Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.7 L+₹1.3 L (6.60%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹23.4 L+₹3.0 L (14.6%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹23.6 L+₹3.2 L (15.6%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹26.9 L+₹6.5 L (32.1%)Rejected-Finance BARIYAWAN BARIYAWAN BARIYAWAN BARIYAWAN AMBEDKAR NAGAR UTTAR PRADESH 224210 | AMBEDKAR NAGAR | UTTAR PRADESH | 224210 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹35.1 L
EMD Value
₹70,200
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
PROVN OF 158 X GEYSERS AGAINST INITIAL DEFICIENCY IN BLOCK NO.P-01, P-02, P-03, P-04 AND P-05 (JCOs BLOCK) AT OTM ACCN IN IHQ OF MOD (ARMY) CAMP AND CERTAIN MINOR WORKS UNDER AGE E/M AND AGE B/R-II OF GE (SOUTH) DELHI CANTT-10
2023_MES_608746_1
GE/DS-51/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹70,200
Yes
26 Sept 2023
12 Jul 2023
11 Aug 2023
12 Jul 2023
9 Aug 2023
26 Jul 2023
Amount
M&L for point wiring complete, stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable surface PVC conduit/casing caping and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 4 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes for One 3 pin socket outlet, 15 amps on independent board with cable 4 Sqmm for main current and 4 sqmm as earth wire as power point complete all as specified and as directed. Note:- 1. The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete.
S&F of Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and as directed.
S&F of Switch modular type 2M, 16 Amp with light indicator complete all as specified and as directed. Note:-Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom and socket outlet shall be provided near the geyser and will be measured as 16 Amps power point wiring against item No.1 (a) here-in-before.
S&F water storage heater 25 ltr capacity, 5 Star rated , vertical type, AC, electric, 230 volt, complete with heating element, thermostat, 3 core lead, plug top, safety valve, non Return Valve, temperature indicator and including electric and water connection using MS Iron suitable nuts, bolts and washers for fixing of geyser and making good to disturbed surfaces complete all as specified and as directed.
S&F PVC connection with brass nipple 15 mm x 600 mm long, stainless steel with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and as directed.
S&F 15mm bore pipe medium grade galvlanised iron pipe with all fitting fixed in wall/floor and making connections and making good the disturbed surface to match with the existing specifications complete all as specified and as directed.
S&F bib tap 15mm bore of cast coper alloy CP fancy type scrwed to iron pipe and fixed complete all as specified and as directed.
S&F stopcock concealed Angle type 15mm dia cast copper alloy CP fancy type screwed for iron pipe and fixed complete all as specified and as directed.
M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash including Casing and capping wherever required complete.
All as per Srl item No.9 above, but one 5 pin socket outlet, 5/6 Amps, independent, with cables 1.5 sq. mm size with through concealed PVC/MS conduit.
All as per Srl Item No.9 above, but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing with through concealed PVC/MS conduit.
S&F switch modular type, 1 way 6A, 1module complete all as specified and as directed.
S&F Modular Socket, 6A - 2/3 pin 2module complete all as specified and as directed.
S&F switch modular type 1way 16A, 1module complete all as specified and as directed.
S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.
S&F ceiling rose surface Bakelite 65x25 mm two to three terminals complete all as specified and as directed.
S&F stepped type electronic fan regulator modular type, 120W 2 module complete all as specified and as directed.
S&F Recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for False ceiling and getting electrically connected the fitting complete all as specified and as directed.
S&F in repairs decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections complete all as specified and as directed.
S&F LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified and as directed.
S&F BLDC (Brush Less Direct Current) Ceiling Fan 1200 mm Sweep, operated through regulator, not less than 350 RPM having air delivery 215Cum, high air flow with silence operation, with fully copper winded motor & ribbed 3 Nos A/M blades. The BLDC motor fan shall have 100% rust free blades. The fan shall be BEE 5 Star rating and compliant with IS 374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan including taking down old ceiling fan and depositing to MES store yard complete all as specified and as directed.
M&L for submain wiring in PVC insulated FRLSH single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through PVC concealed conduit of required size complete all as specified and as directed. Note:- (a) Two runs of main cable and one run of earth cable all-together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laid including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows& ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws all complete as per architectural drawings and complete all as specified and as directed.
S&F 4mm thick ordinary quality glass, frosted on one side, in square n exc 0.5 Sqm each pane, fixed with aluminium beading in aluminium window/ventilation etc. complete all as specified and as directed.
S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and complete all as specified and as directed.
S&F 18/19mm thick pre laminated PVC moulded solid cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc. complete all as specified and as directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.
S&F CP clip on hinges (Inset) for cabinate boxes/board and other places as required including in repair complete all as specified and as directed .
S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.
S&F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete all as specified and as directed.
S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs/ truss and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified and as directed.
S&F acoustic gypsum perforated board 4 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and as directed.
Cutting holes in brick walls in built in cement mortar or cement lime mortar exc half brick but not exc one brick complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges or landings, steps, cills, sunshades, shelves, lintel etc. and cutting in chases for concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.
M&L for framed work as in doors, gates of angle fe -410 gde E 250 qureed section with gussed plates complete drilled or welded to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed.
M&L for steel work in tubuler trusses including special shaped washer, cleats etc complete using ERW or induction butt welded tubes confirming to IS: 1161-1979 grade st - 240 complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparation of new steel surfaces of any description , not itherwise described, over 10 cm width or girth complete all as specified and as directed.
S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Taking down of shutter of any description exc 1 Sqm and n.exc 2 Sqm complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at the site as per specification, drawing and complete all as specified and as directed.
Surface dressing in soft/loose soil n.exc 15 cm deep complete all as specified and as directed.
M&L for cement concrete 1:4:8, Type D-2, using 40 mm graded stone aggregate, 100 mm thick, as sub-base and similar works complete all as specified and as directed.
M&L for chequered cement concrete tiles 20cmX20cmX25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors,laid over15mm thick screed bed of cement mortar (1:4), complete all as specified and direccted.
M&L for machine pressed precast concrete interlocking paver block any colour, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 50mm laid sand cusion and joints grouted in Cement Mortar 1:4 finished smooth complete all as specified and as directed.
Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in any type of soil complete all as specified and as directed.
M&L for cement concrete 1:4:8, Type D-2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.
Surface excavation not exc 30 cm deep and avaraging 15 cm and getting out soft/loose soil complete all as specified and as directed.
M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in holdfasts, coping on edges etc including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and as directed.
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius in cement mortar 1:4, complete all as specified and as directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of wall/ceiling and applying exterior emulsion paint white or tinted specified as per manufacturer instruction complete all as specified and as directed.
M&L for 15 mm thick Cement Plaster in CM 1:4 on faces of brick/ concrete surface, finished even and smooth without using extra complete all as specified and as directed.
Removing of excavated soil n.exc 50m and depositing where directed at level n.exc 1.5m above the staring point.
Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender
RAJDHANI ENTERPRISES
ACR ENTERPRISES
verma enterprises
m/s VK construction company
M/s Navansh Engineers & Consultants
M/s VINOD KUMAR SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .