Construction of Hydraulic Gate on Shaji Khul at Offtake point at Vailoo.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Dumping stone including cost of stones. In Horizontal on level

Hand-packing stones in wire-crates; excluding cost of crates and stones

Hand-packing stones in wire-crates; including cost of crates and stones

Supply and fixing of 4mm dia B.A wire woven crates with lid /binding wire. (4"x4" mesh) as per ISI specification including all carriages ( manual /Mechanical) up to site of work complete Job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-mechanically Treated bars of grade Fe-500D or more.

Fabrication and installation /commissioning of gates including all carriages upto site of work as per specification. A) Shutter of size 1.80 m x 1.20 m .The shuttrer shall be fabricated with ISMC 125 frame with supporting members ,with 8mm plate on one side . b) Winch rod of 50-55mm dia .(double square threaded of required length with sleeve of appropriate dia. c) Single heavy duty ,thrust bearing 3MT Capacity winch machine(worm gear and lock type)with brass gun metal bush nut of appropriate dia of standard quality and brand. d) 150mm rubber seal -PVC IST quality. e) Casing to winch rod and machine. f) The whole structure shall rest on superstructure supported by ISMC 150mm channels. g) Two coats of synthetic paint(water resistant epoxy paint) over a coat of red oxide primer . h) All accessories as required , including nuts and bolts ,flats etc. i) All carriages of all items including fabrication at site completejob as per direction of Engineer-in -charg

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.