Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹26.5 LAdmitted-Finance | -39.87% | ₹26.5 L | L1 | Admitted-Finance |
| 2 | L2₹27.3 LAdmitted-Finance | -37.99% | ₹27.3 L | L2 | Admitted-Finance |
| 3 | L3₹27.9 LAdmitted-Finance | -36.77% | ₹27.9 L | L3 | Admitted-Finance |
| 4 | L4₹28.2 LAdmitted-Finance | -35.99% | ₹28.2 L | L4 | Admitted-Finance |
| 5 | L5₹29.3 LAdmitted-Finance | -33.50% | ₹29.3 L | L5 | Admitted-Finance |
Tender Value
₹44.1 L
EMD Value
₹88,120
Closing Date
5 Feb 2026, 6:00 pmClosed
EXECUTIVE ENGINEER-III
UDA Office Udaipur
Construction of Road in New Hansha Vihar (Kh No. 208, 210, 2743/186, 2753/207, 2756/211, 2757/211) Revenue Village Ayad. 7403
2026_UITUD_530339_1
NIT_74_03
Open Tender
Civil Works
120 days
Udaipur
Please Refer Tender Document
2 documents required · 2 mandatory
₹590
Refer Tender Document
₹88,120
Yes
6 Feb 2026
21 Jan 2026
6 Feb 2026
21 Jan 2026
5 Feb 2026
21 Jan 2026
Item Code [2019 H 1.13]:Item Type [building] :: Sub Item Code [2019 H 1.13 + 1.13.2]: Supply of different varieties of bougainvillea in poly bags / earthen pots according to height growth & age of plant at site including loading, unloading & transporation etc. complete. Different varieties of bougainvillea 600 mm to 900 mm
Item Code [2022 1.3]:Item Type [building] ::Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Sub Item Code [2022 1.3 + 1.3.1]: Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth
Item Code [2022 1.6]:Item Type [building] :: Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil
Item Code [2022 12.46.1 Enamel paint]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Item Code [2022 3.1.6]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
Item Code [2025 16.14.1]:Item Type [road] :: Providingand laying dense graded bituminous macadam with 100-120TPH batch type HMP producing an average out put of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with ahydro static paver finisher with sensor control to the requiredgrade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers toachieve the desired compaction as per MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) Grading - I (37.50mm (Nominal Size)
Item Code [2025 17.30]:Item Type [road] :: Raised Pavement Marker (Cat’s Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS moulded body and polycarbonate reflective panels with micro-prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35,000 kilogram tested in accordance to ASTM D 4280 & ASTM D 788. The height of road stud is 20 mm, width 100 mm, length 100 mm and minimum reflective area of 13 sqcm on each side. The strength of detachment of the integrated cylinder shank not less than 14 +/- 2 mm (thickness) and height not less than 30 + 2 mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive
Item Code [2025 5.1]:Item Type [road] ::Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502
Item Code [2025 road 4.9 CRM]:Item Type [road] :: Crusher Run Macadam Base Providing crushed run stone aggregate greadingc onforming to table 400-14 depositing on aprepared surface by hau ling vehicles , spreading and mixing with amotor grader , watering and compacting with a three whee l80 - 100 kN static roller as per MoRTH Specification Clause 407 to for ma layer of sub - base / base By .mixing plant method With 53 mm maximum size of aggregates
Item Code [PWD BSR 2025 16.15]:Item Type [road] :: Sub Item Code [PWD BSR 2025 16.15 + 16.15.2]: Providing and laying bituminous concrete with 100-120 TPH batch typehotmix plant producing an average out put of 75 tonnes per hourusing crushed aggregates of specified grading, premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mixand filler, transporting the hot mix to work site, laying with ahydro static paver finisher with sensor control to therequired grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-I ( 19 mm nominal size ) Bitumen (VG-30
Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
Item Code [road 2025 3.14]:Item Type [road] :: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads ,transporting to site,spreading ,grading to required slope and compacted to meet requirement of Table300-2 with lead upto 50 m as per MoRTH Specification Clause 305.3
Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503.
Item Code [Road BSR 2025 4.6]:Item Type [road] :: Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406 By Mechanical Means with all lead
Item Code [RUIDP 20222 10.1 KERB]:Item Type [RUIDP] :: Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
General_Conditions2025.pdf
Tender Documents • 1.03 MB
BOQ_945549.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid