Repair and renovation work of the dilapidated building of the Earthquake Observatory.

Amount

Malwa/Debris clearance with 15% pebble and boulder i/c excavated and disposal up to 1.00 km including all labour, t&p etc for complete work.

Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30.0m including back filling, watering and ramming of excavated earth with disposal of surplus excavated earth with all cost of labour, T&P and as per direction of Engineer-In-Charge etc. complete

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer i/c cost of all material, labour, T&Petc. Complete of work all as specified and directed by Engineer in-charge.

Providing and Fixing of 14x24 gauge power loom Galvenised wire meshaverage width of aperature 1.4 mm and nominal dia of wire 0.63 mm and welded mesh 1 X 2 inch of 10 guage over window / ventilator i/c all cost of material, labour, fixing, T&P etc. Complete of work all as specified and directed by Engineer in-charge.

Removing of slush from drains/pucca nala/septic tank and its disposal average1.00 km distance including cost of all labour, T.&P. and as per direction of Engineer-In-Charge etc. complete of work. -

Providing and fixing water closet squatting pan (Indian type W.C. Pan with 100 mm sand cast iron P or Strap, 10 litre low level white PVC Flusing Cistern with manually controlled device (Handle Level) Conforming to IS 7231 with all fittings and fix. (White Vitreous China Orissa Pattern WC Pan of Size 580x440 mm with integral type foot rests) i/c all material, labour T&P etc complete

Providing and fixing white vitreous china wash basin size 630x450 mm with C.I. brackets, a single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including making connection with all accessories and as per direction of Engineer-In-Charge etc complete in all respect.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of work all as specified and directed by Engineer in-charge.

Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265 mm size respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and T&P etc. Complete of work all as specified and directed by Engineer in-charge

Providing and fixing 40 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design complete in all respect direction of Engineer-In-Charge

Supply and fixing of 10 cm internal dia P.V.C. pipe, 6 kg/per sqcm pressure everest/charminar similar make complete with bands including supply of necessary M.S. Clamps and nuts fixed to walls including supply of all materials, labour, T&P, repair of necessary plaster and pointing. and as per direction of Engineer-In-Charge

Making septic tank of size 1.95m x 0.80m x 2.10m including Brick work in 1:4 Cement Mortar with P.V.C.connection pipe 10 cm dia. With 6 kg pressure per sq/cm with all cost of cement, material, labour, T&P and as per direction of Engineer-In-Charge etc. Complete.

Providing and fixing centering and shuttering for R.C.C work with labour, T&P and as per direction of Engineer-In-Charge etc. Complete.

Laying C.C. in 1:1.5:3 mix (1 cement :1.5 coarse sand 2.20 fineness modulus :3 graded Stone aggregate 20 mm nominal size) with mechanical mixing including all cost of cement bag, material, labour, T&P, water arrangement above 1 km distance and as per direction of Engineer-In-Charge etc. Complete in all respect.

Material and Labour for Mild steel /iron work such as R.C.C. work with 12 mm dia bar fixing and binding with 24 BWG binding wirefor complete of work all as specified and directed by Engineer in-charge.

Providing and fixing 450 mm long towel rail with total length of 495 mm wide and effective height of 88 mm, weighing not less than 170 gms complete in all respect direction of Engineer-In-Charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 510x1040 mm bowl depth 200 mm with drain board, C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required

Providing and fixing G.I pipes ( 15 )mm complete with G.I fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall etc. complete of work all as specified and directed by Engineer in-charge.

Providing and fixing G.I pipes ( 25 )mm complete with G.I fittings and clamps including cutting and making good the walls etc. internal work Exposed on wall etc. complete of work all as specified and directed by Engineer in-charge.

Providing and fixing C.P. brass bib cock ( 15 mm nominal bore) of approved quality confirming to IS standards and weighing not less than 810 gms,work all labour T&P complete of work all as specified and directed by Engineer in-charge.

Providing and fixing soil, waste and vent pipes :100 mm dia Sand Cast Iron S&S Pipe as per IS:1729 with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Providing and fixing plain bend of required degree for 100 mm dia pipe with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete for 100x100x100 mm with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 10 mm outlet with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Providing and fixing 15 mm nominal bore brass stop cock of approved quality complete in all respect direction of Engineer-In-Charge.

Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete in all respect direction of Engineer-In-Charge.

Providing and fixing 25 mm nominal bore G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required complete in all respect direction of Engineer-In-Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore complete in all respect direction of Engineer-In-Charge.

Dismantling old paster including raking out joint and disposal of debrid within 60 meters distance including all cost of labour, T&P and as per direction of Engineer-In-Charge etc complete in all respect

Wiring for light poin /fan point / exhaust fan point / call bell point with 1.5 sq.mm. FRLS PVC insulated single core copper conductor cable in surface/recessed steel conduit with modular swich,Modular plate , suitable G.I. box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core calbe etc. as required , complete in all respect as directed of Engineer-In-Charge .

Wiring for light /power plug with 2x4sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 no 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Supplying and fixing following (15/16A Switch and 6 pin 15/16 A Socket outlet) modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.with all labour T&P complete of work all as specified and directed by Engineer in-charge.

Supplying and fixing following 8way, double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Single pole)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(100 A, 16 KA, TPMCCB)

Dismantling cement concrete including all labour, T&P etc complete in all respect

Brick work with class M-105 bricks in 1:4 Cement mortar (1 cement :4 coarse sand of 2.20 fineness modulus) )with all cost of cement Bag, material, labour, T&P, water arrangement above 1 km distance and as per direction of Engineer-In-Charge etc. Complete in all respect.

12mm thick plaster on Stone Masonry with one part of cement and four parts of approved coarse sand including supply of all materials labour T&P and as per direction of Engineer-In-Charge etc complete in all respect

12mm thick plaster on Brick Masonry with one part of cement and four parts of approved coarse sand including supply of all materials labour T&P and as per direction of Engineer-In-Charge etc complete in all respect

Laying Cement Concrete in 1:4:8 mix (1 cement :2 coarse sand :8 graded Stone aggregate 40 mm nominal size) with mechanical mixing including all cost of cement bag, material, labour, T&P, water arrangement above 1 km distance and as per direction of Engineer-In-Charge etc. Complete in all respect.

Laying 35 mm thick Cement Concrete in 1:2:4 Mix (1 cement :2 coarse sand 2.20 fineness modulus :4 graded Stone aggregate 20 mm nominal size) on roof after Chipping of unsound/Weak Concrete Material with manual chiesel including cleaning the exposed surface with wire brushes and disposal of debris with all cost of cement other material, labour, T&P and as per direction of Engineer-In-Charge etc. Complete of work.

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 cement and coarse sandwith cement colour slurry, joining and polished i/c all cost of material,labour,T&P etc. Complete of work all as specified and directed by Engineer in-charge.

Supply & Fixing of 6 mm thick size of China Glazed Tile of first quality of flooring or skirting or dado laid with 1:3 cement and coarse sand with cement colour slurry, joining and polished i/c all cost of material,labour,T&P etc. Complete of work all as specified and directed by Engineer in-charge.

Laying Cement Concrete in 1:2:4 mix (1 cement :2 coarse sand 2.20 fineness modulus :4 graded Stone aggregate 20 mm nominal size) with mechanical mixing including all cost of cement bag, material, labour, T&P, water arrangement above 200 m distance and as per direction of Engineer-In-Charge etc. Complete in all respect.

Providing and laying APP(Atactic Polypropylene Polymer)modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fiber matt consisting a coat of bitumen primer for bitumen membrane @.40 liter/sqm by the same membrane manufactured of density at 25 degree centigade, 0.87-.89 kg/liter and viscocity 70-160 cps. over the primer coat the layer of membrane shall be laid using bitumen torch and selling all joint etc. , and preparing surface complete. the vital physical chemical perameter of the membrane shall be as undert joint strenth in longitudnaln and transverse direction as 60/80N. softening point of membrane not less than 150 degree centigrade.Cold flexibility shall be upto -2 degree centigrade when tasted in accordance with ASTM,m D -5147. the laying of membrane shall be got done through the authorised applicater of the manufacturer of membrane complete all as all as specified and directed by Engineer in-charge.

Providing & Placing on terrace 3 no.of polyethylene water storage tanks with cover and suitable locking arrangements with all cost of Material, Labour, T&P with all accessories and as per direction of Engineer-In-Charge etc complete in all respect.

Material and labour for synthetic enamel paint of approved brand (Asian/Nerolac/Berger/JSW) in two coat on old surface with one coat of approved brand of primer including preparation of old surface complete all as specified and directed by Engineer-in-charge

Material and labour for exterior wall painting with acrylic emulsion paint of approved brand (Asian/Nerolac/Berger/Birla) in two coat on old surface with one coat of approved brand of primer including preparation of old surface complete all as specified and directed by Engineer-in-charge

Material and labour for interior wall painting with acrylic emulsion paint of approved brand (Asian/Nerolac/Berger/Birla) in two coat on old surface with one coat of approved brand of wall putty ( Berger/Birla including preparation of old surface complete all as specified and directed by Engineer-in-charge

Supply & Fixing for 80 mm thick Precast concete I-Shape interloking pavers block a with top layer of minimum 8 mm thick having plan dimension 200x(160+120)mm O.P cement ,Smooth high gloos finish ,skid reditant manufatured from rubber moulds through vibro-compression machanim.The compressive strength of concete paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4cm thick layer of fine sand including cost of material, labour, T&P TAXES etc requried for proper completion of the work as direced by Engineer-in -charge.

Provding and fixing 50 watt LED light Havells, Crompton, Philips or equvalent make including the cost of all material , labour, T & P etc for complition of work.

Providing & fixing 25 W white Solar LED Standalone Street light with 75 WP Solar Panal and 12.80 volt Lithium Ferrophosphate Battery with 6 m HDG Tubular Pole with all cost of Lights, Material, Labour, T&P with all accessories etc and as per direction of Engineer-In-Charge complete in all respect.

Provding and fixing 200 Amp and 415 volts T.P. switch Havells, Bajaj, Philps or equvalent make including the cost of all material , labour, T & P etc for complition of work.

Provding and fixing 100 Amp and 415 volts T.P. switch Havells, Bajaj, Philps or equvalent make including the cost of all material , labour, T & P etc for complition of work.

Supply and fixing three core 6 Sq mm Cable with copper conductor Havells, Finolux, Polycab or equvalent Including cost of all material, labour and T&P etc. Complete work.

Supply and fixing two core 2.5 Sq mm Cable with copper conductor Havells, Finolux, Polycab or equvalent Including cost of all material, labour and T&P etc. Complete work.

Providing and fixing solar wire fencing in 6 layers including all cost of 2 nos. 25 mm G.I. pipe post 2.40 m height, 4 mm G.I. Wire in 6 layers of 3.00 m length each , rubber seel, clamp, wire chakry, nut warser , labour T&P etc complete .

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with all cost of material, labour, T&P, and as per direction of Engineer-In-Charge etc complete.

R.R stone masonry with old boulder laid in 1:4 Cement sand mortar including cost of all material, labour, T&P, water arrangement above 200 m distance and as per direction of Engineer-In-Charge etc.

Supply and Laying /Filling R.B.M.in pitching and compacted with cost of all material, labor, T&P and directed by Engineer-in-charge etc.

Supply the Boulder 20 kg to 40 kg (minimum size of boulder 15cm) and Laying Pitching up to 3m hight 60 meter lead complete all respect and direction of Engineer-In-Charge etc.

RANA FABRICATORS (BID ID -4825847)