SITC of power control panels for distribution of power supply, SITC of cable looping boxes, laying of cable, providing Earthing for various Electrical equipments and installation of lightning conductor in AOR of various BOPs for BOLD QIT project

Amount

Sub-head A- Earthing for Equipments (EOTS, Radar, MIRIDS & UGS )

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm (To be clamped in case of BFL Pole/ Mast)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Sub head B (Earthing for electrical panels ( MCB DB, Looping box, Pedestal Panel, DG set power control panel)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Sub-head C (Lightning arrester)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate along with suitable weather proof isolation base as per direction of enggr in charge including holes etc.complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

Providing and fixing GI pipe along with 85 mm dia 6 mm thick GI base plate on top and bottom of the pipe. including making holes,providing Backalite seperator plates 02 nos at bottom of the GI base , nut bolt washers etc for mounting the lightning conductors finial on the top and mounting the GI pipe on the BFL Pole / areal mast complete as required as per actual site requirement

Sub-head D (Cable Laying)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 25 sq. mm (28mm)

3½ X 35 sq. mm (32mm)

Supplying & Laying of one following size PVC insulated and PVC sheathed / XLPE power cable aluminium conductor armoured cable of 1.1 KV grade with ISI marked confirming to (IS 7098 (Part - I) / 1988 with amendment up to date) Havells/ Finolex / Polycab/ KEI make direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning protective covering.

a) 3.5 x 35 Sq mm power cable aluminium conductor armoured cable

b) 3.5 x 25 Sq mm power cable aluminium conductor armoured cable

Supplying and making end termination with brass compression gland and copper lugs for 2 x 16 sq mm size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 2 X 16 sq. mm (22mm)

SITC of factory assembled cubicle type fully compartmentalised out door type single phase DG set power control distribution panel suitable for operation at 240 volts, 50HZ AC supply complete with hinges front and back opening double door complying with IP65 protection having diamensions 1100 mm L X 600 mm H X 300 mm Depth (excluding canopy) made with 3.15 mm thick CRCA sheet with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors, with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete maff up to 500 mm above ground, finishing and providing and fixing / integration of following accessories complete as required. (i) 40 A Double pole Change over MCB Make L& T/GE/Havells- 04 Nos (ii) 10-20 A Double pole C Series MCB Make L& T/GE/Havells- 05 Nos (iii). SPN Copper Bus bar insulated with heat shrinkable sleeves mounted on DMC/FRP bus bar supports of size 500 mm X 20 mm X 3 mm thick- 1 Set (iv). LED indication lamp make Rishab - 1 Set (17 nos) (v). Panel mounted Digital Volt meter make (AE / Rishab) (0 - 300V) -1 No (vi). Panel mounted Digital Ammeter with CT (make AE / Rishab) (0-50A)- 1 No ( MIN SIZE OF DISTRIBUTION PANEL IS 1100 mm L X 600 mm H X 300 mm Depth (excluding canopy) made with 3.15 mm thick CRCA sheet )(excluding canopy)

SITC of factory assembled cubicle type fully compartmentalised out door type single phase DG set power control distribution panel suitable for operation at 240 volts, 50HZ AC supply complete with hinges front and back opening double door complying with IP65 protection having diamensions 1100 mm L X 500 mm H X 300 mm Depth (excluding canopy) made with 3.15mm thick CRCA sheet with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors, with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete muff up to 500 mm above ground, finishing and providing and fixing / integration of following accessories complete as required. (i) 40 A Double pole Changeover MCB Make L& T/GE/Havells- 03 Nos (ii) 10-20 A Double pole C Series MCB Make L& T/GE/Havells- 05 Nos (iii). SPN Copper Bus bar insulated with heat shrinkable sleeves mounted on DMC/FRP bus bar supports of size 400 mm X 20 mm X 3 mm thick- 1 Set (iv). LED indicatin lamp make Rishab - 1 Set (14 nos) (v). Panel mounted Digital Volt meter make (AE / Rishab) (0 - 300V) -1 No (vi). Panel mounted Digital Ammeter with CT (make AE / Rishab) (0-50A)- 1 No ( MIN SIZE OF DISTRIBUTION PANEL IS 1100 mm L X 500 mm H X 300 mm Depth (excluding canopy) made with 3.15mm thick CRCA sheeT)(excluding canopy)

SITC of factory assembled cubicle type fully compartmentalised out door type single phase DG set power control distribution panel suitable for operation at 240 volts, 50HZ AC supply complete with hinges front and back opening double door complying with IP65 protection having diamensions 1100 mm L X 500 mm H X 300 mm Depth (excluding canopy) made with 3.15 mm thick CRCA sheet with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors, with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete muff up to 500 mm above ground, finishing and providing and fixing / integration of following accessories complete as required. (i) 40 A Double pole Changeover MCB Make L&T/GE/Havells- 02 Nos (ii) 10-20 A Double pole C Series MCB Make L&T/GE/Havells- 02 Nos (iii). SPN Copper Bus bar insulated with heat shrinkable sleeves mounted on DMC/FRP bus bar supports of size 400 mm X 20 mm X 3 mm thick- 1 Set (iv). LED indicatin lamp make Rishab - 1 Set( 10 nos) (v). Panel mounted Digital Voltmeter make (AE / Rishab) (0 - 300V) -1 No (vi). Panel mounted Digital Ammeter(0-50A) with CT (make AE / Rishab) - 1 No ( MIN SIZE OF DISTRIBUTION PANEL IS1100 mm L X 500 mm H X 300 mm Depth (excluding canopy) made with 3.15 mm thick CRCA sheet )(excluding canopy)

Sub Head F LOOPING BOXES / FEEDER PILLAR / PEDESTAL PANEL

SITC of factory assembled cubicle type fully compartmentalised out door type single phase cable looping box for operation of 240 volts, 50HZ AC supply complete with seperate wiring for accomodating 1/2 KVA online UPS having size 470 mm X 190 mm X 330 mm and 8 Nos 12 V 75 AHC SMF batteries having size of each battery 340 mm X 160 mm X 180 mm complete with hinges, front and back opening double door complying with IP 65 having overall dimension 1300 mm L X 1000 mm H X 450 mm Depth made with 3.15 mm thick CRCA sheet and with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors, with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long, 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete muff up to 500 mm above ground, finishing and providing and fixing / integration of following accessories complete as required. (i) 240V, 63A Double pole Changeover Make Havells/L&T/HPL- 01 No (ii) 10-16 A Double pole C Series MCB Make L&T/GE/Havells- 02 Nos (iii) 15/16 A SS Combined (switch socket) make Anchor / Polycab / SSK- 4 Nos (iv). LED indicatin lamp make Rishab - 5 Nos (v). Compact Exhaust Fan of size 100 mm or suitable size for above looping box -03 Nos mounted on looping box frame for proper air circulation .( MIN SIZE OF LOOPING BOX IS1300 mm L X 1000 mm H X 450 mm Depth made with 3.15 mm thick CRCA sheet )(excluding canopy)

SITC of factory assembled cubicle type fully compartmentalised out door type single phase cable looping box for operation of 240 volts, 50HZ AC supply complete with seperate wiring for accomodating 1/2 KVA online UPS having size 470 mm X 190 mm X 330 mm and 8 Nos 12 V 75 AHC SMF batteries having size of each battery 340 mm X 160 mm X 180 mm complete with hinges, front and back opening double door complying with IP 65 having overall dimension 1300 mm L X 1000 mm H X 450 mm Depth made with 3.15 mm thick CRCA sheet and with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors, with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long, 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete muff up to 500 mm above ground, finishing and providing and fixing / integration of following accessories complete as required. (i) 32 A Double pole C Series MCB Make L&T/GE/Havells- 01 No (ii) 10-16 A Double pole C Series MCB Make L&T/GE/Havells- 02 Nos (iii) 15/16 A SS Combined (switch socket) make Anchor / Polycab / SSK- 4 Nos (iv). LED indicatin lamp make Rishab - 4 Nos (v). Compact Exhaust Fan of size 100 mm or suitable size for above looping box -03 Nos mounted on looping box frame for proper air circulation. ( MIN SIZE OF LOOPING BOX IS 1300 mm L X 1000 mm H X 450 mm Depth made with 3.15 mm thick CRCA sheet )(excluding canopy)

SITC of Factory assembled Pedestal type compartmentalised distribution panel suitable for operation at 240 volts, 50HZ single phase AC supply complete with hinges front opening double door complying with IP 65 protection having dimensions 450 mm L X 450 mm B X 300 mm Depth made with 3.15 mm thick CRCA sheet with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductor with name plate, danger notice board, silicon rubber gaskets, mounted on M.S angle iron frame made with 25mm X25mm X 5mm thick angle iron having 4 nos 1200 mm long, 25mm X25mm X 5mm thick angle iron legs to be fixed as per the actual site requirement or as directed by Enginner in Charge of the work i/c providing and fixing / integration of following accessories complete as required. (i) SP&N MCB DB - 8 way Single Door make Havells/L&T/HPL- 01 No (ii) 40 A Double pole C Series MCB Make Havells/L&T/HPL- 01 No (iii) 16 A Single pole C Series MCB Make Havells/L&T/HPL- 06 No (iv) 15/16 A SS Combined (switch socket) make Anchor / Polycab / SSK- 4 Nos (v). LED indicatin lamp make Rishab - 5 Nos ( MIN SIZE OF DISTRIBUTION PANNEL IS 450 mm L X 450 mm B X 300 mm Depth made with 3.15 mm thick CRCA sheet )(excluding canopy)

SITC of Factory assembled outdoor type feeder pillar for operation at 415 volts, 50HZ AC supply complete with hinges, front and back opening double door complying with IP 65 having overall dimension 1100 mm L X 700 mm W X 300 mm Depth made with 3.15 mm thick CRCA sheet and with locking arrangement, totally enclosed, weather proof, dust proof, damp proof, vermin proof having slanting drip proof top complete powder coated to shade RAL 7032, connections, interconnections with suitable size copper conductors with name plate, danger notice board, silicon rubber gaskets, Removable gland plates made with 2 mm thick sheet steel mounted on M.S angle iron frame made with 50mm X50mm X 5mm thick angle iron having 4 nos 2600 mm long, 50mm X50mm X 5mm thick angle iron legs with supporting ladder having step width 400mm fixed in cement concrete 1:3:6 (1 cement 3 coarse sand and 6 stone aggrigate 20 mm) 500 mm below the ground and cement concrete muff up to 500 mm above ground, finishing and providing/ fixing / integration of following accessories complete as required. (i) 63A, 415V, 4 pole C Series MCB Make Havells/L&T/GE- 01 No (ii) 16 A Double pole C Series MCB Make L&T/GE/Havells- 04 Nos (iii) 32 Amp DP C Series MCB Make L&T/GE/Havells- 04 Nos (iv). TPN Copper Bus bars suitable for 100A AC Supply insulated with heat shrinkable sleeves mounted on DMC/FRP bus bar supports of size 1000 mm X 25 mm X 3 mm thick- 1 Set (consisting of 04 nos copper strip) (v). LED indicatin lamps (Red/Yellow/Blue) make Rishab marketed by L&T- 1 Set (vi). LED indicatin lamps make Rishab - 8 Nos ( MIN SIZE OF FEEDER PILLER IS 1100 mm L X 700 mm W X 300 mm Depth made with 3.15 mm thick CRCA SHEET) (excluding canopy)

Sub-head G- WIRING/ INSTALLATION OF ELECTRICAL ACCESSORIES AT ACP/OP/DISPLAY CENTRE

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 6 Module (200mmX75mm)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent / LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

8 way , Double door

6 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Triple pole and neutral

Supplying installtion Testing Commissioning of 1200 mm sweep ceiling fan with regulator 240 volt single phase of Havells/Philips/Usha makei/C wiring the down rod of standard length ( up to 30 cm) with 1.5 sq mm FRLS PVC insulated , copper conductor cable etc as reqd

Supplying and Fixing of 400 mm sweep Wall Fan 240 volt single phase of Havells/Philips/Usha make compatible to Usha MIST AIR ICY REMOTE

SUB HEAD MISC ITEM

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

75 mm X 75 mm X 60 mm deep

100 mm X 100 mm X 60 mm deep

150 mm X 75 mm X 60 mm deep

150 mm X 150 mm X 60 mm deep

180 mm X 100 mm X 60 mm deep

200 mm X 125 mm X 60 mm deep

Providing and fixing street light fitting 60 W LED make Havells model-ENDURA PEAL PLUS or equivalent in Crompton/ Philips on 40 mm dia 1 mtr GI pipe bended into 120 degree angle on existing wall complete with wiring the GI pipe, suitable size clamps nut bolts etc complete as required

Supplying and installation of fabricated multi power socket outlet Board containing 4 nos 6 pin 15/16 A power socket outlets one no. 32 A C Series SP MCB, Power indication, 3 mtr long 4 sq mm 3 core copper conductor wire, 3 pin 15/16 A male plug interconnection ete complete as required.

Supplying and fixing 10/12 Watt 230 V LED bulb on existing holder make Havells/ Crompton/ Philips.

Provision for providing and filling Ground enhancement material for improving earthing-Back Fill compound (Aluminium silicate and natural minerals)