Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.2 LAccepted-AOC | ₹19.2 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹20.0 L+₹80,353.75 (4.18%)Rejected-Finance MAIN ROAD BRAIRAJNAGAR JHARSUGUDA | JHARSUGUDA | JHARSUGUDA | ODISHA | 768216 | ₹20.0 L+₹80,353.75 (4.18%) | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹23.2 L+₹4.0 L (20.6%)Rejected-Finance ANANTA OCP JAGANNATH AREA | ANUGUL | ODISHA | 759103 | ₹23.2 L+₹4.0 L (20.6%) | L-3 | Rejected-Finance L-3 |
Tender Value
₹29.0 L
EMD Value
₹36,300
Closing Date
1 Jun 2026, 5:00 pmClosed
STAFF OFFICER CIVIL MCL LAKHANPUR AREA
GM OFFICE MCL LAKHANPUR AREA
Providing and fixing Mosquito net and curtain rod for doors and windows of BTI Hostel and misc. Repair works in kitchen area of BTI Hostel of BIT, Lakhanpur Area
2026_MCL_360002_1
MCL/GM/LKPA/SOC/e-Tender /26-27/22 dt22.05.26
Open Tender
Civil Works - Others
Percentage
60 days
GM OFFICE MCL LAKHANPUR AREA
As per NIT
3 documents required · 3 mandatory
₹36,300
4 Jul 2026
22 May 2026
3 Jun 2026
22 May 2026
1 Jun 2026
22 May 2026
22 May 2026 - 25 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1WITHOUT ITC AVAILABILITY | |||||
| 0.999 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 498.5 | kg | 597.8 | ₹2,98,003.3 |
| 0.000 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 1,631 | kg | 674.55 | ₹11,00,191.05 |
| 0.999 | Providing and fixing stainless steel mosquito proof wire net in alluminium door, window shutter with aluminium section etc complete as per architectural drawings and the directions of Engineer-in-charge (Cost of Alluminium snap beading shall be paid in basic item) with stainless steel wire gauge (Grade 304) aperture 1.4mm in both direction and 0.5mm dia wire. | 224 | Sqm | 1,253.35 | ₹2,80,750.4 |
| 0.000 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred.125x75x4 mm | 156 | each | 146 | ₹22,776 |
| 0.999 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm | 52 | each | 412.2 | ₹21,434.4 |
| 0.000 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper | 52 | each | 74.75 | ₹3,887 |
| 0.999 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | 104 | each | 71.15 | ₹7,399.6 |
| 0.000 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 52 | each | 125.15 | ₹6,507.8 |
| 0.999 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: 25 mm dia | 355 | metre | 192.65 | ₹68,390.75 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.83 MB
Tendernotice_2.pdf
PDF • 2.35 MB
Tendernotice_3.pdf
PDF • 1.33 MB
BOQ_372878.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .