Provn of Boundary wall around solid waste MGT Infra area at Old Cantt Prayagraj.

Amount

Excavation in trenches n.exc 1.5 m deep and nexc 1.5 m width in soft/ loose soil complete all as specified and directed.

M&L for PCC Type D-2, 1:4:8 (using 40 mm crushed stone aggregate) as in foundation complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 06 herein before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC design mix M-25 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, columns, pillars, piers, posts and strut , in Beams, cantilevers, bressummers, lintels over 1.5m span etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surface finished fair and even complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surface finished fair and even complete all as specified and directed.

M&L for preparing new surfaces of Wall and applying two coats of exterior weather proof paint over a coat or primer and one mm thick wall care putty complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in floor/wall complete all as specified and directed.

S&F MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F concertaina coil 600 mm dia with 2.50 barbed mm dia high tensile strength wire fixing to Y-shaped angle iron posts on top of boundary wall complete all as specified and directed.

Returning filling in with approved excated soil including spreading, levelling in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for providing cement concrete type B-1 (1:2:4) using 20mm graded stone aggregateas in bed blocks/coping as complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shoulders and /or riveted of froged into spikes framed guard bars barred iron doors ladders framed baluuuuusters walk ways ,rallings ,frame work of water tanks and similar work con-foriming to fe 290 Gde -E- 165 ,for portions framed and hung as gates including pintle hings ,stops ,hand made slding bolts for ornamental and intricate design complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc.,complete all as specified and directed.

M&L for RCC Hume pipe 450mm bore class NP-2 incl fittings & collar laid & jointed complete all as specified and directed.

M&L for surface excavation not exceeding 30 cm deep and averaging 21 cm deep and getting out in soft and loose soil complete all as specified and directed.

M&L for 100 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and directed.

Machine pressed precast conctete interlocking paver block with grey cement & no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed.

M/s Vijay Enterprises (BID ID -3112677)