Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.1 LAccepted-AOC GEETANJALI COMPLEX B BLOCK 2ND FLOOR MUKUNDA DAS ROAD MILANPALLY SILIGURI 734405 DARJEELING | SILIGURI | DARJEELING | WB | 734405 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹48.1 L+₹1.7 L (3.57%)Rejected-Finance EAST VIVEKANANDAPALLY RABINDRA SARANI SILIGURI 734 006 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734006 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹48.5 L+₹2.1 L (4.42%)Rejected-Finance 75 VIDYAPITH ROAD DESHBANDHU PARA SOUTH PO SILIGURI TOWN DIST DARJEELING WB PIN 734004 WB | JALPAIGURI | WEST BENGAL | 734004 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹48.6 L+₹2.1 L (4.58%)Rejected-Finance EAST VIVEKANANDA PALLY MANGAL PANDEY SARANI PO RABINDRA SARANI SILIGURI 734 006 WB | JALPAIGURI | WEST BENGAL | 734006 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹48.8 L+₹2.3 L (4.97%)Rejected-Finance A 4 VIVEKANANDA SUPER MARKET 2ND FLOOR HILL CART ROAD SILIGURI 734 001 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sukna
ost Simulbari 734 009 Dist Darjeeling WB
COMPREHENSIVE REPAIR B/R WORKS AND OTHER ELECTRICAL WIRING, FITTING WITH ALLIED WORKS IN FSG, MES IB AND ZONE B AREA UNDER GE SUKNA OF SUKNA MIL STN
2023_MES_595308_1
GE Sukna/8535
Open Tender
Civil Works - Highways
Works
270 days
Sukna
As per notice of tender
8 documents required · 8 mandatory
₹500
GE Sukna
₹90,000
27 Jun 2023
16 May 2023
8 Jun 2023
16 May 2023
7 Jun 2023
1 Jun 2023
Amount
Cutting of the shrubs, plants and bushes etc. of an description and any girth and taking out rods from the wall or roofs/ chajjas and marking good disturbed portion with PCC 1:2:4 type B-0 or cement mortar (1:3) complete all as directed.
Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for Manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing cement concrete complete all as specified and directed.
M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 25 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame including demolition of existing cement concrete complete all as specified and directed.
M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.
Supply only Integral water proofing compound.
M/L repair to broken/damaged RCC chajjas by making good with PCC 1:2:4 type B1 or cement mortar 1:3 rendering 15mm thick mixed with water proofing compound to top & sides and soffits in cement mortar 1:4 including necessary form work, reinforecement duly welded if required including demolition of broken/loose PCC or taking down old plaster at any storey of bldg complete all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all specified and directed.
M&L for Granite work (of any type) 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed by Engr-in-Charge.
M&L for rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc. 200 mm thick (horizontal or sloping) work as rough finished surfaces of concrete complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. Species of timber :- Gamari (Gnelina arborea) / Chickerassy (Chukrasia Tabularis) / Siris (Albizzia procera) / Kalasiris (Albizzia Odoratissima)
S&F 30 mm thick flush shutters, solid core construction, with MDF board and both face covered with decorative face veneer with 6mm thick teak wood lipping/ frame to match complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed.
S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. Make:- M/s Jain Doors Pvt Ltd (Woodify) / M/s Sylvan Plyboard (India) Pvt. Ltd (Sylvan Ply) / M/s Sri Bhawani Plyboard Industry / M/s A-1 Teak Products Pvt Ltd / M/s Vidya Ply & Board Pvt Ltd / M/s SA Plywood Industry (P) Ltd (GLOBE) / M/s Archidply industries ltd
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete as per specifications and drawing including dismantling as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F 5 mm thick solid PVC insulation panels placed in false ceiling , fixed with screws in ceiling over and incluiding false ceiling of grid size 605 x 605 mm including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and including dismantling old grid ceiling and complete fixing arrangment as per specification all as directed by Engineer-in-Charge. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
M&L for plaster of paris decorative type ceiling cornices of 75 x 75mm wide complete all as specified and as directed.(Make,colour and pattern approved by GE/Engr-in-Charge)
S&F Decorative type CP double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod including 06 No rings fixing with screws complete all as specified and directed by Engr-in-Charge.
S&F Decorative curtain rod CP of 28mm dia complete all as specified and directed by Engr-in-Charge.
S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S & F 100 mm long medium weight, stainless steel Butt hinges with screws complete all as specified and directed.
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 40 mm complete all as specified and directed.
S&F in repairs 150 mm long extruded aluminium handles, cast type polished complete all as specified and directed.
Supply and fix in repairs mortise locks suitable for aluminium door of 100 mm size 4 lever aluminium body vertical type as per existing or sample complete all as specified and directed.
S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed.
S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body all as directed by Engr-in-Charge.
S & F in repairs stainless steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.
S & F rubberised door seal 50 mm width including fixing with nails or adhesive with door complete all as specified and as directed.
S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
S&F Roof truss (framed) trussed, purlins,crane gantires of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 including one shop coat of zink chromate primer paint including preparation of surface including dismantling complete all as specified and directed.
S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed.
S & F Steel ventilator with top hung shutters including hinges, steel peg stay, complete all as specified and directed.
S&F Pressed steel frame size 125 x 60mm (PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, medium weight hinges( 125mm- 03 Nos for each leaf and 75mm-01 No for stopper of each leaf) lock strike plate, hold fast etc., including filling frame with PCC 1:3:6. type C-0 (using 12.50 mm stone aggregate), complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri
S&F Pressed steel frame size 105 x 60mm (PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, medium weight hinges( 125mm- 03 Nos for each leaf and 75mm-01 No for stopper of each leaf) lock strike plate, hold fast etc., including filling frame with PCC 1:3:6. type C-0 (using 12.50 mm stone aggregate), complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri
M&L for Powder coated Aluminium anodised door,window,and ventilator shutter and frame any type (Sliding or openable )with frame and other similar work etc. aluminium heavy section fabricated incl all necessary joining cleats for fixing glass/particle board with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading etc.complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
M & L in repairs 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed.
M&L 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in footpath/ hard standing/pavings/plinth protections, finished even and smooth using extra cement including spike rolling to making impression of expended metal, while the concrete is green complete all as specified and as directed.
M&L for 75 mm thick cement concrete, type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring finished rough to receive finishes complete all as specified and directed.
M&L for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface. (iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm. (Contd...)
(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer's instruction. Note :- (a) Bituminous primer shall be "ShaliTex Primer" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. (d) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “WP Shield” manufactured by M/s Sika India Pvt Ltd or equivalent of M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (e) Water proofing paint shall be by M/s STP Ltd or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited
M&L Coloured glazed ceramic tiles 350 x 450 x 7 mm/450 x 300 x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 cm thick backing with cm 1:3 complete all as specified and directed.
M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm laid on floor surface jointed and pointed with coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directedby Engineer-in-Charge.
M&L double charged premium quality coloured vitrified ceremic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over including screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough . (Make: Orient, Kajaria & Somani)
M&L double charged premium quality coloured vitrified ceremic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in vertical surface in skirting etc set and jointed :in neat cemetn slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed (Make: Orient, Kajaria & Somani)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premisesl complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 5 mm thick rendering in CM 1:3 on ceiling finished even and smooth without using extra cement including taking down plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) including taking down plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.(Note-WPC will be measured and paid separately)
M&L for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of primer over a thin layer of wall care putty on wall surfaces complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar)
M&L complete removal of existing treatment and preparation of old plastered wall surfaces and including applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L for prepration of new plastered ceiling surfaces and applying two coat of oil emulsion distemper over a coat of primer over a thin layer of wall care putty complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M & L for preparing new wall plastered surface, and applying two coats of exterior emulsion paint over one coat of primer complete all as specified and as directed Make of weather coat paint:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints
M&L for complete removal of exisitng treatment of old decorated surfaces of wall and applying two coat of exterior emulsion paint over one coat of primer complete all as specified and directed. Make of weather coat paint:- Royal acrylic (crimson paints pvt ltd) / Dulax / shalimar paints ltd (Extra maximum ultra) / Berger paints ltd (weather coat) / Asian paints ltd (Appex ultima) / Jotun India pvt ltd Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints
S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
S&F 4 mm (plus minus 0.50 mm) thick Sheet glass, ordinary quality and glazing with oil putty or in rubber beading with one way film in squares exceeding 0.5 Sq. M in each pane complete all as directed by Engr-in-Charge.
S&F 3 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m. in each panes all as specified and directed .
Hacking out old broken glass (any thickness, size, quality or description) from steel/wooden frames or stones, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.
M&L for preparation of new painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M & L Touch wood polishing on surfaces of any description,width or girth cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down complete all as specified and directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank including dismantling of old tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Polywell Make of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf
S&F in repair rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 500 ltr capacity PVC water storage tank without dismantling the tank incl writting the item "Tank Cleaning on ____" indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by Engr -in-charge.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 1000 to 2000 ltrs capacity PVC water storage tank without dismantling the tank incl writting the item "Tank Cleaning on ____" indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by Engr -in-charge.
S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range)
S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf
S & F in repairs Grating doom 100 mm dia of PTMT. (Minimum weight 25gms) complete all as specified and directed.
S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for cold/hot water supply complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) bends of any radius, fixed with cement solvent, complete all as specified and directed.
S & F in repairs 110 mm bore PVC (SWR) bends of any radius, fixed with cement solvent, complete all as specified and directed.
S & F in repairs 110 mm bore PVC (SWR) branch piece single, (single Y) equal or unequal, fixed with cement solvent, complete all as specified and directed.
S & F in repairs 110 mm bore PVC (SWR) junction double, (double T) equal or unequal, fixed with cement solvent, complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) vent cowl including taking down old unsuitable vent cowl complete all as specified and directed.
S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. Make of Water Closet:- Hindware, Cat No. - 20011 (Starwhite) or equivalent in Cera (Med Range) / Essco Make of Seat cover:- Hindware, Model - Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco
S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. Make:- Hindware, Cat No. - 20042 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco)
S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. Make:- Parryware, Cat No.- E8055 or equivalent in Cera(1st quality) / Hindware / Essco
S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for european water closet pan complete all as specified and directed. Make:- Hindware, Model - Seat Cover Standard (Starwhite) or equivalent in Cera (Med Range) / Essco
S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware, Cat No. - 10010 (Starwhite) or equivalent in Cera (Med Range) / M/s Jaquar & Company Pvt Ltd (Essco) Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in M/s Jaquar & Company Pvt Ltd (Essco) / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long complete all as specified and directed. Make Jaquar , Cat No-CAN-1171N or Equivqlent
S&F in repair towel rail 600mm long aluminium anodised of brass CP fixed with and including CP brass screws complete all as specified and directed.Make Jaquar , Cat No-CAN-1111 SM or Equivalent
S&F in repair fancy type bib tap chromium plated 15 mm bore cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Cat No-CON-047KN or Equivalent
S&F in repair overhead shower 110mm round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system screwed down screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed. Make Jaquar , Cat No-OHS-1989 or Equivqlent
S&F CP pillar tap chromium plated 15 mm bore with capstan head, screwed reed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe as in repair complete all as specfied and directed. Make Jaquar , Cat No-CON-011KN or Equivqlent
S&F in repair brass CP wall mixture chromium plated 15 mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts, connecting legs and wall flanges screwed for iron pipe as complete all as specfied and directed. Make Jaquar , Cat No-CON-219KN or Equivqlent
S&F in repairs PVC waste pipe for urinal/ WHB 32 mm/ 40 mm bore with one end with socket complete all as specfied and directed.
S&F in repair 15mm dia angle stop cock fancy type chromium plated incl CP nipple and socket complete all as specfied and directed. Make Jaquar , Cat No-CON-059KN or Equivqlent
S&F in repair 15mm dia concealed stop cock fancy type chromium plated with and including operating lever and adjustable wall flange complete all as specfied and directed. Make Jaquar , Cat No-CON-083FTK&ALD-083FT or in Cera, Prayag
S&F in repair 15mm dia 2 way stop cock/angle stop cock fancy type chromium plated type complete all as specfied and directed. Make ESSCO , Cat No-SQT-526AFKN or Equivalent in Cera, Prayag
S&F as in repair bib tap 15mm bore fancy type long body chromium plated in repair incl CP nipple with socket complete all as specfied and directed. Make Jaquar Cat No-CON-107KN or Equivqlent,
S&F as in repair Health faucet of CP 15mm bore fancy type and with 1 mtr long easy flex tube in chrome finish and wall hook including CP nipple with socket complete all as specfied and directed by Engr-in-Charge. Make Jaquar , Cat No-ALD-565 or Equivqlent
S&F as in repair Jet spray of CP 15mm bore fancy type with suitable flexible pipe as per site requirement incl CP nipple with socket complete all as specified and directed by Engr-in-Charge.Make essco Cat No-ALE-547 or Equivalent in Cera, Prayag
S&F brass CP Basin mixture chromium plated 15 mm bore with capstan head, screwed reed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe as in repair complete all as specified and directed. Make Jaquar , Cat No-CON-167KNB or Equivqlent
S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm and including 32 mm waste pipe & coupling complete all as specified and directed. Make:- M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s Bluestar Sanitary Industries Pvt Ltd / M/s JMD International (Brand D-sons)
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.
Supply & fix pre-painted 4mm thick E-board designerd/decorative ceiling of size 60x60 cm fixed to timber /GI/ aluminium frame work with screws in ceiling flat or sloping false ceiling Hangers 6 mm dia. G.I complete all as per manufacturer instruction including taking down and complete fixing arrangment as per specification all as directed by Engineer-in-Charge
S&F anodised aluminium snap grid frame work for false ceiling (flat or sloping) of grid size 605 x 605 mm and including hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed. Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products
M&L in replacement point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Havells /MESCAB/ Polycab /Phinolex Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per Sl. item No. 119 above but for one 5 / 6 Amps socket outlet point on same board.
All as per Sl. item No. 119 above but for one 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No. 119 above but for one light point controlled by two, 2 - way switches.
M&L in replacement point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including MS shunken box, hylam sheet of thickness 3mm including all other fixing accessories for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M&L in replacement point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch complete all as specified and directed. Make of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems
All as per Sl. item No. 124 above but for one 5 / 6 Amps socket outlet point on same board.
All as per Sl. item No. 124 above but for one 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No. 124 above but for one light point controlled by two, 2 - way switches.
M&L in replacement point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) PVC Cassing caping in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including MS shunken box, hylam sheet of thickness 3mm including all other fixing accessories for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M & L in replacement concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells /Mescab/ Polycab / Finolex Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M & L in replacement concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M & L in replacement concealed sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M&L in replacement sub main wiring power/circuit using FRLS, PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC casing caping complete all as specified and as directed. (Note : (i) Two single core wires of 2.5 Sqmm and one wire of 2.5 Sqmm and one run of PVC conduit shall be measured as one unit). (ii) The unit rate included for making good the disturbed surface including finishes to match with the adjoining surfaces alongwith cutting chases) . Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL/Finolex Make of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M & L in replacement for sub main wiring with 2 runs of 4 Sqmm main wire alongwith 1 run of 4 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc., complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length. Make of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems
M & L in replacement for sub main wiring with 2 runs of 6 Sqmm main wire alongwith 1 run of 6 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc., complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length. Make of cable :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC casing caping:- Richa Cables / AKG Industries / Harsh Electro Systems
S&F switch piano, single pole, one way, 5 / 6 Amps 240 volt complete all as specified and directed. Make :- L&T/ Anchor / Legrand/ C&S
S&F switch piano, single pole, two way, 5 / 6 Amps, 240 volt complete all as specified and directed. Make :- L&T/ Anchor / Legrand/ C&S
S & F Socket outlet 5 Amps 3 pin flush type complete all as specified and as directed. Make: Anchor/Legrend/Havells.
S & F Switch piano 5 Amps single pole bell push old unsv ones complete all as specified and as directed. Make: Anchor/Legrend/Havells.
S & F Switch Socket combination 16 Amps 3 pin flush type complete all as specified and as directed. Make: Anchor/Legrend/Havells.
S & F in repair recessed Mounted Round LED Downlighter 15 watt having slim edge with die cast aluminium housing finished in premium white powder coating & PC Opal diffuser with integral Electronic LED Driver. IP20, PF ≥0.95, total System Lumens Efficiency 110 lm/W and color temp 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. Make : Crompton, Cat no - LSCRM-15W-CDL / Philips / Havells.
S&F Recessed Mounted Square (2'x2') LED Panel light 36 watt with CRCA powder coated housing & high transmittance Opal diffuser for glare free with Electronic LED Driver. IP20, PF ≥0.95, System Lumens ≥120 lm/W, 5700k CRI ≥ 80, Operating Voltage range 140 V - 270 V.complete all as specified and directed. Make- Crompton / Havells / Philips
S & F in repair pendent light with black powder coated aluminium housing and pressure die cast heat sink having high efficiency of capacity 15 watt , Operating Voltage range 140 V - 270 V complete all as specified and as directed. Make : Havells, Cat no - UNECOPPENDDLP15WLED830S24BLK / Philips / Havells.
S & F in repair surface Spot light with white powder coated aluminum housing and pressure die-cast heat sink having high efficiency of capacity 15 watt , Operating Voltage range 140 V - 270 V complete all as specified and as directed. Make : Havells, Cat no -NECOSURFDLS15WLED840S24WHT / Philips / Havells.
S&F 4 mm dia GI wire for earth continuity conductor for making connection from earth test point to main DB all as specified and directed by Engr-in-Charge
Refreshing of electrical connection near main distribution board with changing of necessary MCBs, wire appropriate size, redistribution of loads, fixing of all connection in proper ways, cleaning and rejointing of earth and neutral bus bar connection etc all as directed by the Engr-in-Charge. (Note: - this job is labour only and all materials incorporated in this job will be measured and paid separately in the relevant items above)
S&F MCB SPN 40 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series, including dismantling taking down unsvericeable ones complete all as specified and directed. Make :- L&T / ABB / Legrand / C&S
S&F MCB SP,10KA, 230V, C-curve, 6-32 amps unsvericeable ones complete all as specified and directed. Make :- L&T / ABB / Legrand / C&S
S&F ceiling rose, 3 phase /PVC/ polycarbonate isolated body complete all as specified and directed. Make: Anchor/Legrend/Havells.
S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed. Make :- Havells / Anchor / Legrand
S&F MCB ,SPN DB, 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including dismantling taking down unsvericeable ones with MCB etc complete all as specified and directed. Make :- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
S&F MCB ,SPN DB, 8 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed including dismentling taking down unsvericeable one including MCB etc complete all as specified and directed. Make - Legrand /L&T/ ABB / Schneider
S &F Bell buzzer, Ding Dong AC. 230 volts, single pole incluing taking down old unsv ones completed as directed. Make: Anchor/Legrend/Havells.
S & F in repair LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF ≥0.95, total System Lumens not less than 1100 lm, 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. Make:- Crompton / Phillips / Havells/Orient
S&F in repairs LED battery backup inverter bulb of Lamp wattage: - 9 to 12 Watts, Battery: - Not less than 2200mAh or not less than 4 hrs backup,Efficeacy: - Not less than 110 Lm/Watt including taking down old unsv ones complete all as specified and directed. Make:- Crompton / Phillips / Havells/Orient
S & F in repair Surface and wall mounted LED batten 20 watt 4ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.95, Efficiency not less than 110 lm/W color temp 6500k CRI ≥ 80, Operating Voltage range 140 V - 270 V complete all as specified and directed. Make:- Crompton / Phillips / Havells/Orient
S&F in replacement LED batten light fitting 1 x 10 watt inverter (backup) type, 230 Volts, suitable for surface mounting, lithium ion battery with minimum 4 hrs backup time, extruded polycarbonate housing & extruded polycarbonate diffuser, lumen efficacy 110 Lm / watt (minimum), colour temperature 650 0K (minimum), CRI 80 (minimum), IP-20 (minimum), PF 0.90 (minimum), in-built surge protection 3.5 KV (minimum) inlcuding all fixing arragnement and electrically connecting from ceiling rose to light fitting & taking down complete all as specified and directed. Make:- Crompton / Phillips / Havells/Orient
S & F Stepped type fan regulator flush type incluing taking down old unsv ones complete all as specified.Make-Anchor or equivalent. Make: Anchor/Legrend/Havells.
S & F in repair LED Street Light 30 watt made up of pressure die cast aluminiun housing with highly efficient LEDs and PC cover with integrated lens with IP66, IK07, System Lumen Efficasy ≥100 Lm/W, 5 kV Surge Voltage Protection,Operating Voltage range 140 V - 270 V and bracket suitable for street light made out of GI pipe light grade of 25 mm bore & 0.75 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed.
S&F VTPN DB,MCCB incomer,4 ways single Metal door ,IP-43 IK 08 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+12 complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and as direct.
S&F VTPN DB,MCCB incomer, 8 ways single Metal door ,IP-43 IK 08 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+24 complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down old unsv ones complete all as specified and as directed.
S&F MCCB 4P 125 Amps 415V ,50 Hz ,breaking capacity 25 KA, type DU 250 C, Including dismentling taking down unsvericeable one complete all as specified and as directed.
S&F MCCB 4P 160 Amps 415V ,50 Hz ,breaking capacity 25 KA, type DU 250 C, Including dismentling taking down unsvericeable one complete all as specified and as directed.
S&F in repairs Single pole and neutral enclosure witha two pin and earthplug and socket complete with Double pole MCB 20 A complete all as specified and as directed..
S&F in repairs exhaust fan 300 mm sweep, heavy duty, metal body, 1400 RPM (minimum), AC single phase, 230 V, 50Hz along with louwer Shutter / bird guard, nuts, screws, bolts including electrical connection, writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Make :- Havells, Model - Turbo Force SF NEO or equivalent in or equivalent in Crompton / Orient / Philips Note: Old unsv fans retrived from site deposited to the AGE EM Fan section and rate for the same is deemed to be included in the quotated rate.
S&F in repair exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint complete all as specified and as directed. (The quoted rate is including for taking down and depositing old fan to MES store). Make: - Crompton/ Havells / Usha / Orient
S&F in repair of energy saving BLDC ceiling fan 5 star ratingType of motor: - Brush Less DC Motor (BLDC) and Input Power: - 26 watts with full speed and reduced power consumption with reduced speed technology and RPM: - 340 to 375 rpm and Sweep: - 1200 mm and without remote. Specified and directed by Engr - in Charge. (The quoted rate is including for taking down and depositing old fan to MES store). Make: - Crompton/ Havells / Usha / Orient
Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 4 sqmm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismentaling old unsv ones complete all as specified and as directed by the Engineer-in-Charge.
Embee associates
SHRI ARUN BHATTACHERJEE
PS ENTERPRISE
KARMIBRINDA
MS ESSCON
S D CONSTRUCTION CO
M/S ASHRAFI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .