Finishing works of Control Room Building

Amount

Kota Stone slab flooring over 20 mm thick (average) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, includding rubbing and polishing complete with base of cement mortar 1:4 (1 Cement : 4 Coarse sand). 25 mm thick. (Item code 11.26.1 & 11.27)

Providing and laying 10 mm. thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alakli resisting cement as per IS:4457, complete as per the direction of engineer in charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand) Acid and alkali resistant tile. (Item Code 11.21.1.1 & 11.21.2.1)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface even and smooth complete. (Item code 13.26)

Providing & fixing anodized Aluminum doors, windows, Ventilators and glazed partitions with extruded built up section standard tubular and other sections of approved make confirming to IS:733 and IS;1285 anodized transparent or dyed to required shade according to IS 1868 (minimum Anodic coating of grade AC 15) fixed with Rawl plugs and screws or with fixing clips or with expansion board fasteners I/C necessary filling up of gaps at junctions at top bottom and sides with required PVC/ neroprene flat etc. Aluminum sections shall be smooth ,rust free, straightand jointed mechanically wherever required i/c cleat angles aluminum snap beading for glazing /paneling CP brass stainless steel screws or complete as per architectural drawing and directions of Engineer -in -charge. For door, windows and ventilators and glazed partition frames (Item code 21.1.1.1)

Providing & fixing anodized Aluminum doors, windows, Ventilators and glazed partitions with extruded built up section standard tubular and other sections of approved make confirming to IS:733 and IS;1285 anodized transparent or dyed to required shade according to IS 1868 (minimum Anodic coating of grade AC 15) fixed with Rawl plugs and screws or with fixing clips or with expansion board fasteners I/C necessary filling up of gaps at junctions at top bottom and sides with required PVC/ neroprene flat etc. Aluminum sections shall be smooth ,rust free, straightand jointed mechanically wherever required i/c cleat angles aluminum snap beading for glazing /paneling CP brass stainless steel screws or complete as per architectural drawing and directions of Engineer -in -charge. For Shutters of Doors, Windows and ventilators including providing and fixing hinges/pivots and making provision of fixing of fittings wherever required including the cost of EPDM rubber/ Neoprene Gaskets required (fitting shall be paid for separately) (Item code 21.1.2.1)

Providing and fixing glazing in aluminium door, window, Ventilator shutter and partitions etc with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge. (Cost of aluminium snap beading shall be paid in basic item) Glazing with glass pans of 5.00 mm thickness (weight not less than 13.75 Kg / Sqm.) Single Toughened glass for kitchen, toilets etc. (Item code 21.3.2)

Providing and fixing glazing in aluminium door, window, Ventilator shutter and partitions etc with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge. (Cost of aluminium snap beading shall be paid in basic item) Glazing with glass pans of 5.00 mm thickness (weight not less than 13.75 Kg / Sqm.) Double Toughened glass for kitchen, toilets etc. (Item code 21.3.2)

P/F Aluminium composite panels 5.00 mm thick complete in all respects (Item code 8.32)

Providing & fixing Double action hydraulic floor spring of approved brand & manufacture (confirming to IS 6315 for Aluminum doors cost of cutting floor as required embedding in floors & cover plates etc complete as per the direction of Engineer -in charge (Item code 21.4.1)

Providing brick bat for soak pit filling complete in all respect as per direction of Engineer in charge.

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cuttings and making good etc. complete. (Item code 21.13)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 250x10 mm. (Item code 9.97.2)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm. (Item code 9.100.1)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper. (Item code 9.101.2)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (Item code 13.85.3)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats. (Item code 13.83.2)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Item code: 9.84)

M/s Kamla Contruction (BID ID -591610)

Manveer construction (BID ID -591612)