Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.2 L+₹3.2 L (9.25%)Rejected-AOC 252 GREEN CITY II BARNALA BYPASS ROAD BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-AOC L2 |
Tender Value
₹43.9 L
EMD Value
₹87,860
Closing Date
1 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AF Bhisiana
CWE AF Bhisiana
CWE(BHI)/BHI-51/2022-23
2023_MES_578701_1
CWE(BHI)/BHI-51/2022-23
Open Tender
Civil Works
Item Rate
180 days
AF STN BHISIANA
AS PER COVER 1
6 documents required · 6 mandatory
₹500
Yes
GE AF Bhisiana
₹87,860
Yes
17 Mar 2023
2 Feb 2023
3 Mar 2023
2 Feb 2023
1 Mar 2023
17 Feb 2023
2 Feb 2023 - 9 Feb 2023
Amount
Excavating over areas, not exceeding 1.5m deep and getting out (soft/loose soil) including forming surfaces to required level/slope, complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exc 10 sqm on plan and n exc1.5 m in depth and getting out soft/loose soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.
Removing excavated soil n exc 50m and depositing where erected at a level n.exc 1.5m above the starting point complete all as specified and as directed.
Removing excavated material exc. 250m but not exc 500m and depositing where directed at a level n. exc. 1.5m above the starting point obtained from item No-01 above, complete all as specified and directed by Engineer-in-charge.
Rolling /consolidating formation surface in cutting with exc 8 tonne to not exc12 tonne power road roller complete all as specified and directed.
Material and labour for 150mm thick (compacted thickness in single layer) Granular sub base of shingle or gravel, spread rolled and consolidated to gradient and camber as required over compacted sub grade, complete all as specified and as directed.
Material and labour for 150mm thick (compacted thickness) WMM, in 2 layers of 75mm thick each using grading requirement as per table 400-11 of yellow book of MORTH using mechanical paver and rolled with vibratory type power roller of 8 to 10 tonne capacity to required camber and gradient including spreading rolling and consolidated as required, complete all as specified and as directed.
Material and labour for applying evenly priming/tack coat with bituminous primer @ 10Kg/10sqm using paving bitumen of grade VG-10, complete all as specified and as directed.
Material and labour for Premix bituminous macadam design mix with 4% of binder content by weight of total mix using paving bitumen VG-30 grade laid with self propelling mechanical paver, rolled & compacted to an air voids of 4% or lower in the field required gradient and camber (consolidated thickness upto maximum 50mm) to make good the cut edges of roads etc, complete all as specified and as directed.
Material and labour for applying evenly a priming/tack coat with bituminous primer @ 5 kg per 10 sqm using paving bitumen of grade VG-10, complete all as specified and as directed.
Material and labour for bituminous premix SDAC (design mix) 40mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG-30 grade any penetration laying with mechanical paver, rolled to an air voids of 4% or lower in the field and compacted to required camber and gradient. Complete all as specified and directed.
Material and labour for Continuous brick edging using full bricks of sub class "B" old size bricks with width equal to the width of bricks laid dry on end vertically including necessary earth work, embedded brick at reqd depth and tamping ground around brick and removal of surplus soil to a distance n. exc 50mtr, complete all as specified and directed.
Material and labour for Painting lines on roads with hot applied thermoplastic compound paint, 10cm width conforming to MORTH specification mechanically applied to form a 1.5mm thick film on road including cleaning and drying the existing road surface to ensure dust, oil, grease and moisture free surface before applying the paint etc, complete all as specified and as directed.
Material and labour for painting/making lines/side lines/zebra lines etc on road pavements and the like of any description exceeding 10cm wide with road marking thermo plastic compound paint confirming to MORTH specifications hot applied with mechanically to form a 1.5mm thick film on road including cleanning and drying the existing road surface to ensure dust, oil, grease and moisutre free surface before applying the paint etc complete all as per manufacturers instruction, complete all as specified and as directed.
Supply & fix dual directional reflective ABS plastic body cat eye at impact resistant plastic stud 100X 100x 19mm double molded solid state having ultra violet resistant color (white/red/yellow) with plastic strip containing 86 beads min retro reflective glass beads at coloured white/yellow/red to be side provided with steel zinc plated nails of dia 12 mm and length 120mm for road by hammering along with epoxy based component system, complete all as specified and directed.
Supply & fix delinators DA 952(GP) of size 700x100x50mm ABS round body fitted with two nos 100mm dia reflective reflectors in white/yellow combination and moulded on MS pipe of 50mm dia duly powdered coated anti rusted theft sheet net,including fixing with concrete block in PCC 1:2:4 type B-1,delinators having average value of coefficient Retro Rfelected luminance cell not be less than 18 med/lux,provided with test certificate, complete all as specified and directed.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base. Use earth obtained from ser item No-01 here-in-before, complete all as specified and directed.
M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 Mpa working pressurecomplete all as specified and directed by Engineer-in-charge.
Material and labour providing PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.
Material and labour for RCC (1:1:5:3) Nominal Mix laid in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc, complete all as specified and directed.
Material and labour RCC (1:1:5:3) Nominal Mix pillars, gates, piers post strut etc, complete all as specified and directed.
Material and labour for form work sides of concrete foundation, footing, bases of coloumn, post in flat rough finished etc, complete all as specified and directed.
All as per iterm No 23 but in pillar, post, piers column etc, complete all as specified and directed.
Material and labour TMT bars 10mm dia, and over (Fe-410-w Gde E-250) in reinforcement, cut to length, bent to shape required, incl. cranking, hooking ends, binding with and including mild steel (annealed) binding wire not less than 0.90mm dia or securing with clips, complete all as specified and directed.
All as per Srl Item No.25 above, but 5 mm to 10 mm dia bars. Spacer and stirrups, complete all as specified and directed.
Supply and fixing Mild Steel framed work (Fe-410-w Gde E-250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.
Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer etc, complete all as specified and directed.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) on column, pillars, and like in cement mortar (1:4) including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick rendering in CM 1:4, complete all as specified and directed.
Supply , laying , jointing and testing XLPE insulated screened armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 Sq mm 4 Core with aluminum thimble of same size, complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 volt AC outdoor type with high pressure die cast alluminium housing and heat resistant complete with driver lamp bracket with impact and corrosin resistant including thermal management in multiple optics complete with IP 65/ 66 protection, complete all as specified and directed.
Supply and fixing steel tubular swaged pole complete with cast iron base plate , finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 mtrs long), complete all as specified and directed.
Material and labour for PVC pipe 15 mm dia for protection of copper conductor flexible from PVC juction box to street light fitting at pole and fixed with clamp, nuts, bolts and washers etc, complete all as specified and directed.
Material and labour for providing Fazilka river sand as in sand cushioning to under ground cable including punning down of sand in layers, complete all as specified and directed.
Material and Labour for old bricks to provide brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10 mm, complete all as specified and directed.
Material and labour cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate for foundation of pole/stay/strut etc, complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate for pole pedestal (PCC) including necessary form work etc, complete all as specified and directed.
Supply, installing, testing and commissioning factory made LT feeder pillar box of size 500 x 500 x 300 mm outdoor type platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having bus bar installed on DMC/Epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 3.15 mm CRCA MS sheet with front opening type with double door shutter and locking arrangement (including provn of lock with 2 keys) with angle iron 25 x 25 x 4 mm powder coated finish (over a coat of red oxide), primer on outside and two coats of red oxide primer on inside surface with TPN aluminium bus bar( in steped manner) of rating not less than 200 Amps on suitable foundation, complete all as specified and directed. Note :- Earth work and foundation are included in this job and as per recommendation of manufacturer.
Material and labour for GI pipe bracket made out of galvanised iron tubing 40 mm bore (dia) light grade, 1.50 metre long bent to shape as per specified for fixing street light fitting, complete all as specified and directed.
Material and labour for street light panel of capacity 40 Amps digital timer box including- (i) Contactor rating 32 Amp 3 Pole/230V (ii) Digital Timer programmable type with IP 54 and internal wiring used with FRLS wire only within built short circuit protection of class H insulation. The Timer Box out door type, mounted on GI angle iron frame of size 25x25x4mm grouted in cement concrete including necessary excavation and earth work, connection of LT UG cable complete all as specified and directed by Engr-in-Charge.
Supply and fixing copper conductor flexible cable with PVC insulator multi-stranded 3 core 1.5sqmm, complete all as specified and directed.
Supply and fixing PVC Juction box pole mounted type of size 280 mm x 170mm x 130 mm having MCB SP 6 Amps with din rail as per IS 11731 Part-II and UL-94 suitable for street light connections fixing arrangement with brass nut bolt, complete all as specified and directed.
M/s Azure Infrastructure Construction Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .