SPECIAL REPAIR TO BLDG NO BT-03 OF HQ 101 AREA ( EST) INCLUDING CERTAIN SANCTIONED WORKS AT SHILLONG UNDER GE SHILLONG.

Amount

Dismantling plain or corrugated steel sheeting any guage thickness roof covering etc complete all as specified and directed.

Dismantling boarding of any description and fixed any position with nails etc complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position framed work etc complete all as specified and as directed.

Taking down chowkats or frames size exc. 1.5 Sqm but n. exc. 4 Sqm each (without taking off shutters from the frame) including all builders hardware and removing from site etc complete all as specified and as directed.

Taking down chowkats or frames size n. exc. 1.5 Sqm each (without taking off shutters from the frame) with all builders hardware and removing from site etc complete all as specified and as directed.

Taking down shutters of any description size n. exc. 1 Sqm each and resecuring or easing & adjusting refixing in same opening etc complete all as specified and as directed.

Taking down shutters of any description size exc. 1 Sqm but n.exc 2 sqm each and resecuring or easing & adjusting refixing in same opening etc complete all as specified and as directed.

Taking down shutters of any description size exc. 1 Sqm but n.exc 2 sqm each with all builders hardware and removing from site etc complete all as specified and as directed.

Taking down shutters of any description size n. exc. 1 Sqm each with all builders hardware and removing from site etc complete all as specified and as directed.

Demolition of brickwork / precast concrete block walling built in cement mortar and removing rubbish from site etc complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for,etc complete all as specified and as directed.

Dismantling wall / ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises etc complete all as specified and as directed by Engineer-in- Charge.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings etc complete all as specified and as directed.

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings etc complete all as specified and as directed.

M&L for 12 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work etc complete all as specified and as directed.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work etc complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets square rectangular or tringular in section clean sawn on one face or edge in section wrought secured with nails or brads sectional area exc 13 Sqcm but n.exc 25 Sqcm complete all as specified and as directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating125 gram per sqm , fixed with L-type or J-type or cranked hook bolts etc complete all as specified and as directed.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 125 gram per sqm etc complete all as specified and as directed.

M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats creosote oil complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each etc complete all as specified and as directed.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed..

M&L for plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggrgate ) as in anchorage block for fixing holdfast etc complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veenered type on both sides etc complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F in repair Sheet glass, ordinary quality 3.00 mm thick and glazing with oil putty in square not exceeding 0.50 sqm in each pane etc complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F Brass 300 mm long, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed.

S&F 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F 100 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and as directed.

S&F 100 mm size extruded Brass handles, fabricated type, polished bright etc complete all as specified and as directed.

S&F 150 mm sextruded Brass handles, fabricated type, polished bright etc complete all as specified and as directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 100 mm size ISI Marked type B-11 etc complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75 mm size ISI Marked type B-12 etc complete all as specified and directed.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including necessary joining cleat, hinges for fixing etc. complete all as speicified .

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, powder coating (minimum thickness of powder powder coating 50 micron), fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 ,100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed.

S&F Sheet glass, ordinary quality 4.80 mm thick and glazing with oil putty in square exceeding 0.50 sqm in each pane and fixed to aluminium frame etc complete all as specified and as directed.

S&F frosted sheet glass, ordinary quality 4.80 mm thick and glazing with oil putty in square exceeding 0.50 sqm in each pane and fixed to aluminium frame etc complete all as specified and as directed.

M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet / cup-board and similar works fixed with screws to timber frame works etc completed all as specified and directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 etc complete all as specified and directed.

M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, 10 Cm width and setting in cement sand mortar 1:4 etc complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg / Sqm including cleaning of surfaces etc complete all as specified and directed

M&L for PCC (1:4:8) type D-2(using 40mm gr aggregate) as in foundation , filling and mass concrete etc complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface etc complete all as specified and directed

M&L for 2nd class hardwood, 40 mm thick boarding, planed one side with butt joints fixed with nails etc complete all as specified and directed.

Labour only for fixing 2nd class hardwood, 40 mm thick boarding, planed one side with butt joints fixed with new nails etc complete all as specified and directed. Note:- Old serviceable 2nd class hardwood boarding obtained after dismantling against relevant item shall be re-used under this item. Bidders to quote their rate only for labour and nails .

M&L for dark shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cement sand mortar 1:6 etc complete all as specified and as directed

All as per above item No 52.00 here in above but as in vertical surfaces of wall such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:4) etc complete all as specified and as directed.

M&L for Non-skid ceramic white tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 etc complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 300mm x 450mm x 7mm or 300mm x 600mm x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 etc complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) slab (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc including dismantling the existing slab complete all as specified and as directed.

Labour only for Chamfer, splays or arris in facework of Granite n. exc 15mm wide etc complete all as specified and as directed..

M&L for Precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as inlandings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in cement sand mortar (1:4) including necessary formwork etc complete all as specified and directed.

M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved liquid Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base coat including finishing the surface even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked.complete all as specified and as directed.

M&L for Rendering, 10 mm thick plaster in cement sand mortar 1:6 including finishing the plastered surfaces even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work for false ceiling comprising of aluminium perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using GI wire of 6mm thickness .GI frame will be 60 x 60 cm to recieve building board in ceiling etc complete all as specified and as directed .

M&L for 4mm thick E-Board 600 mm x 600 mm pre-painted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction etc complete all as specified and as directed.

M&L for Gypsum ceiling board 12 mm thick fixed with screws to GI or aluminium frame work including two coats of putty and two coats of oil bound distemper including GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasterners with and including ceiling section (n.exc 1.20 m length) 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm C/c etc complete all as specified and as directed.

S&F in repairs Vitreous China EWC including PVC seat cover closed pattern single piece size 755 x 365 x 655 etc complete all as specified and as directed. Make :- Jaquar Cat Part No :- LYS-WHT-38851PSM or equivalent in make Cera / Parryware / Hindware.

S&F in repairs Vitreous China urinal with all necessary fixing accessories etc complete all as specified and as directed.Make :-Jaquar Cat Part No :- URS-WHT-132530 or equivalent make in Parryware/ Hindware /Prayag

S & F in repairs curved shaped Urinal Partition with frosted glass 10 mm thick of chrome finish brackets etc complete all as specified and as directed.Make :- Jaquar Cat Par No:JSE-CHR-110UC450X or equivalent make in Cera / Hindware /Parryware /Prayag

S&F Metropole flush valve regular 40 mm size (concealed body) with exposed shut off provision & round flange etc complete all as specified and as directed. Make :- Jaquar Cat part No:- FLV-1093N or equivalent make in Parryware / Hindware / Cera / Prayag.

S&F in repairs Vitreous China Clay table top wash hand basin (WHB) of size 635 x 430 x 190 mm including waste coupling etc complete all as specified and as directed.Make :- Jaquar Cat Part No:-ARS-WHT-39601 and waste coupling Cat Part No:-ALD-727 or equivalent make in Hindware / Cera / Parryware / Prayag.

S&F in repairs Vitreous China clay table top wash hand basin (WHB) of size 700x435x135 mm including waste coupling etc complete all as specified and as directed. Make Jaquar Cat Part No:-ARS-WHT-39903 and waste coupling Cat Part No:- ALD-727 or equivalent make in Hindware / Cera / Parryware/ Prayag.

S&F CP angular Stop valve ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe with or without lettered 'HOT' or 'COLD' etc complete all as specified and as directed. . Make:- Prayag / Sona / Hindware.

S&F Brass CP 2-in-1 Bib cock with flange etc complete all as specifed and as directed .Make Jaquar Cat Part No:-ORP-10041PM or equivalent make in Marc / Cera / Parryware / Prayag.

S&F CP single lever basin mixer without popup waste with 450mm long braided hoses, fancy type etc complete all as specified and as directed . Make :- Jaquar Cat Part No:- KUP-35051BPM or equivalent make in Marc / Parryware / Prayag.

S&F 15 mm bore CP health Faucet cock with Flexible PVC pipe 1 m long etc complete all as specified and as directed.Make Jaquar Cat part no:ALD-565 or equivalent make in Marc/Parryware/Prayag.

S&F Soap dish holder chromium plated fixed on wall with CP screws etc complete all as specified and as directed. Make :- Jaquar Cat Part No:-AKP-35731P or equivalent make in Marc/Parryware/Prayag

S&F Toilet roll holder chromium plated with stainless steel flap fixed to wall with CP screws etc complete all as specified and as directed. Make :- Jaguar Cat Part No:- AKP-35753PS or equivalent make in Marc / Parryware / Prayag.

S&F Towel ring square shape stainless steel fixed to wall with CP screws etc complete all as specified and as directed. Make :-Jaquar Cat Part No:-AKP-35721P or equivalent make in Marc / Parryware / Prayag.

S&F Corner glass shelf assembly with CP bracket etc complete all as specified and as directed. Make Jaquar Cat Part No:CAN-1173 or equivalent make in Marc / Parryware / Prayag .

S&F Exposed park kit single lever Basin mixer wall mounted consisting of operating lever , wall flange nipple and spout complete all as specified and as directed. Make Jaquar Cat Part No:- KUP-35233KPM or equivalent make in Marc / Parryware / Prayag .

S&F in repair Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing union and cap etc complete all as specified and as directed.

M&L for PVC (SWR) floor trap ,75mm outlet dia , plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed .Make:- Prince / Supreme.

S&F 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and as directed .Make:- Prince / Supreme.

S&F 110 mm bore PVC (SWR) bend of any radius complete all as specified and directed.Make:- Prince / Supreme.

S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed.Make:- Prince / Supreme.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.Make:- Prince / Supreme.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and as directed.

S&F PVC Connections 15mm size with PTMT nuts of length 450mm and fixed, complete all as specified and as directed.

S&F GI water tubing 15 mm dia medium grade with all necessary GI fittings ,fixed in wall, ceiling or floor with necessary clamp or hook etc complete all as specified and as directed.

S&F GI water tubing 20 mm dia medium grade with all necessary GI fittings ,fixed in wall, ceiling or floor with necessary clamp or hook etc complete all as specified and as directed.

Cutting chases, pinning in concrete block or slab wall ,making good to facing where required and pointing in cement sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth etc complete all as specified and as directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces exc. 10 Cm width or girth including preparation of wooden surfaces complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two finishing coats of oil bound distemper over and including 1 mm thick layer of wall care putty chalk whitening etc complete all as specified and as directed.

M&L for French polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface and applying a coat of wood filler on new works with two coats of polish etc complete all as specified and as directed

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour etc complete all as specified and as directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt , 250 mm long ,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F Aluminium tower bolt 150 mm long, anodised barrel tower bolts of extruded section etc complete all as specified and as directed.

S&F Aluminium tower bolt 100 mm long, anodised barrel tower bolts of extruded section etc complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm X 47 mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, etc complete all as specified and as directed .

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6 ) type C -2 ( using 40 mm graded stone aggregate as in Plinth protection and similar works , finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in sub floor etc finishes concrete surface even & rough without using extra cement including necessary formwork etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded stone aggrgate ) 25 mm thick as in sub floor finished even and rough without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 etc complete all as specified and as directed.

All as per above item No 108.00 here in above but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:4) etc complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement sand screed bed 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete etc complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.410 or Fe-310.Gde-E-165 complete all as specified and as directed

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm ,white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag cat part no. 4055 or equivalent make of Parryware / Hindware.

S&F in repair PVC (Plastic polymer flushing Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 503 or equivalent make of Parryware / Hindware.

S&F in repair Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVC water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, flushing pipe, fixing bolt for pedestal pattern and making good to disturbed surfaces of floor etc complete all as specfied and directed. Make:- Prayag cat part no.4022 or equivalent make of Parryware / Hindware.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) bue including spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) complete all as specified and as directed .Make:- Prayag cat part no. 4998 or equivalent make of Parryware / Hindware.

S&F in repair Tubular Towel rail , D type 60 cm long brass between flanges ,Chromium plated etc complete all as specified and as directed.Make:- Prayag / Parryware / Hindware.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 4645 IRIS or equivalent make of Pearl/ Hindware.

S&F in repairs CP angular Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Prayag Cat part No.8010 or equivalent model from make Sona / Hindware.

S&F in repair Pillar tap,15 mm bore, brass chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, fancy type screwed for iron pipe complete all as specified and directed by Engr-in-Charge Make:- Prayag cat part no.7602 or equivalent make Hindware / Sona.

S&F 15mm bore CP wall mixer 3-in-1 system with provn for bath hand shower and overhead shower complete with 115mm long bend pipe , connecting Legs & wall flange (without hand & overhead shower) complete all as specified and as directed . Make - Jaquar/ Prayag / Sona / Hindware.

S&F in repair CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.7606 or equivalent model from make Sona / Hindware.

S&F Sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed to wall with CP screws etc complete all as specified and as directed. Make- Prayag /Parryware / Hindware

S&F 20 mm bore gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. . Make:- Prayag / Zoloto / Upadhaya / BIR..

M&L for preparation of old or previously treated wooden surfaces exc. 10 Cm width or girth and applying a coat of Synthetic enamel paint including preparation of wooden surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall including cornices, pilasters etc and applying one finishing coat of oil bound distemper over and including a coat of wall primer and a thin layer of wall care putty chalk whitening and including necessary preparation of surfaces etc complete all as specified and as directed.

M&L for complete removal of existing treatment of wall including cornices, pilasters etc and applying one finishing coat of cement base paint over and including a coat of wall primer including necessary preparation of surfaces etc complete all as specified and as directed.

M&L for Preparation surfaces of wood and wood based materials,steel and iron work, new or old,of any description and girth,not otherwise described, and treating small articles such as stop,covers,gully,gratings,holdfasts, ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n.exc 0.5 sqm each etc complete all as specified and as directed.

S&F in repair decorative drapery curtain rod of wooden finish of 20 mm dia including CP brackets or end support or bracket for fixing of rod etc complete all as specified and as directed.

S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, factory made, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 300 mm long, Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed

S&F Mild Steel tower bolts stove enameled black, bright bolt , 150 mm length etc complete all as specified and as directed.

S&F Mild Steel tower bolts stove enameled black, bright bolt , 100 mm length etc complete all as specified and as directed.

S&F Mild steel pressed handles, oval type, stove enamelled black, 100 mm size etc complete all as specified and as directed.

S&F Mild steel pressed handles, oval type, stove enamelled black, 150 mm size etc complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.

Rough excavation not exceeding 1.50 m deep and getting out soft / loose soil etc complete all as specified and as directed.

Removing excavated materials (soil) exc 500 m and n.exc 1.50 km from starting point and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M&L for Earth filling ( fresh excavated soil ) under floor including spreading , levelling in layer n.exc 25 cm thick including well ramming and watering etc complete all as directed.

M&L for 75 mm thick hard core of brocken stone or boulders of gauge not exceeding 63 mm , deposited spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface etc complete all as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub floor , finished even and rough without using extra cement etc complete all as specified and as directed.

E&M WORKS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc , removing material to store for keeping in safe custody for reuse at site and making good to disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed by Engineer -in -Charge .

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories,cassing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) .Make of cable:- KEI / RR Kabel / Havells . PVC Casing & Capping:- Prestoplast / Finolex / Kalinga

All as per item No 142.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as directed by Engineer -in -Charge .Make of cable :- KEI / Finolex / Havells and Make of PVC casing & capping :- Prestoplast / Kalinga / Finolex.

All as per item No 142.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge .

All as per Item No. 142.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.Make of cable :- KEI / Finolex / Havells and Make of PVC casing & capping :- Prestoplast / Kalinga / Finolex.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5/6 Amps complete all as specified and directed.

Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5/6 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix Switch socket combination (ISI marked), 2/3 pin and 15/16 Amps, flush type, 240 volts complete all as specified and as directed.

S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

S&F Decorative wall mounted LED batten fittings with all accessories, 1X18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make Havells Cat part No. LHEXBQP71N1W018 or Make:- CROMPTON Cat Part No. LCTL 18 CDL.or Philips cat part no. DX UJJWAL.

S&F in repair decorative wall mounted LED batten fittings with all accessories, 1X18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make Havells Cat part No. LHEXBQP71N1W018 or Make:- CROMPTON Cat Part No. LCTL 18 CDL.or Philips cat part no. DX UJJWAL.

S&F in repair decorative wall mounted LED batten fittings with all accessories, 1X 9 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed Make :- Crompton Cat part No. LCTL-9-CDL or Make:- Havells Cat part No. LHEXBQP7IN1W009.

S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and as directed.

Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCCB 100 Amps 4 Pole 25 KA as incommer complete all as specified and as directed. (Make:- Hager as per cat No :VYT04DD or equivalent make as Seimens /Legrand . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Schnieder/GE/C&S.

Supply and fix in repair MCCB ,four pole , 240 Volt, 100 Amps,16 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.Make: Havells Cat part No - IHLGHF0100 or equivalent in Schnieder/GE/C&S.

Supply & fixing Exhaust fan, heavy duty , single phase, AC, 230/240V of 250 mm ( 10'') sweep , including cutting hole ( circular / rectangular ) in brick wall and making good to disturbed surface with Cement sand mortar 1:4) and necessary painting work to match with the existing wall etc complete all as specified and directed. Make:- Havells cat part no. Ventil DX or equivalent make in Bajaj / Philips.

Supply and fixing inrepair LED Building security light 25 watt ,pressure die cast aluminium housing heat resistant glass, IP 65 protection, better optics for uniform distribution complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including suitable size bracket and necessary electric connection etc complete all as specified and as directed.Make:- Bajaj cat part no. 169821 LED or CG cat part no LSTO 25 CDL equivalent make of Philips / Havells.

Supply and fix in repair MCB Distribution board , 240 volts Single pole and neutral ,double door, sheet steel enclosure ,powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge . Make : Make: Havells, Cat Part No:DHDPSHODRW04 or equivalent model from make:- Siemens / Schneider / Legrand / L&T.

Supply and fix in repair MCB DP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make: Havells Cat Part No:DHMCCDPF040 or equivalent model from make:- Schneider / Legrand.

Supply and fix in repair MCB SP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed . Make: Havells Cat Part No DHMGCSPF040 or equivalent model from make:- Schneider / Legrand.

M&L for Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.Make- Cable- Finolex/RR cable/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed.

Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M&L for Sand cushioning with dry clean river sand for protection/covering of under ground cable in trenches complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only shall be measured for payment.

Supply and laying Sub class 'B' well burnt brick, laid flat in trenches as protection to LT XLPE cable complete all as specified and as directed.

Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 35 Sqmm 3.5 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed.

Supply and laying GI tubing light grade,40 mm bore with all fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I etc complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories,concealed on brick or PCC wall / ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) .Make of cable:- KEI / RR Kabel / Havells . PVC Casing & Capping:- Prestoplast / Finolex / Kalinga

All as per item No 168.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge .

All as per Item No. 168.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.Make of cable :- KEI / Finolex / Havells and Make of PVC casing & capping :- Prestoplast / Kalinga / Finolex.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, complete all as specified and directed. Make : Cona / Plaza / Anchor .

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, complete all as specified and directed. Make : Cona / Plaza / Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. Make : Cona / Plaza / Anchor .

Supply and fixing modular sockets 6A & 16A , 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. Make :- Cona / Plaza / Anchor .

Supply and fixing modular white cover plate with frame 1 module ,ISI marked etc complete all as specified and directed.

Supply and fixing modular white cover plate with frame 2 module ,ISI marked etc complete all as specified and directed.

Supply and fixing modular white cover plate with frame 3 module ,ISI marked etc complete all as specified and directed.

Supply and fixing modular white cover plate with frame 4 module ,ISI marked etc complete all as specified and directed.

Supply and fixing modular white cover plate with frame 5 module ,ISI marked etc complete all as specified and directed.

Supply and fixing modular white cover plate with frame 6 module ,ISI marked etc complete all as specified and directed.

S&F in repair mirror wall mounted LED batten fittings with all accessories 1 x 12 watt LED , 6000K, extruded polycarbonate, integrated electronic driver and fixed to wall etc complete all as speficied and directed. Make: Philips Cat No:31403 12-watt LED picture Light ( Gold) or its equivalent of Havells / Bjaja.

S&F Slim design LED light recessed square PLUTO NEO 2X 2, 28 watt flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one etc complete all as specified and as directed.

Supply and fixing in repair bracket for security light made up of 25 mm dia GI pipe 'Light' grade bent to required length , over all length 1.2 meter ,fixed to wall with two GI clamps made of 20 x 3 mm MS flat , 4 nos of bolts with nuts etc complete all as specified and as directed.

Supply, fixing and testing , electrically driven water heater (Geyser) , storage type, BEE 5 star rating , 25 litre capacity , grouting in brick wall with new GI nut & bolts of suitable size including provn of 2 Nos PVC connection 450 mm long suitable for geyser and necessary incoming and outgoing electric and water connections with hot / cold PVC pipes including testing etc complete all as specified and directed. Make: Havells product code GHWCANTWH025 or equivalent to Bajaj / Venus / Racold

M/S T N CONSTRUCTION

M/S BISWA CONSTRUCTION

M/S P.K Nag Choudhury

H K Enterprise

M/S UTTAM SAHA

M/s M.L Consortium

M/s Nishi Kumar Das