PROVN OF GARDEN LIGHT FITTINGS FOR CGOM, P28 P29 P30 BLDG AND SOLAR LED LIGHT FOR MAIN GATE AT CG ENCLAVE AND ELECTRICAL WATER HEATER (GEYSER) FOR TYPE -II MD ACCN AT TRV AND HIGH MAST LIGHTS AT CGRA MANGOOR HILLS AND SECURITY SEARCH LIGHTS FOR WAT

Amount

SCH A PART -I : PROVN OF GARDEN LIGHT FITTINGW FOR CGOM, P-28, P-29 & P-30 S&F LED light fitting including bulb bollard 9W in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection complete all as specified and directed

M & L sub main wiring with two runs of single core 4 Sqmm FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & incl steel conduit of suitable size with all accessories such as Tees, elbows,couplings, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directedall as specified and directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of steel conduit shall be measured as one unit)

S&F Junction box dia 200 x 140 x 95mm fixed on pole including MCB 6 Amps SP 01 no with clamp, nut & bolt and connections etc complete all as specified and directed

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed

S&F post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp all as specified and directed

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection. all as specified and directed

SCH A PART -II : PROVN OF ELECTRIC WATER HEATER (GEYSER) FOR TYPE-II MD ACCN AT TRV CHICOLNA S&F electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. etc complete all as specified and directed. (Note : Manufacturere warrantte certificate is required to submitted to Engr -in-charge for claiming payemnt.

SCH A PART -III: PROVN OF HIGHT MAST LIGHTS AT CGRA MANGOOR HILLS Supply, Lay, Testing and commissioning LT UG cable XLPE insulated, armourced heavy duty electric cable, 1100 volts grade with stranded aluminium conductor of size 4 core 16 sqmm all as specified and directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out in soft/disintegrated rock for cable, pole etc.all as specified and directed

Returning, filling in, including spreading , levelling, watering and well ramming in layers not exc 25 cm in soft / disintegrated rock all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Supply and lay fine sand cushion in trenches for cable protection, spreading, levelling,punning and consolidating complete all as specified and directed (Notes : only punned thickness shall be considered for measurement)

Supply and laying un-reinforced precast concrete cable cover class LV, Type 2 flat size 250mm x 150mm x 40mm thick, concrete grade M-20 minimum, all as specified & directed.

Supply and lay GI pipe 50 mm bore light grade as cable protection laid on trench/floor, fixed on pole/wall complete all as specified and directed

Supply, install , testing and commissioning of 12.5 Mtr motorised High mast shaft in two sections made from H.T steel of grade BSEN10025,S355JO , internally and externally hot dip galvanised with average 70 microns, designed for 180 KM/Hr wind speed, comprising of raising and lowering system, 6mm dia steel wire rope, head frame , luminaires carriage suitable to install 8 Nos luminaires in symmetrical arrangement , trailing cable , connector, integral power tool motor, potted driver with ROHS compliance 08 Nos 150 watts LED flood light , power factor >0.95, each LED made of individual peanut lenses and 4mm thick toughened glass for uniform distribution all as specified( including foundation bolts & nuts etc as per manufacturer recommendation complete all as specified and directed.(Work shall be executed through OEM) Note :- (i) Construction of suitable shallow foundation with M-30 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/Sqm. At 2x2 mtr. Depth with all materials and labour charges. (ii) Erection of 12.5 m high mast with all accessories with the help of suitable equipments or with the help of modern engineering practices. (iii) Supply and erection of LED aviation obstruction light luminair (iv) Supplying and fixing double door MS feeder piller box with near the high mast tower. (v) Providing the following component (switching accessories), inside the fidder piller including internal wiring all. Complete for automatic, timely OFF/ON for operating of ( 8 Nos) 150 LED light fitting :- (a) 63A 4 pole MCB isolater 1 No. (b) 240 V contractor - 1 No. (c) Day dial timer (GIC)-1 No.

(d) By pass switch - 1 No. (e) Outlet Terminal - 2 Nos (incoming and outgoing cables including necessary PCC of suitale size for complete. (f) Starter for motor operation (Forward and Reverse direction)- 1 No (vi) Supply of LED flood light fixture 150 well - 08 Nos (vii) An adequate door opeining shall be provided at the base of the mast. The opening is such that it permits clear access to equipments like winch, cable, wire rope, plug & socket etc and also facilities easy removal of the winch for servicing. The door opening is complete with a close fitting vandal resistant allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so that the mast section at the base is unaffected, and undue buckling of the cut portion is prevented under heavy wind condition. (viii) Mast structure is designed to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds) which is measured at a height of 10 mtrs above ground level. MAKE : BAJAJ Model No. BMRLMW 12.5 or similar in makes as mentioned in list of make of particular speciifacation

M&L for earthing using GI earth strip of size 32mm x 6mm complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including earth strip pf size 32mmx6mm to the extend 7.5 mtr as earth lead by means of Gi bolts, nuts and washers eetc with provision of charcoal and salt all as per electrical plate No 3 of SSR part I including water arrangement with Gi pipe 20mm dia , earth lead protection pipe 40mm dia with bends, elbow etc from earth plate to test point , excavation and earth work in soft / disintegerated rock, returning, filling in,ramming and removing of surplus stock to distance not exc 50 mtr , making good to match with existing surface and making PCC pit ( earth chamber) having internal sixe 30cmx30cmx30cm and outer size 60cmx60cmx60cm with reinforced cover 50mm thick and testing on complete all as specified and directed.

SCH A PART -IV : PROVN OF SECURITY SEARCH LIGHTS FOR WATCH TOWER AT 39.37 ACRES CHICOLNA, GOA Supply, installation, testing of high power, auto-swivel LED search light, long rang-800 meter, multi -fuctional , 1x300W multi-cuircuit LED, Efficacy > 140 Im/w, CCT 5500K, LM6 housing with heat sink, round in shape, dia >440mm, operating votage: 90V - 30V, 50hz, PF>0.95, THD<10%, CCT: 5500K, CRI > 70, Optics used - PMMA/PC lens, narrow bean 7 degree, average lux level at 10meter > 9000 with circle of approx 1 meter, toughended clear glass with silicon gasket, over volt / under volt & short circuit potected, confirming to LM79, LM80, IK07, IP66, lux report , Type tested as per IS:10322, IS:15885, and B.I.S. certified. This search - light should be installed on rotating disc of revolving mechanism with suitable motor- gear unit designer to rotate 360 degree continuously over the night in horizontal Plane and tiltable upto 45 degree. A separate wall mounted wire control panel (1 to 10rpm ), Auto / manual , reverse / forward, up / down through the various push bottons for operation remotely . The revolving mechnism is fully covered with weather and rust proof die cast fiber box with maintance window and side doors, provision of foundation holes at bottom for proper installation,all as specified and directed

SCH A PART -V PROVN OF SOLAR LED LIGHT FITTINGS FOR MAINT GATE AT CG ENCLAVE S & F Fabrication, errection testing complete Hot dip galvanized IRON octagonal pole 7 metre long with Single arm bracket of size 1 mtr. with 40 mm dia of GI pipe and 15 degree arm tilt suitable for wind speed up to 47 m/s, junction box. Dimension top 70mm and bottom 130 mm, 3mm thickness, base plate 200 x 200 x12 mm as per BSEN ISO 146, with foundation bolts of M 20 x 650mm 'J' EN8 grade bolt with nut and washer with MS template & projected bolt length 100 mm all as specified. Including finial and necessary Civil works like RCC/ PCC foundation earthwork etc complete Including taking down existing RCC pole and refix the LED street light fittings on new pole complete all as specified and directed. Make : Bajaj Pole type BOP-7030 or similar make are mentioned in list of make of particular Specification. (i) Welding Standard:- IS:10178:1995/ IS 9535:1996. (ii) Design:- As per IS 875 Part-3:2015, IS:800:2007/IS 6533:1989(P-2) /BS 5649:1985/EN 40 (iii) Galvanization Standard:- As per 4759:1996/IS:2629:1985/BSEN, ISO:1461:2009. (iv) CIVIL WORK IN FDN:(i) Design & drawing of foundation / pole shall be submitted from manufacturer for approval of Engineer-in-charge. (ii)Cost of all civil wks/ fdn wks for fixing poles shall deem to be included in this item rate quoted by bidders, No extra cost in this regard shall be entertained in future.

Supply and fix Solar LED light fitting of 50W all in one with Hybrid comprising of smart integrated solar street light with built in mono crystalline panel, Lithium Ferro Phospate battery, MPPT charge controller and PIR sensor with colour temperature 6000-6500K all as specified and directed by Engr-in Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 2 core. all as specified and directed

Tiwarinassociates

metro electrical services

Shree Ram Enterprises

SHIVANI ENTERPRISES

Bharat Sales Corporation

BROTECH

M/S P S BABU

Shine Enterprises

NATIONAL ENGINEERING CORPORATION

M/S SOMANATH ENTERPRISES