REPAIR/ REPLACEMENT OF ELECTRIC METER DISTRIBUTION BOARD, SUB MAIN WIRING AND CONNECTED ITEMS UNDER GE KAMPTEE

Amount

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

All as per item No 5 above but 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

All as per item No 5 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

All as per item No 5 above but 4x 6.0 Sqmm with earth wire of 2x6.0 Sqmm complete all as specified and directed.

S&F in repairs ceiling rose surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F in repairs modular switch one way 6A, 1 module complete all as specified and directed.

S&F in repairs LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired complete all as specified and directed. Make:- Bajaj/ Syska/ Wipro/ Jaquar.

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt 40 to 60 amps 10 KA complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F in repairs energy meter boxes suitable to accommodate single phase energy meter with all connections made of metallic sheet and bakelite window complete all as specified and directed. Make:- Ship/ Hensel/ Sintex.

S&F in repairs electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

All as per item No. 22 above but 3 phase 415 Volts, complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.52,505.00]

Vaidehi E Link

Bidder Name

Paragon Electrotechnics

Vaidehi E Link