Construction of toilet below raain shelter Bus Stand Sector No 3 New Shimla

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class Deodar wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick :Second class Deodar wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing ISI marked bright finished MS sliding door bolts with nuts and screws etc. complete :including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass handles with screws etc. complete:125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Stone soling properly hand packed filling interstices with kharanja stone and consolidating with power road roller to the required gradient and comber including spreading, watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specification. 100mm spread thickness (finished work including materials and labour) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 10 mm thick anti skid resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- charge including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 1st quality ceremic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

8 mm thick Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete upto all heights in all floor level . including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing water closet squatting pan (European type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass bib cock Cera/Hindware/Jaquar or equivalent approved quality conforming to IS:8931 : 15 mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass stop cock Cera/Hindware/Jaquar or equivalent of standard design and of approved make conforming to IS:8931. 15 mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass pillar tap Cera/Hindware/Jaquar or equivalent with capastan head 15mm (Fifteen millimetre) dia metre . including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing Chromium plated brass soap dish of KIGSTON / PARKO/ TECHNO / JAL JAQUR/GEM / ESS / SEIKO with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws :- 600mm x 20mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing brass ball valve (horizontal plunger type)-: 15mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level :- 1000 litres net capacity tank including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC floor trap D-plast or equivalent make approved by the Bureau of Indian Standard of self cleaning design including fixing with approved adhesive etc. complete . including cost of cutting making good in the walls and floors complete . 110x90 mm (One hundered ten into ninety millimetre) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing P.V.C connection with brass unions :-300/450mm length :-15mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm dia. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75 mm dia. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm dia.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 75 mm dia.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. 110 mm dia.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. 75 mm dia.including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm dia. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm dia. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Constructing manhole with R.C.C top slab in 1:2:4 mix in (One cement : Two sand : Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) with cement contents not less then 320 kg (Three hundred twenty kilogramme) foundation concrete1:4:8 (One cement : Four sand : Eight graded crushed stone aggregate 40mm (Foerty millimeter) nominal size with cement contents not less then 170 kg (One hundred seventy kilograme) inside plastering 15mm (Fifteen millimeter)thick with cement mortar 1:3 (One cement Three sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (One cement : two sand : Four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size with cement contents not less then 320 kg (Three hundred twenty kilogramme) finished smooth complete including curing and testing.Inside size 800mm x 800mm and 500mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement :4 coarse sand ) with precast R.C.C. verticalgrating complete as per standard design :including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing brass ball valve (horizontal plunger type)-: 15mm nominal bore including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively i/c urinal basin with 5 lit. automatic flushing cistern including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing Division Plate for urinal 600x300 vetreous china including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Bhaw Singh Chauhan (BID ID -573799)

RAM LAL (BID ID -573868)