2 Nos of single core cable along with earth wire and PVC conduit shall be measured as one length.

S&F softglow fully diffused recessed mounted 600mm x 600mm LED troffer with microprismatic diffuser suitable for indoor spaces complete all as specified and directed. Make : Philips Cat Part No RC380B LED 36S-6500G5

S&F ceiling fans 3 star, complete with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction motor copper bound complete all as specified and directed.

S&F flush mounting factory made Ekinoxe SPN DBs double door IP-43 protection, IK-09 with metal door with neutral bar, earth bar and cables ties for cable management fully insulated busbar 12 way, complete all as specified and directed. Make : Legrand/Siemens/Schneider.

S&F MCB single pole and neutral, 240 volts, 40 Amps breaking capacity 10 KA, 'C' series etc complete all as specified and directed.Make : Legrand/Siemens/Schneider.

S&F MCB single pole, 240 volts, 6 to 32 Amps 50 HZ, 10 KA, 'C' series etc complete all as specified and directed.Make : Legrand or equivalent in Siemens/Schneider.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and installl hi wall split units indoor/outdoor copper binded complete with cordless remote control unit and with in built air ironiser and plasma filter for better indoor air quality with minium 3 star raing and EER 3.2 of capacity 1.5 TR complete all as specified and directed. Make : Hitachi, Voltas, Daikin

Supply and installl hi wall split units indoor/outdoor copper binded complete with cordless remote control unit and with in built air ironiser and plasma filter for better indoor air quality with minium 3 star raing and EER 3.2 of capacity 2.0 TR complete all as specified and directed. Make : Hitachi, Voltas, Daikin

S&F voltage stablilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130V to 300 V with output voltage stablized at 230V with accuracy of + 2.5% and of capacity 5 KVA complete all as specified and directed. Make : V Guard/Microtech/Blue Line

S&F copper tubing pair of two pipe for suction & discharge size of suction pipe 1/2" & discharge pipe 1/4" diameter 0.8 mm thick complete with separate nitrile vinyl insulation 9 mm thick etc, including chase cutting wall & making good of existing surface as required on site complete all as specified and directed.

S&F wall/floor mounting type mild steel powder coated stand heavy duty for out door unit as per manufacturers recommendation complete all as specified and directed.

M&L for unplasticised PVC pipes of pressure rating fixed complete to walls, ceilings or in floors etc, size 25mm dia pipe including chase cutting on wall & making good as per existing complete all as specified and directed.

S&F MCB single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with and including one MCB single pole 25 Amps, C series 240 volts complete all as specified and directed.

M&L for submain wiring complete with 2 single core multi stranded copper conductor 4 Sqmm (Nominal area) PVC FRLS insulated unsheathed cable drawn in and including medium grade PVC conduit ISI marked not less than 25mm dia concealed including making good disturbed surfaced of wall, including PVC FRLS insulated cable single core multi stranded copper conductor 4 Sqmm size as earth wire drawn in same conduit complete all as specified and directed. Note – 2 Nos of single core cable along with earth wire and PVC conduit shall be measured as one length.

RANA ENTERPRISES

ANAND CHANDRA DAS

boon construction company