Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹5.7 L+₹2,871.82 (0.51%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | KAMLESH ENGINEERING WORKS L1 | SUSHMA ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.01 | S/O Horizontal centrifugal pump for dewatering muddy water, containing sand, silt etc. of capacity 3 HP/2.2 KW having size 65x40 mm, Total Head 10 m, Capacity 18-25 m3/hr, Make – Make: Pump: Kirloskar/M&P/DJB Approved. | 2 | Nos. | 84,506 ₹99,717.08 Lowest | 84,933 ₹1,00,220.94 |
| 1.02 | Energy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motors (IE2 )(Enclosure confirming to protection IP55) Horizontal Foot Mounted Induction Motors, continuously rated suitable for operation on 415V+/-10%, 50Hz+/-5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitude less than 1000M above MSL and confirming to IEC:60034-1 & IS 12615:2018., 3.2.7 Having Motor Rating 3.7Kw/ 5 HP SOR 3.2.7 | 2 | Nos. | 54,450 ₹64,251 Lowest | 54,725 ₹64,575.5 |
| 1.03 | Cutting a keyway on shaft, cut matching key way inside coupling bore and after that fit key snugly, than install coupling of suitable size. | 2 | job | 4,950 ₹5,841 Lowest | 4,975 ₹5,870.5 |
| 1.04 | D) IN DOOR TYPE 5HP
LT Cubical type electrical Panel board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet with horizontal and vertical intermediate chamber of
suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items.
1. MCCB 63 Amp, 4 Pole-1No.
2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically
3. DOL starter of 5HP, 3Phase oil immersed type 1No
4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No
5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No
6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set
7. Shunt capacitor of 5 KVAR with three phase isolator 1No
8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection,
High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No
Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc as required. The panel board shall be mounted on the base frame
of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved.
SOR 3 10.2.4 | 2 | Nos. | 83,262 ₹98,249.16 Lowest | 83,684 ₹98,747.12 |
| 1.05 | S/O GI pipes 50 mm dia size medium class with GI flange welded in both sides 3 Mtrs. Long with MS strips complete with threading work on each side of pipe each flange should be 4 hole and cut for cables. Make: - Jindal / Tata / DJB approved. | 20 | Nos. | 1,02,960 ₹1,21,492.8 Lowest | 1,03,480 ₹1,22,106.4 |
| 1.06 | S/O 50 mm dia DI check valve Make: - Sant/ Zoloto / Leader/ DJB approved SOR 4.3.3 | 2 | Nos. | 12,414 ₹14,648.52 Lowest | 12,477 ₹14,722.86 |
| 1.07 | Supply of neoprene rubber sheet having 50% neoprene, as per required size. Make:- Jyoti/Worth/DJB approved | 40 | Kg. | 19,400 ₹22,892 Lowest | 19,500 ₹23,010 |
| 1.08 | Disconnecting outgoing and incoming connections and cables & marking them properly. Removing connections from earthling strip. | 2 | job | 12,375 ₹14,602.5 Lowest | 12,437.5 ₹14,676.25 |
| 1.09 | Dismantling of old pump after disconnecting from suction and delivery pipe lines, by cutting old rusted nut bolts using gas cutter and manual labor, decoupling with motor,. Job includes shifting of pump sets with base frame to ground level, etc. as reqd. | 2 | Job | 14,850 ₹17,523 Lowest | 14,925 ₹17,611.5 |
| 1.10 | Mark area of foundation to be removed isolate utilities and use PPE while working, breaking foundation using jack hammer and dispose of debris. | 2 | job | 16,236 ₹19,158.48 Lowest | 16,318 ₹19,255.24 |
Tender Value
Refer Docs
EMD Value
₹11,500
Closing Date
30 Jul 2025, 11:15 amClosed
EE ENM M III
Delhi Jal Board C-Block Near Divya Jyoti Apartment, Sector-19 BPS Rohini, Delhi-89
Replacement of Dewatering pump set at Paradise apartment ward no 54 n Rohini D under Rohini Constituency in Rohini AC 13
2025_DJB_275861_23
NIT NO. 09(2025-26) M-III
Open Tender
Miscellaneous Works
Item Rate
30 days
EE ENM M III
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
Account No SB 50448339804
₹11,500
Yes
20 Sept 2025
23 Jul 2025
30 Jul 2025
23 Jul 2025
30 Jul 2025
23 Jul 2025
S/O Horizontal centrifugal pump for dewatering muddy water, containing sand, silt etc. of capacity 3 HP/2.2 KW having size 65x40 mm, Total Head 10 m, Capacity 18-25 m3/hr, Make – Make: Pump: Kirloskar/M&P/DJB Approved.
Energy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Induction Motors (IE2 )(Enclosure confirming to protection IP55) Horizontal Foot Mounted Induction Motors, continuously rated suitable for operation on 415V+/-10%, 50Hz+/-5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitude less than 1000M above MSL and confirming to IEC:60034-1 & IS 12615:2018., 3.2.7 Having Motor Rating 3.7Kw/ 5 HP SOR 3.2.7
Cutting a keyway on shaft, cut matching key way inside coupling bore and after that fit key snugly, than install coupling of suitable size.
S/O GI pipes 50 mm dia size medium class with GI flange welded in both sides 3 Mtrs. Long with MS strips complete with threading work on each side of pipe each flange should be 4 hole and cut for cables. Make: - Jindal / Tata / DJB approved.
S/O 50 mm dia DI check valve Make: - Sant/ Zoloto / Leader/ DJB approved SOR 4.3.3
Supply of neoprene rubber sheet having 50% neoprene, as per required size. Make:- Jyoti/Worth/DJB approved
Disconnecting outgoing and incoming connections and cables & marking them properly. Removing connections from earthling strip.
Dismantling of old pump after disconnecting from suction and delivery pipe lines, by cutting old rusted nut bolts using gas cutter and manual labor, decoupling with motor,. Job includes shifting of pump sets with base frame to ground level, etc. as reqd.
Mark area of foundation to be removed isolate utilities and use PPE while working, breaking foundation using jack hammer and dispose of debris.
Casting of RCC foundation, Plastering and making wet layer of cement on the foundation.
Fixing of newly fabricated MS Base Frame on the RCC foundation plastering/filling the gap of RCC foundation and MS base frame with the help of nuts as required.
S/O Nut Bolts
Installation of new pump and existing motor on base frame, fixing of pump sets, with suction and delivery pipe lines, coupling with motor, and making realignment of motor with pump & providing all accessories required as per site requirement.
Making electrical connections of motor with proper thimbling & other allied works as per site requirement.
Testing and commissioning by checking all connection are tight and properly insulated, performing insulation resistance test, checking of earthing continuity, test operation of individual components, energize the panel and check voltage each phase, Run the motor on no load to observe current, voltages, phase sequence, and run the motor on full load after all above checks.
SUSHMA ENTERPRISES (BID ID -1607372)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .