SPL REPAIR TO BLDG NO. NP-07 (URO) AT NORTHERN COMD VEHICLE DEPOT UNDER GE(NORTH) UDHAMPUR

Amount

Demolition of cement concrete (un-reinforced) in any description and in any position, not otherwise provided for and removing the debris to a distance not exc 500 mtr from site, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregrates) as in foors, plinth protection, surface channel, path etc, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame / wooden frame / aluminium frame including punching or drilling out old glazing pins/ spring clips, any type of beading and providing and fixing new ones, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beading in glass panes of any size, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 with using WPC on fair faces of brick work or concrete surface including finishing the surface even and fair without using extra cement, complete all as specified and directed. Note :- Cost for WPC shall be deemed to include in the quoted rates.

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing the surface even and smooth without extra cement, complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint, white or tinted, over and including a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor including skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick plaster in CM 1:6, complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi- corrugated etc.) or CGI sheets in roof coverings including ridges, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with galvanised 8mm dia 'J' hooks or self tapping screws, complete all as specified and directed.

Excavating in post holes (or similar holes), each not exc 0.50 Cum and getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in post holes etc, complete all as specified and directed.

M&L for rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc, confirming to Fe-410-W (Gde-E- 250) Quality 'A', complete all as specified and directed.

S&F false ceiling with everest fiber cement designer tile lvory/ white painted (high pressure steam cured) of 4mm thickness (as per IS-14862) of size 595mm x 595mm and any one of the design (occeanic, lake & hill cascade or electra) in true horizontal level, suspended on interlocking power coated certa black pattern metal grid of hot dipped galvanised steel section (galvanised @12 Grams both side inclusive) consisting of main 'T' runner with suitably spaced joint to get required length and 15x32mm, made of 0.30mm sheet spaced between main 'T' @ 600mm C/C from a ridge of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tile in the grid including required cuttig / making opening for service like diffuser grils light suspended from ciling using GI soffit cleats fixed to existing rafters purlin etc. with dash fastener GI adjustable rod of 3mm dia with galvanised butterfly level clips spaced at 1200mm c/c along main 'T' bottom exposed width of 15mm of all T-sections shall be centre black prepainted with poiyester paint and having a load bearing capicity of 12 Kg/Sqm and re-fixed all existing electric wiring and fixtures, fixed at any height, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel work as in tubular trusses, posts, purlines including special shaped, notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nuts and bolts), providing and fitting angle cleats, gusset plates etc. also for welding, plumbing, truing up and fixing complete washers etc, complete using ERW or induction butt welded tubes, conforming to IS:1161-1979 Grade ST-240, complete all as specified and directed.

M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging and also fastening and fixing, confirming to Fe-410-W (Gde-E- 250) Quality 'A', complete all as specified and directed.

M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer including scraping old paint, complete all as specified and directed.

S&F 1.25mm thick steel rolling shutter without ball bearing but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete, push pull or manual type, complete all as specified and directed.

S&F safety lever locks, mild steel with 4 levers for rolling shutters, complete all as specified and directed.

S&F ball bearing for rolling shutters, complete all as specified and directed.

S&F factory made (box type) mild steel window / ventelators, glazed and gauged combined shutter with side hung including box type hinges, steel peg stay, locking arrangement with glazing and gazing bar dovetailed or welded and one shop coat of red oxide zinc chrome primer, complete all as specified and directed. Notes :- (a) The window / ventilator shall be fabricated as per drg No. CEUZ/TD/1302/2009 sheet 1/3 to 3/3. (b) MS fillets, glazing, wire gauges shall be measured and paid separately under respective items of this BOQ. (c) One side out to out dimensions shall be measured for payment of combined window (glazed & gauged).

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size, confirming to IS:15658-2006 of 80mm thickness (M-40 Grade) and joints filled with sand, complete all as specified and directed.

M&L for sand filling under floors, foundations or under paver blocks including watering and consolidation, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.

S&F 3mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive as in floors, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc, complete all as specified and directed.

Dismantling framed trusses, not exc 10 mtr span, complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5 mtr clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs stones, water troughs and the like including weathering, slightly rounded and chamfered angles and throating, complete all as specified and directed.

M&L for RCC 1:1.5:3 (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts, slab, floors, deck, arch ribs, balconies, chajja, canopies etc, complete all as specified and directed.

Use and waste of formwork to rough finished concrete sides and soffits of floor or roof, roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams, complete all as specified and directed.

Use and waste of formwork to edges of concrete (rough finished) flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work, exc 5cm but not exc 20cm wide, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Taking down carefully the existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturbed surface of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

M&L for point wring for one light / fan point, controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed multistranded copper conductor cable FRLSH and including concealed PVC conduit of 25mm dia medium duty ISI marked including sutiable new steel sunken boxes, laminated sheet cover plate for fixing of switches / sockets as per required point on the board, flush to surface for one light point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLSH connected to common earth dooly complete including cutting, chasing and making good disturbed surfaces of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded copper conductor, medium grade ISI Marked, drwan into and including PVC concealed conduit with all accessories from terminal box to junction of wall and rest of circuit conductor wire drwan into and including suraface PVC rigid non metalic conduit for one ceiling fan point, controlled by one switch with and also including 1.5 Sqmm continious earth wire connected to common earth dolly and including cutting, chasing and making good disturbed surfaces of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

All as per serial item No. 47.00 here-in-above but for one 5 Amps socket outlet on independent board.

All as per serial item No. 47.00 here-in-above but wire size 2.5 Sqmm to controlled the 3 Pin 5/15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm.

All as per serial item No. 47.00 here-in-above but for 3 pin socket outlet 5 Amps on same board.

S&F in replacement 20 Watt LED light fitting, 230 Volts, high quality LED batten with aluminum extrusion housing with PC diffuser, CRI > 80, efficacy : 120 Lm/W, IP-20 complete including connecting up with flexible copper wire of suitable size from ceiling rose to LED, complete all as specified and directed.

S&F industrial type wall air fan of size 24", 3 aluminium 600mm long blade, silent operation, multi colour, 240 Volts, AC, 450mm speed setting 3 Nos, indoor/outdoor type, complete all as specified and directed.

S&F ceiling fan complete with three blade, down rod, accessories, 230 Volts, AC, 1200mm sweep with squirrel cage induction motor, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 5 Amps, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.

S&F switch socket combination, 5 Amps, suitable for 240 Volt, 50 Hz, AC supply, complete all as specified and directed.

S&F switch socket combination, 5/15 Amps, suitable for 240 Volt, 50 Hz, AC supply, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC / polycarbonet isolated body, complete all as specified and directed.

S&F electronic fan regulator, stepped type, 240 Volt, flush type, suitable for 1200/1400mm sweep ceiling fan, complete all as specified and directed.

S&F socket outlet, two in one, 3 Pin, 5 Amps, flush type, complete all as specified and directed.

S&F wall mounted fan, V3 model, silver black, 450mm sweep, 450mm blade size, 90 Watt, speed 1350 RPM, Noice level 63 dB, guard 120 spokes, single Phase, 230 Volt, complete all as specified and directed.

S&F exhaust fan, steel body, AC, single phase, 230 Volts, size 380mm sweep with blades, frame and louvers, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to earth lead wire of Gl wire 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL as in protection pipe and including excavation, earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with RCC cover in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh, connected to earthing test point, complete all as shown in electrical plate No. 3 of SSR Part-l and testing on completion, complete all as specified and directed.

S&F sheet metal VTPN DBs, suitable for 125 Amps, double door, 04 Way (optimum F1+12) with metal door, 415 oVlts grade IP 42 Protection Grade, fixed flush to wall complete including connections should be provide with necessary reducer lugs, complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volt, adjustable type, 125 Amps with breaking capacity 16 KA, complete all as specified and directed.

S&F steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 415 Volts, 50 Hz supply, double door, TPN, 04 ways, complete all as specified and directed.

S&F steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN, 12 ways, complete all as specified and directed.

S&F steel sheet powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door, SPN, 02 ways, complete all as specified and directed.

S&F 3P+N+E enclosure with suitable size plug and socket, complete all as specified and directed.

S&F in replacement MCB of capacity 40 to 100 Amps, 415 Volts, TP/FP, 10 KA, 'B' curve, complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA "B" curve, complete all as specified and directed.

S&F in replacement MCB SP 63 Amps, 240 Volts, rupturing capacity 10 KA "B" curve, complete all as specified and directed.

S&F in replacement MCB SPN 40 to 63 Amps, 240 Volts, rupturing capacity 10 KA "B" curve, complete all as specified and directed.

S&F in replacement MCB of capacity 16 to 32 Amps, 415 Volts, TP/FP, 10 KA, 'B' curve, complete all as specified and directed.

S&F energy saving, environment friendly, pressure die cast, aluminium housing with PC lens cover & mounting eye bolt with IP-65, lumens efficacy not less then 125 Ln/W, High bay LED of 50 Watt with high efficacy & lower power consumption delivers high brightness & excellent illumination with high efficiency long life LED complete making connection, complete all as specified and directed.

S&F energy saving, environment friendly, pressure die casted aluminium with toughened glass potted driver with IP-66, lumens efficacy not less then 125 Ln/W, flash LED flood light with lens of 70 Watt with high efficacy & lower power consumption, delivers high brightness & excellent illumination with high efficiency long life complete making connection, complete all as specified and directed.

M&L for submain wiring with three run single core 10.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia PVC concealed conduit, heavy duty, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 10.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete all as specified and directed. Note :- Three run of 10.0 Sqmm and one run 10.0 Sqmm cable and one run of PVC conduit shall be measured as one unit/RM.

M&L for submain wiring with two run single core 6.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia PVC concealed conduit, heavy duty, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit shall be measured as one unit/RM.

M&L for submain wiring with two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia PVC concealed conduit, heavy duty, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit shall be measured as one unit/RM.

M&L for submain wiring with two run single core 2.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia PVC concealed conduit, heavy duty, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete all as specified and directed. Note :- Two run of 2.5 Sqmm and one run 2.5 Sqmm cable and one run of PVC conduit shall be measured as one unit/RM.

S&F 35 Watt building security light fitting, 125 Lm/W, 230 Volts, AC, outdoor type, made of pressure die cast aluminum hosing with modular lens, heat resistant with potted driver having efficacy with IP-66 complete alongwith suitable size bracket, nuts, bolts and clamps for fixing of LED building security light, complete all as specified and directed.

Supplying, laying/fixing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty), 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4.0 Core, laid in trenches/ floor/ pole/ thorugh GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match the existing and including taking out/down existing cable of any type, complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr deep and not exc 1.5 mtr wide for laying of under ground cable, pipes etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for dry sand cushioning to underground cables with a layer of sand 8cm thick before laying the cable and 15cm thick after laying cable and stretching the cable, complete all as specified and directed.

Supply and laying old size brick, Class ‘B’ covering as mechanical protection to underground cable with well burnt, complete all as specified and directed.

M&L for 40mm bore GI tubing, light grade with all fitting and laid in floor or fixed to wall/ pole with and including MS clamps of suitable size, complete all as specified and directed.

S&F on load changeover switch, 4 pole, 415 Volts in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

KUMAR CONSTRUCTION CO (BID ID -3413076)

SHIVAE CONSTRUCTION (BID ID -3412089)

M/S GURU DEV BUILDERS (BID ID -3415474)

M/S VINAY KUMAR SHARMA (BID ID -3414560)

paras ram pachiala (BID ID -3408263)

MAHAJAN TRADING CO (BID ID -3406145)