REPAIR MAINT TO VARIOUS B R NATURE COMPLAINTS LIKE TILING FALSE CEILING LEAKAGES ETC IN FLEET OFFICE FLEET MEDICAL CENTRE LWT CG COMPLEX AND ASSOCIATED AREAS AT ND (MB) UNDER AGE B R I UNDER GE (NW) KUNJALI COLABA MUMBAI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & Labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 but n exc 0.42 Sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Coloured glazed ceramic tiles in vertical surface 600 X 300 X 7-8 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

Material & Labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MoD land) etc complete all as specified and directed

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Granite stone (of any type) 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Granite stone 20mm thick (of any type) slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

Material & Labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:4. all as specified & directed by engn-in-charge

Material & Labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed with grey cement and pigment complete all as specified and directed.

Material & Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 80mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material & Labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material & Labour for PCC 100mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

Supply & Fixing false ceiling with powder coated exposed GI grid suspension system a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, complete all as specified and directed.

Material & Labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable flase ceiling, complete all as specified and directed. Inculding Taking down old false ceiling and rubbish off the premises complete all as specified and directed.

Material & Labour for Coloured dholpur tiles in vertical surface size and pattern as approved by Engg-In-Charge, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material & Labour for mild steel works as in doors or gates of angle or other sectons with gusset plates,plates (plain or chequered) channels, rails, braces etc complete drilled, welded etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Material & Labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Material & Labour 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply & fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Material & Labour for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed

Material & Labour for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

Material & Labour for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

Complete removal of existing water proofing treatment upto concrete surface of roof slab including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance as directed by Engineer-in-charge complete all as specified and as directed

Material & Labour for PCC (1:2:4) type B1 using (20mm graded stone aggregate) mixed with water proofing compound @ 2% by weight of cement as in concretes padding laid to required slope including finishing the concrete surfcae fair and even without using extra cement. Note: (i) PCC padding shall be turned around into coving at all vertical projection above roof upto a height of 150mm (ii) Water proofing compund shall be measured & paid separately as supply only.

Material & Labour for the roof treatment by application of two coats elastomeric coating of "TECH O THANE PU-WHITE" @ 1.5KG/SQMin CHOWKSEY CHEMICALS or NITOPROFF 600PF @1.5KG/SQM in FOSROC OR EQUIVALENT IN IWL ETC WITH DFT OF MINIMUM 1mm thickness on primed surface by using special grade of "primer PR 71"in CHOWKSEY CHEMICALS or NITOPROFF Primer in FOSROC Complete all as specified and directed. NOTE:- 1.Rate should be inclusive of removing and refixing the lightening arresteor if existing. 2.Rate should be inclusive of removal and refixing pvc water tanks or shifting of any other thing as existing as per site condition.

Material & Labour for brushing neat cement slurry with 3Kg of cement per square metre all as specified and directed.

Material & Labour for rendering 20 mm thick ready mix plaster as on fair faces of brick/stone work or concrete surfaces complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

Material & Labour for epoxy base joint paint such as on external surfaces of walls to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed

Material & Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed

Material & Labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

All as per Item No. 41 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

Material & Labour for powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for prtitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified and as directed

Material & Labour for 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs complete all as specified and as directed.

Material & Labour 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs complete all as specified and as directed.

Material & Labour in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and as directed.

Material & Labour prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

All as per Sl item No 49 herein before but on ceiling etc complete all as specified

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

Material & Labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified.

Material & Labour for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and as directed

Material & Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed.

Material & Labour for preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

SUNRISE CONSTRUCTION CO

RAJENDRA CONSTRUCTION

jalandhara construction

Nilesh Construction

siddharth and company

M/s S.D Construction Co