Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-Finance | ₹24.8 L | L1 | Accepted-Finance BEING LOWEST |
| 2 | L2₹25.3 L+₹52,985 (2.14%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | ₹25.3 L+₹52,985 (2.14%) | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹25.6 L+₹81,065 (3.27%)Rejected-Finance | ₹25.6 L+₹81,065 (3.27%) | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹25.7 L+₹91,300 (3.69%)Rejected-Finance | ₹25.7 L+₹91,300 (3.69%) | L4 | Rejected-Finance NOT BEING LOWEST |
| 5 | L5₹27.9 L+₹3.2 L (12.7%)Rejected-Finance | ₹27.9 L+₹3.2 L (12.7%) | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | santulan & Company L1 | N AND G CONSTRUCTION L4 | RK ENTERPRISES L6 | R k construction L2 | EAST PUNE SERVICES L5 | Divasapati Enterprises L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar all as specified and directed. | 15 | Cum | 216 ₹3,240 Lowest | 300 ₹4,500 | 350 ₹5,250 | 330 ₹4,950 | 300 ₹4,500 | 810 ₹12,150 |
| 2.00 | S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 all as specified and directed. | 2,300 | Kg. | 100 ₹2,30,000 | 98 ₹2,25,400 Lowest | 130 ₹2,99,000 | 100 ₹2,30,000 | 100 ₹2,30,000 | 118 ₹2,71,400 |
| 3.00 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. all as directed and specified. | 215 | Sqm | 82 ₹17,630 | 60 ₹12,900 | 45 ₹9,675 Lowest | 60 ₹12,900 | 50 ₹10,750 | 81 ₹17,415 |
| 4.00 | S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 375 | Sqm | 789 ₹2,95,875 | 620 ₹2,32,500 Lowest | 850 ₹3,18,750 | 730 ₹2,73,750 | 700 ₹2,62,500 | 690 ₹2,58,750 |
| 5.00 | S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified | 30 | Sqm | 800 ₹24,000 | 630 ₹18,900 | 800 ₹24,000 | 730 ₹21,900 | 600 ₹18,000 Lowest | 620 ₹18,600 |
| 6.00 | Dismantling plain or corrugated steel sheeting any guage thickness from Hangar Doors complete all as specified and as directed | 285 | Sqm | 19 ₹5,415 | 18 ₹5,130 Lowest | 30 ₹8,550 | 30 ₹8,550 | 50 ₹14,250 | 21 ₹5,985 |
| 7.00 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge | 165 | Sqm | 15 ₹2,475 | 42 ₹6,930 | 30 ₹4,950 | 30 ₹4,950 | 50 ₹8,250 | 14 ₹2,310 Lowest |
| 8.00 | Material and labour for suspended false ceiling using anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid as per manufacturer instruction all a specified and directed by Enginner in Charge. | 165 | Sqm | 1,000 ₹1,65,000 | 750 ₹1,23,750 | 1,200 ₹1,98,000 | 850 ₹1,40,250 | 700 ₹1,15,500 Lowest | 880 ₹1,45,200 |
| 9.00 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Hard/dense soil all as specified and directed. | 300 | Sqm | 27 ₹8,100 | 35 ₹10,500 | 15 ₹4,500 Lowest | 80 ₹24,000 | 200 ₹60,000 | 45 ₹13,500 |
| 10.00 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and directed. | 45 | Cum | 60 ₹2,700 Lowest | 100 ₹4,500 | 100 ₹4,500 | 80 ₹3,600 | 200 ₹9,000 | 105 ₹4,725 |
Tender Value
₹30.3 L
EMD Value
₹60,600
Closing Date
25 Aug 2026, 6:00 pmClosed
GE AF LOHEGAON
GE AF LOHEGAON
PROVN OF CHAIN LINK FENCING IN CERTAIN OMQs, ADDITIONAL WHBs, MODULAR KITCHEN AT OMQs AND CERTAIN MINOR WORKS OF 2 WING AF STN PUNE UNDER GE (AF) LOHEGAON
2026_MES_781487_1
8113
Open Tender
Civil Works
Item Rate
180 days
2WING AFS PUNE
Please refer Tender documents
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹60,600
Yes
16 Sept 2026
29 Jul 2026
1 Sept 2026
29 Jul 2026
25 Aug 2026
12 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar all as specified and directed. | 15 | Cum | - | - |
| 2 | S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 all as specified and directed. | 2,300 | Kg. | - | - |
| 3 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. all as directed and specified. | 215 | Sqm | - | - |
| 4 | S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 375 | Sqm | - | - |
| 5 | S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified | 30 | Sqm | - | - |
| 6 | Dismantling plain or corrugated steel sheeting any guage thickness from Hangar Doors complete all as specified and as directed | 285 | Sqm | - | - |
| 7 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge | 165 | Sqm | - | - |
| 8 | Material and labour for suspended false ceiling using anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid as per manufacturer instruction all a specified and directed by Enginner in Charge. | 165 | Sqm | - | - |
| 9 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Hard/dense soil all as specified and directed. | 300 | Sqm | - | - |
| 10 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and directed. | 45 | Cum | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.19 MB
PS_8113.pdf
Tender Documents • 0.59 MB
8113Merged.pdf
Tender Documents • 1.02 MB
BOQ_875463.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .