Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹70.0 LAccepted-AOC 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹71.2 L+₹95,667 (1.36%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹76.5 L+₹6.3 L (8.98%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | Rejected-Technical | - | Rejected-Technical due to not enlisted in class c |
Tender Value
₹65.2 L
EMD Value
₹1.2 L
Closing Date
26 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HISAR
HQ CWE HISAR HISAR MIL STN HISAR
PROVN OF JCOS ACCN AND SPL REPAIR TO BLDG NO. P-718 (ECHS BLDG) AT HISAR MIL STN UNDER GE (WEST) HISAR
2022_MES_551624_3
CWE/HSR-20 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
HISAR MILITARY STATION
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE (W) HISAR
₹1.2 L
4 Feb 2023
5 Jan 2023
28 Jan 2023
5 Jan 2023
26 Jan 2023
12 Jan 2023
Amount
Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil.
Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level exceeding 1.50m from the starting point., all as specified .
Excavation over area not exceeding 1.50 meter in depth and getting out in soft/ loose soil.
Excavation over area exceeding 1.50 meter in depth but n exc 3 m and getting out in soft/ loose soil.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm. In excavated area and in floor area fill the ground floor area upto top of plinth beam and complete all as spd and directed
M&L for hard core of broken bricks of gauge nexc 63mm deposited and spread and levelled in layers nexc 15cm tick watered and rammed to a true surface
M&L formwork to sides of concrete foundation footing, bases of columns & plinth beams.
M&L formwork to sides and soffits of floors & roof, beams beam haunchings, girders etc.
M&L formwork to sides of pillars, posts, struts, columns & stanchiours etc.
M&L formwork to soffit of suspended slabs,such as roof slabs, floor slabs,landing and simillar work n.exc 200mm thick(Horizontal/Sloping).
M&L RCC Design mix M25 using 20mm graded stone aggregate as in columns pillars and struts etc.
M&L RCC Design Mix M25 using 20mm graded aggregate as in foundations, including, footings, rafts, plinth beams and mass concrete.
M&L RCC Design Mix M25 using 20mm graded stone aggregate as in beam, contilevers, lintels over 1:5m span.
M&L RCC Design Mix M25 using 20mm graded stone aggregates as in slab.
M&L RCC Design Mix M25 using 20mm graded stone aggregates as in Chajjah
M&L RCC Design Mix M25 using 20mm graded stone aggregates as in Staircases including steps
M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary forms works complete all as specified and directed by Engr -in-Charge.
S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified
-ditto - as per item No 18 but 6mm to 8mm dia and complete as spd and directed
-do- as pe item No 18 but 8mm dia and over up to 10mm dia in stirrrups, spaeers and binders etc complete.
M&L brick work with Flyash bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:4) using old size bricks complete all as specified and directed by Engr-in-Charge.
M&L brick work with Flyash bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
M&L rendering 15 mm thick in CM 1:4 with and mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately
M&L rough cast plaster as specified (rendering coat not less than 10mm thick in CM 1:3, while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfeces and applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over 3mm thick acryllic wall care putty as approved by Manufacture complete all as specified and directed.
M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement.
M&L for applying 2mm thick wall care putty on walls including filling cracks or holes complete all as specified and directed by Engr-in-Charge. Make : Brila Wall Care Putty / Berger / JK Cement
M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified
M&L for rendering 10mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed by Engr-in-Charge.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint all as specified and directed by Engr-in-Charge.
M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of Synthetic Enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new surfaces of wood or wood based mtrls of any desc over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete as directed
S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete as directed
S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 100mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces and for payment purpose outer to outer area will be considered and complete all as specified and directed.
M&L Prelaminated PVC solid Board ,18/19 mm thick ,Prelaminated on one side with decorative choice lamination & other side balancing white lamination , including pasting wit solvent chemical as required at site or fixed with screws complete as in shelves / partition incl fixing arrangement on walls all as spd and directed by Engr-In-Charge .
S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed by Engr-in-Charge.
S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed by Engr-in-Charge.
S&F factory made mild Steel ventilators with top hung shutter (Box Type) to receive glass or wire guage and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges complete all as specified and directed by Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed by Engr-in-Charge.
S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) complete all as spd and directed
S&F Framed work Fe- 290 (Gde E-165)as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixig of steel sheeting or other coverings . Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings, running rails and guides )and hanging also fastening and fixing complete
S&F 1.25 mm Mild Steel plain Black sheet in Hearths,Coveirng to door Chowkats (frmaes) including welding of sheeting to frame , chullah hoods ,water tanks ,water troughs ,ducts ,urina ltroughs andfunnels etc cut to size edgrs beaded if directed ,holes punched including round headed screws ,clout nails or rivets and fixed to wood or steel members etc with plain 40 mm lap joints or welded / riveted seams including bending ,turning up ,mitred angles ,stopped ends, outlets etc as required
S&F Stainless steel (grade 304) railing made of Hollow tubes, channels,plates etc ,including welding grinding, buffing ,polishing and making curvature (wherever require) and fitting the same with necessary stainless steel nuts and bolts complete ,Including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steels bolts etc of required size, on top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel member shall be considered excluding fixing accesories such as nut , bolts, fastener etc complete all as specified.
S & F SS wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters.
S&F 4 mm thick figured Acrylic Glass pin head type in square n.exc 0.5 sqm each pane
Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame as directed by Engr-in-Charge.
S&F MS Sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolt plate and two on staple plate 250mm long all as specified.
S&F Aluminium anodised, barrel tower bolts of extruded section 150mm long
S&F Aluminium alloy handles, fabricated type, anodised 150mm size all as specified.
S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
M&L for 50mm thick cement concrete type C1 (1:3:6) as in plinth protection finishing the surface even and smooth without using extra cement all as specified.
Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified
M&L non skid ceramic tiles coloured pattern using 3-5 mm spacer as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed by Engr-in-Charge. Make : Somany / Kjaria / Johnson
M&L non skid coloured designer ceramic tiles with 3-5 mm spacer 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed by Engr-in-Charge. Make : Somany / Kjaria / Johnson
-ditto- all as per item No.36 above but on skirting over with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed by Engr-in-Charge. Make : Somany / Kjaria / Johnson
M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick with 3-5 mm spacer on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:3 and d complete all as specified and directed by Engr-in-Charge. Make : Somany / Kajaria / Johnson
M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge (Note : Single piece tiles will be placed on the surface of stair case tread & riser area).
M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed by Engr-in-Charge (Note : Single piece tiles will be placed on the surface of stair case riser area).
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge.
M&L for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof kerbs, Roof padding all as specified.
M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as levelling course on roof and complete all as specified and directed by Engr-in-Chargre.
M&L Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC @200 ml per bag of cement on roof surfaces. Note : WPC shall be measured and paid seperately.
Supply only liquid water proofing compound.
M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3.50Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) laid by torch application method of overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete and applying two coats of aluminium paint over APP membrane all as specified and directed by engineer-in-charge
S&F wall hung WC with low level cistern incl all internal fittings , connections to PVC outlet Pipe and white seat cover with hinges' and Health Faucet System complete all as specified and directed.
S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling & waste pipe as suitable complete all as specified and directed by the Engr-in-Charge. Make : Cera / Hindware / Prayag
S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. Make : TATA / JINDAL / SURYA PRAKASH
S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. Make : TATA / JINDAL / SURYA PRAKASH
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.
S&F rotational moulded polythene water storage tank 1000 ltrs in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20mm bore dia ball Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and 20mm bore dia nipple suitable (02 Nos) for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed by Engr -in-Charge. Make : SINTEX / ROTEX / POLYCON
S&F 15mm dia CP angle valves complete all as specified and directed by Engr-in-Charge. Cat Part No. MQT-526KN of Bof ESSCO Jaguar/Somany/Prayag
S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed by Engr-in-Charge. Make : Cat No. MQT-519KN of ESSCO Jaguar / Prayag / Somany
S&F CP Central Hole Basin Mixer with ‘U’ shape Round Casted Spout with 450 mm Long Braided Hoses complete all as specified and directed by Engr-in-Charge. Make : Cat No. TQT-516A of ESSCO Jaguar / Prayag / Somany
S&F 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge. Make : ESSCO Jaguar / Prayag / Somany
S&F 15 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.
S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.
S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge. BA-05 Make : Prayag
S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge. Make : ESSCO Jaguar / Somany / Parko
S&F CP peg set 6. complete all as specified and directed by Engr-in-Charge.
S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.
S & F toilet bath cabinet with mirror of size 600 x 450mm as per sample approved complete all as specified and directed by Engineer - in – Charge.
S&Fin towel rail 600 mm long of CP fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed by Engr-in-Charge..
S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed by Engr-in-Charge. BEA-4 Make-Prayag
S&F 20mm dia Stainless steel grade-304 with and including fency type SS bracket 2 Nos of each opening and SS side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed by Engr-in-Charge.
S&F single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate co,mplete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
S&F 75mm PVC PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge. Make : PRINCE / SINTEX / FINOLEX
Surface Excavation not exceeding 30 cm deep and average 15 cm deep and getting out in soft/loose soil.
M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded graded stone aggregate) in sub base of flooring/ hard standing and all as spd and directed
M&L for spreading of 25mm thick layer of sand cushioning all as specified and directed by Engr in Charge.
Supply and fixed 80 mm thick PU Moulded Vibratory Compaction technique made precast interlocking paver block of any size and shape confirming to IS 15658-2006 of Grade M-35 of grey cement and pigment (minimum 3 colors) placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and including filling the joints with coarse sand complete all as specified. Note:- Sand cushioning shall be measured and paid separately .
M&L for cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregates ) in coping and simimlar articles with plain faces etc set in cement mortar 1:4 complete all as spd and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete.
M &L for PCC 1:2:4 type B1 as in coping surface channels, benchings etc of lmanholes finished fair and even.
M &L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork.
M&L for TMT bars 6 to 8mm dia, cut to length bend to shape reqd incl cranking and lbinding with mild steel wire (annealed).
M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete complete all as specified and directed.
M&L 150 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars.
Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 150 mm).
M&L for point wiring with 1.5Sqmm PVC insulated and unsheathed FRLS single core multistraineded copper conductor point in and including PVC rigid non metalic consealed conduit 19/20mm dia, medium duty, ISI marked to be teminated im pressed steel terminal boxes 1.5Sqmm PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductore controlled by one witch and/ or one regulator Complete for following items complete all as specified and directed :- (a) One light/ceiling fan/Exhaust fan point controlled by one Switch.
All as per item No 205.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.
M&L for point wiring with 1.5Sqmm PVC insulated and unsheathed FRLS single core multistraineded copper conductor point in and including PVC rigid non metalic consealed conduit 19/20mm dia, medium duty, ISI marked to be teminated im pressed steel terminal boxes 1.5Sqmm PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductore controlled by one witch and/ or one regulator Complete for following items complete all as specified and directed :- (a) One 3/5 pin switch socket 5/6 Amps on Independent board.
M&L for point wiring with 1.5Sqmm PVC insulated and unsheathed FRLS single core multistraineded copper conductor point in and including PVC rigid non metalic consealed conduit 19/20mm dia, medium duty, ISI marked to be teminated im pressed steel terminal boxes 1.5Sqmm PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductore controlled by one witch and/ or one regulator Complete for following items complete all as specified and directed :- (a) One 3/5 pin switch socket 5/6 Amps on same board.
M&L for point wiring with 4Sqmm PVC insulated and unsheathed FRLS single core multistrainded copper conductor point in and including PVC rigid non metalic consealed conduit 19/20mm dia, medium duty, ISI marked to be teminated im pressed steel terminal boxes including 4Sqmm PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one witch and/ or one regulator complete for following items complete all as specified and directed:-
Supply and fixing Switch Piano flush type 5 amp single Pole one way 230 V all as specified & directed.
Supply and fixing Switch Piano 15 amp single Pole one way 230 V, flush type , ISI Mark , complete all as specified & directed.
Supply and fixing Socket 6A-2/3 pin, single Pole, AC , 230 V, flush type , ISI Mark , complete all as specified & directed.
Supply and fixing Socket 15-2/3 pin, single Pole, AC , 230 V, flush type , ISI Mark , complete all as specified & directed.
Supply and fixing Lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.
Supply and fixing LED bulb of capacity 9/10 W complete all as specified & directed.
S&F ceiling rose three terminnals, ISI Marked complete all as specified and directed.
Supply and fixing LED lights fiting 1*18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and Fixing of MCB TPN ,4 way 415 Volts DB enclousure complete all as specified and directed by Enge in charge.
Supply and Fixing of MCB 63 Amps ,4 pole 415 Volts DB complete all as specified and directed by Enge in charge.
Supply and fixing 240V, 10KA`B` curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connnection testing and commisioningcopmelte all as specified and directed.
Supply and fixing MCB SPN 40 Amps, breaking capacity 10KA (Type `B`) complete all as specfied and directed.
Supply and fixing of exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers All as specified and directed by Enge in charge.
Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litres , BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV , connection piece etc. All as specified and directed by Enge in charge.
Supply and fixing LED light fiting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fixing Single pole and neutral enclousure with a two pin and earth plug and socket complete with one single pole MCB 16 amp complete all as directed.
Supply and fixing hot water PVC connection of 15mm bore heavy duty, length upto 45cm with brass nut joints and washers at both ends complete.
Supply and fixing ceiling fans complete with blades, down roads electronic regulator and accessories , 230 volts, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated all as specified and directed.
M&L for Sub main wiring, two single core PVC insulated Copper multistranded conductor size 6Sqmm and one single core 6Sqmm size (Green in colour) for earth continuity conductor with all accessories fixed on walls, Ceiling surfaces etc., including connections at both ends complete.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply, lay, jointing, commissioning and testing LT Cable XLPE Insulated, armourded electric power cable with aluminium conductor (heavy duty) 1100volt grade, 25 Sqmm 4 core, laid trenches/duct or fixed to wall/ passing through pipe with suitable size cable glands, cable lugs, complete all as specified.
Sand filling ain trenches with clean dry nd unwashed including gently punning around cable all as specified.
Supplying and laying Bricks common burnt clay building bricks, sub-class`A` designation 75 for cable protection for LT cable aid trenches complete all as specified.
Material & labour for replacement of 40mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable /earthing strip etc complete all as specified.
Supply, Laying , jointing and testing galvanized iron tubes 40 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed ( excavation and earth work shall be measured and paid for separately)
Supply, Laying , jointing and testing galvanized iron tubes 20 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed ( excavation and earth work shall be measured and paid for separately)
Supply, Laying , jointing and testing galvanized iron tubes 25 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed ( excavation and earth work shall be measured and paid for separately)
Drilling and tapping cast iron water mains ( in position) for branch connections of the internal dia of 20 mm complete all as specified and directed.
M&L for replacement of gun metal gate valve ISI Marked with iron wheel head 20 mm bore complete with necessary fitting as required at site complete all as specifed and as directed.
M&L for replacement of gun metal gate valve ISI Marked with iron wheel head 40 mm bore complete with necessary fitting as required at site complete all as specifed and as directed.
M&L for Earth filling in Bldg Upto top of Plinth Beam incl spreading in layers n exc. 30cm thick, watering, ramming/ rolling and finishing to reqd size, shape etc n exc 1.5m hich from base complete all as specified. Note :- Excavated soil in this work shall be used for Earth filling. no extra payment shall be made on this account.
Surface Preparation: The surface to receive the treatment should be cleaned. The existing plaster should be removed till brick level, making sure the surface is free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of brick wall shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before applying waterproofing coating.
Supplying and applying, Smart Care Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster auth applicator.
Providing and applying 15mm of single component, ready to use polymer modified repair mortar - Smart Care Repair Mortar. Repair mortar shall have good compressive strength and shrinkage resistance. It shall be pre-blended with special additives which provides it excellent workability and adhesion to host concrete/ masonry surfaces. Repair mortar shall be applied with w/p ratio of 0.19 for 25 kg bag and shall have the properties Compressive Strength @ 30°C is 38 MPa at 28 day, Flexural Strength @ 30°C is 8 MPa, Tensile Strength @ 30°C is 2.5 MPa. auth applicator.
M&L for Complete removal of existing treatment, washing down and stopping of distempered and painted surfaces by using electrical operated grinder and M&L applying two coats of exterior emulsion paint of make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and incl of a coat of exterior wall primer over two mm thick acryllic wall care putty as approved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for gaurantee of the quality and finish of work under this item for period for a period of five years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of gaurantee.
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 2 mm thick wall care putty all as complete. Make: Berger / Asian Paint / Shalimar
M&L for complete removal of existing treatment / paint of any description of walls (any number of layers ) by scrapping with steel scrappers or with other mechanical means including applying 1 mm thick wall care putty to smooth finish complete all as specified and as directed and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-charge. Make: Berger / Asian Paint / Shalimar
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3.
Taking down cement plaster on brick / stone wall, ceiling etc incl. raking outs joints hacking for key scrubbing with water
M&L of rendering 15mm thick on other face of brickwork surfaces in CM 1:4 surface finished even and smooth w/o extra cement.
M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash all as directed and specified.
M&L preparation of old surfaces of steel of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as complete
M&L preparation of old surfaces of wooden of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete
S&F in repair Glass pane ordinary quality 3mm thick not exc 0.50 sqm each pane with fixing clips ,putty or wooden beads to wooden/steel frames with and including MS glazing clips not less than 6 Nos per pane and making good the surface matching existing surface complete incl hacking out old broken glasses all as complete..
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.
M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , area of each tiles not.exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10 mm thick screed bed in CM 1:4 complete all as specified.
M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , area of each tiles not.exceeding 0.36 Sqm as in vertical surfaces etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 10mm thick screed bed in CM 1:3 complete all as specified.
S&F in repair 15 mm dia CP Conceled Stop Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all as complete.
S&F in repair vitreous China wash down water closet pan, Pedestal pattern, coloured including fixing bolts, seat cover and making connections to flushing cistern all as complete
S & F in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified.
S&F in repair CP Bass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as spd and directed
Supply & Fixing in repair of vitreous china wash hand basin flat back size 550x400mm and including brackets and CP waste coupling 32mm dia and PVC waste pipe, complete as directed.
S&F 15mm dia Brass CP Basin/Sink mixture chromium plated fancy type long body for mixing hot & cold water screwed down for iron pipe and fixed in repair all as complete
S&F in repair Glass Corner Shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.
S&F in repair Rotational Moulded polyethylene Water Storage Tanks Three layers (cylindrical vertical with closed top) 1000 ltrs capacity (in white colour only) hoisted and fixed in posn all as specified incl 20 mm PTMT ball valve and dismantling of existing tank complete all as spd and directed
S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete.
S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel as per directed by engr-in-charge
S&F in repair Soap Dish Holder as directed by Engr-in-charge.
Dismantling of brick work built in cement mortar all as specified and directed.
S&F in repair Double Coat Hook as directed by Engr-in-charge.
Supplying and fixing in repair 30 mm thick Rajshri Brand Factory Made moulded door shutter- Wood Free consisting of frame made out of MS tube of 19 gauge thickness and size of 25 mm x 25 mm for stiles, top and bottom rails.M.S. frame shall have a coat of steel primers. The inner panel shall consist of 25 mm thick EPS of density 23kg/cbm bonded with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet manufactured by an ISO-9001-2015 certified company, with 2,4,6 raised panel design in different plain and/ or prelam colours after routing the moulded design on one side & 2 mm plain and / or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15 mm wide PVC sheet baton (made by sticking 2 mm rigid foam PVC sheets of 5 mm thickness using PVC solvent cement) and stiles sides 25 mm (5mm X 5 nos) thick and 30 mm width PVC sheet fitted along MS tube for hardware provision & for lock 25 mm thick (5mm x 5nos) PVC sheet of size 150 mm x 200 mm fixed with inner side of EPS panel etc. complete as per dirn of Engr-in-charge including taking down.
Repair/easing of aluminium door including replacement of rubber bidding, replacement of hydraulic door close etc all as specified and directed by Engr-in-chagre. The cost of hydraulic door closer shall be paid and measured separately.
S&F aluminium anodised powder coated windows, ventilators, doors, partition,sliding door and windows, grill including facbrication of frame / shutters and fixing with and including necessary lugs, hinges, cleats, rollers, aluminium handles, locking arrangement, glazings clips, and rubber beadings for fixing glass panes and wire mesh in frame complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid seperately.
S&F Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door,anodised alumnium snap beading, screws etc. complete all as specified
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified
S&F for 5.5 mm thick dark coloured glass in aluminium door windows partitions including ped/gasket complete all as specified make MODI GUARD.
M&L Aluminium die cast body door closer hydraulically regulated,designation No. 1 universal type,suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed
S&F for Aluminium Motrice lock 4 levers, double type vertical type 75mm size for aluminium doors .
S&F GI powder coated snap grid framed work for false ceiling and incl hangers 6mm dia G.I. (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete.
M&L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)
S&F hollow PVC Wall Lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawings and as directed by engineer-in-charge.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.
M&L Cement concrete 1:3:6 type C1 filling of pressed steel frame and hold fast block etc
S&F 30mm flush door shutters, soild core construction, with block board core and plywood face panels, commercial type both sides complete all as specified and directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats as directed by Engineer-in-Charge.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 150 mm extruded Aluminium handles, cast type,anodised.
S&F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.
S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250mm size all as specified and directed complete.
S&F butt hinges 100mm, medium weight complete
S&F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete
M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and fair.
M/L 75mm thick cement concrete type D-2, 1:4:8 in subbase all as specified and directed.
M&L vibratory cast concrete interlocking paver block PU moulded any shape confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment.over and incl 25mm thick sand layer complete.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), including removing out of MD Land
S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of fixing supply pipe to flushing cistern, trap and waste pipe and all fittings as directed by Engr-in-charge.
Taking down chowkats or frame with shutter, without taking off shutter from the frames area incl all fittings and as directed by Engr-in-charge.
S&F powder coated aluminium deco grill complete all as specified and directed by engr-in-charge.
Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge
S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed
S&F Modular switch 1 way 16A 1 module all as specified and directed
S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.
S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.
M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked,all as specified & directed
Supply and fixing modular bell push 6A 1 module all as specified and directed.
S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed
S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed
S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Supply only sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 16 Amp rating 240 Volt complete.
S&F i Sheet metal enclosure distribution board SPN,8 way, single door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.
Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB
S&F i Sheet metal enclosure distribution board VTPN,6way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed
Supply and fixing MCCBs FP 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCCB should be the same as that of DB
Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB
Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. all as specified and directed.
Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.
All as per serial item 251 here in before but with 2 run of single core 4 Sqmm cable with 4.0 sqmm earth wire. All as specified and directed by Enge in charge.
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
Taking down old U/S XLPE Cable including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.
Supply , laying , jointing, testing and commissioning of size 35 sqmm 3.5 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed.Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.
Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for taking out of unserviceable of LT under ground cable
Removal of surplus soil ( any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed
M&L for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat perpendicular to the direction of the cable complete all as specified and directed
Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed
M/S Punia Constructions
malik constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .