SPL REPAIR TO BLDG NO P-71 AND P-212 (SINGLE JCOS LIVING) AND ADDN/ALTN OF SEWAGE LINE FOR ALL COOK HOUSES, OTM ACCN AND MISC RELATED WORKS OF 20 SIKH AT BHAGAT LINE UNDER AGE B/R-III AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. Complete all as specified and directed.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 Complete all as specified and directed.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed.

Brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc Complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm in depth in any position nototherwise specifically provided for. Complete all as specified and directed.

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises Complete all as specified and directed.

M&L for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding on roof finished even and fair without using extra cement.Complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 on roof surfaces with and including water proofing compound, complete all as specified and dirtected.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed.

M&L 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) finished even and smooth, finishing cement concrete surface even and smoothas in sub base using water proofing compound Complete all as specified and directed.

Supply only Integral waterproofing compound Complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. Complete all as specified and directed.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction Complete all as specified and directed.

Supply and fix non skid ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 Complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M & L machine cut kota stone slab, 18-20mm thick as in flooring/steps/cill etc, over 15mm thick cement screed bed in 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and bull nosing for trade of steps etc Complete all as specified and directed.

Taking down cement or lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc Complete all as specified and directed.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair Complete all as specified and directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair Complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh before plastering on ceiling Complete all as specified and directed.

Taking down of chowkhat with shutter (without taking off shutters from the frame) area not exceeding 1.50 sqm each complete all as specified and directed

All as per item No 21.00 here-in-before but area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each Complete all as specified and directed.

M&L for powder coated anodised aluminium sliding window/ventilators three track, glazed and gauged shutter, aluminium grill 50x50mm, aluminium section weighing 0.55 Kg/RM (minimum) including stainless steel wire mesh, necessary joining cleats, glazing clips, rubber packing, with suitable concealed lock/unlock system, minimum size 100mm on each shutters with plate & stainless screws including 5mm thick glass Complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm (suitable for both side shutter) made out of 1.25mm mild steel sheets complete all as specified and directed

S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed

Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed

Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated Complete all as specified and directed.

Supply and fixing for 30mm thick glazed and skeleton shutters of 2nd class hardwood open rebated and prepaired to receive glass or wiremesh etc, (with sash bars), edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed

S&F Flush shutters, 30mm thick particle board core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fixing for 125mm long but hinges heavy duty cold rolled mild steel medium weight Complete all as specified and directed.

Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long Complete all as specified and directed.

Supply and fixing for aluminium alloy anodised sliding door bolt 300mm long with haps staple bolt type and fixing clips of sheet etc Complete all as specified and directed.

Supply and fixing for 200mm long aluminium handles cast type anodized Complete all as specified and directed.

Supply and fixing for 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plateComplete all as specified and directed.

S&F, 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples Complete all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including 03 Nos SS butt hinges 100mm, 02 Nos aluminium tower bolt 150mm in each door Complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) Complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) Complete all as specified and directed.

S&F Brand Facroty Made 20mm thick 100% Solid WPC (Wood polymer Composite) plain Board of reqired size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate/Kitchen cupboard, etc including 35mm necessary frame, SS 100mm auto hinges(6 Nos), SS fancy type 200mm handle(2 Nos) and magnetic catchure(2 Nos), Complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site. Complete all as specified and directed.

All as per Item No.43.00 here-in-before but 20 mm bore pipe.

S&F 15 mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

All as per Item No 45.00 here-in-before but 20 mm bore pipe.

S&F, 16 mm (outer dia), 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed.

S&F triple layer 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical, vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes, 20mm dia gate valve, etc and incl dismantling water tanks & removing Complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule Complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule Complete all as specified and directed.

Supply & fix in repair brass chromium plated wall mixer suitable for both telephonic shower and overhead shower with long bend pipe Complete all as specified and directed.

S&F in repairs 15 mm bore brass chromium plated bib cock, two in one with angle cock, including fixing to pipe or union complete all as specified and directed.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes Complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts Complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 55 cm long between flanges. Complete all as specified and directed.

S&F S/S 3mm thick soap dish/plate of size 300 x 100mm, with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets Complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including plastic water closet seat white/black, connection to out going pipe and flushing pipe Complete all as specified and directed.

S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device Complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor Complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets Complete all as specified and directed.

S&F in repair transparent 10mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc. Complete all as specified and directed.

S&F in repair PTMT shelf, of size 600 x 120mm, 5-6 mm thick complete fixed with bracings/brackets and screws etc. Complete all as specified and directed.

S&F PVC mirror cabinet of aprooved make, white/coloured with Modiguard/saintgobin mirror size 12cm depth, 31cm width, 54cm height complete all as specifeid and directed.

S&F, structural steel work as stairs (framed) including stringers, treades, landing, balusters, hand rails including cleats, brackets, etc.Complete all as specified and directed.

S&F structural steel work as in roof truss/purlin/rafter/post or simillar work, made of tubular/angular(equal / unequal angles / ISMB section/plates as per site requirement) including welding, special shaped washers etc. using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, Fe 410-W (Gde-E-250) quality A without any attachment complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base Complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand Complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finished even and smooth without using extra cement as in plinth protection Complete all as specified and directed.

Preparation of plastered or unplastered surfaces including scraping/removing of existing/old treatment of wall, applying 2mm thick wall care putty, making the surface smooth and applying two coat of oil emulsion distemper using roller Complete all as specified and directed.

All as per Item No.75.00 here-in-before but as in ceiling, soffit, etc

M&L applying two coats of exterior emulson paint (weather proof) on plastered or unplastered surfaces, using roller over and including applying 2mm thick putty after preparation & scraping the wall surfaces complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n. exc. 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing Complete all as specified and directed.

M&L for TMT steel bars 10mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed

M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L, 75mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall in waste pipes and rain water pipes Complete all as specified and directed.

All as per Item No 84.00 here-in-before but 75mm dia bore pipe

Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Suply and fix in repair 110mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fixing for 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil Complete all as specified and directed.

M&L Cement concrete Type B2 1:2:4 (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) Complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil.Complete all as specified and directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point.complete all as specified and directed.

M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank set in cement mortar 1:6 including necessary form work, placing in desired placing and demolition and breaking of old cover slabs complete all as specified and directed.

M&L for dismantling/taking down old dilaped/broken RCC chajja, facia, dropwall, roof projection, shelf/rack etc and repairing/re-casting of the same with reinforced cement concrete type B1,1:2:4(20mm graded stone aggregate), including necessary formwork, scaffolding and TMT steel reinforcement if required, upto four storeys and making surface smooth and finish with PCC type B0, 1:2:4(using 12.5mm graded aggregate) as in fillet, rendering 5mm thick in cm 1:3 on soffit with drip course and 10mm thick rendering in cm 1:4 for concrete surface with WPC after strucking off formwork, area not exc 2.0 Sqm each, including removal of deberies from the site and disposed out side the the MD land, complete all as specified and directed. Note-: Steel reinforcement whenever used will be measured and paid separately under respective items)

Excavating in trenches, n exc 1.5 m wide and exc 3.0 m and n. exc. 4.50m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil complete all as specified and directed.

Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed.

M & L Concrete in 1:3:6 Type C-2 (using 40mm graded stone aggragate) bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe complete all as specified and directed.

M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M & L Concrete in 1:3:6 Type C-2 (using 40mm graded stone aggragate) bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 200mm dia pipe complete all as specified and directed.

M & L 200mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

Excavating over areas, not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass, type D-2 1:4:8 using (40 mm graded stone agg) complete all as specified and directed.

M&L, Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works in cm (1:4), complete all as specified and directed.

M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L, Cement concrete, type B-2 1:2:4 using (40 mm graded stone agg) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S&F, 110mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 100 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M&L, 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L, 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment of approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. laid as per required colour & pattern over compacted bed of coarse sand, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0m dia 3.0m deep complete all as specified in drg No TD 309 Sheet No 1/4 to 4/4 and as directed by engr-in-charge.

M & L Septic tanks for 150 users excavation in ordinary soil, foundation in PCC 1:2:4, type B-1 brick work in CM 1:4 RCC M-25 slab covers including RCC precast manhole cover having 6 mm plate embedded all round / fibre reinforced cover with iron frame Vent shaft and sludgechambers etc, complete all as specified in drg No TD-217 sheet 1/7 to 7/7 and as directed by engr -in-charge

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site .

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/Bell/street light point controlled by one, one way switch 05 / 06 Amps.

All as item No 126.00 here -in-before but one ceiling fan/Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as item No 126.00 here -in-before but with 1.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as item No 126.00 here -in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as item No 126.00 here -in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

Supply and fixing steped type electronic fan regulator compatible for BLDC fans flush type AC, 230 volts, complete all as specified and directed.

Supply & fixing Call bell push button switch piano/ flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing Call bell, AC 230 Volts single pole complete all as specified and directed.

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting including lamp 9 watt all as specified and directed by Engr-in-Charge

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with including MCCB 4 pole 100 Amps 16 KA, 415 volt and 12 Nos MCB SP 63 Amps inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Supply and fix MCB DB double door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels SPN 8 way , incomer and SP MCB as out going complete all as specified and directed.

Supply & fixing MCB SPN, AC, 240 volts of 63 Amps, C curve, 10 kA, complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Material and labour for sub main wiring with 04Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x4 sq mm wire and one 4.0 sq mm earth shall be measured as one unit length.

Material & labour for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5m below ground level connection to GI wire 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including excavation and earth work and disposal of surplus soil including 15mm GI tubing medium grade and necessary fitting for protection of GI wire including laying charcoal dust and common salt PCC (1:2:3) type C-1 using 20 mm graded stone aggregate earth pit with40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe light grade for waterning and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2022) and connected to earth test including testing complete all as specified and directed. Note: - (i) if the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15 mm dia GI pipe medium grade upto 7.5 m is including in the rate quoted for this item.

Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4.0 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply / laying and fixing 50mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified and directed.

Supply and fixing new ceiling fans complete with blades, down rods and ccessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC.) complete all as specified and directed. Note:- Old unserviceable ceiling fan shall be deposited at MES store yard.

Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) , thickness not less than 1.5mm capacity of water not less than 70 Ltr , 1440 RPM with copper winding and power consumption not more than 240 watt, 50 Hz complete all as specified and directed.

Supply and fixing new exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed. Note:- Old unsv exhaust fan shall be deposited at MES store yard.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified and directed.

A.V. ASSOCIATES (BID ID -3477921)