Maintenance of Judicial officers residence in Distt Bijnor

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. As per DSR Vol I Sr. No. 2.10.1.1. (Including labour cess but excluding GST)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR Vol I Sr. No. 4.1.8 (Including labour cess, Royalty but excluding GST)

Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. As per DSR Vol. I Sr. No. 6.1.1. (Including labour cess, Royalty but excluding GST)

Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:4 cement & coarse sand). As per DSR Vol. I Sr. No. 6.4.1. (Including labour cess, Royalty but excluding GST)

12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. As per DSR Vol. II Sr. No. 13.4.1. (Including labour cess, Royalty but excluding GST)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR Vol I Sr. No. 5.3. (Including labour cess, Royalty but excluding GST)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe-500D or more. As per DSR Vol I Sr. No. 5.22.6. (Including labour cess but excluding GST)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As per DSR Vol. 1 Sr. No. 11.3.1. (Including labour cess, Royalty but excluding GST)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. As per DSR Vol. I Sr. No. 10.25.2. (Including labour cess but excluding GST)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. DSR 9.51.1. (Including labour cess but excluding GST)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. As per DSR Vol I Sr. no. 9.1.1. (Including labour cess but excluding GST)

Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR Vol I Sr. No. 9.20.2. (Including labour cess but excluding GST)

Providing and fixing 6 mm thick fiber hard board sheet lining with but jointing and nails (frame work and cover fillets to be measured and paid for seperately) As per Ch. 12 New item No. 1. (Including labour cess but excluding GST)

Supply and fixing of PVC pipe, 6 kg/sqm pressure 10 cm internal dia A.C. down pipe everest of charminar make complete with bands with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls and including supply of 10 cm long 6 mm dia Nuts and bolts including washers of required size. all material labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe. As per Ch. 19 S.I. No. 730A. (Including labour cess but excluding GST)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR Vol II Sr. No. 18.48. (Including labour cess but excluding GST)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm nominal bore. As per DSR Vol. 2 Sr. No. 18.12.1. (Including labour cess but excluding GST)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore. As per DSR Vol. 2 Sr. No. 18.18.2. (Including labour cess but excluding GST)

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. As per DSR Vol. 2 Sr. No. 18.15.1. (Including labour cess but excluding GST)

Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms. As per DSR Vol. 2 Sr. No. 18.56.2. (Including labour cess but excluding GST)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore As per DSR Vol. 2 Sr. No. 18.52.1. (Including labour cess but excluding GST)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore. As per DSR Vol. 2 Sr. No. 18.53.1. (Including labour cess but excluding GST)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. As per DSR Vol II Sr. No. 18.50.1. (Including labour cess but excluding GST)

Brass full way valve with C.I. wheel (screwed end) 25 mm dia. DSR 1927 (Including labour cess but excluding GST)

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore. DSR 18.21.2.1. (Including labour cess but excluding GST)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. As per DSR Vol II Sr. No. 17.2.1. (Including labour cess but excluding GST)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per DSR Vol II Sr. No. 17.1.1. (Including labour cess but excluding GST)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. DSR 17.7A. (Including labour cess but excluding GST)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 17.31. (Including labour cess but excluding GST)

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter. DSR 18.22.2. (Including labour cess but excluding GST)

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. As per DSR Vol II Sr. No. 17.28.2.1. (Including labour cess but excluding GST)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete (10 litre capacity - White). As per DSR Vol II Sr. No. 17.18.1. (Including labour cess but excluding GST)

Please Enable Macros to View BoQ information