Special repair to Toilets and adjoining sewage line alongwith soakage pit at Bldg No P-24 of MH under GE(A) Suratgarh at Mil Stn Suratgarh

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L for joint free non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for glazed ceramic tiles, coloured,300x600x7 to 8 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge.

S& F 35 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-Charge including supply and fixing following items :- (a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf. (b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf. (c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf. (e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf.

S& F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed by Engineer-in-Charge including supply and fixing following items :- (a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 3 Nos per leaf. (b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf. (c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.

S&F Aluminium frame for doors, window with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements to fix guard bars and S&F of PVC sleeves for guard bars. Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and including taking down old window/ ventilator and complete all as specified and as directed by Engineer-in-Charge.

S&F metalic louvers slits to hold glass strip of size 300x500 mm with including arrangement of fixing glass pinhead as per size & louvers ventilator (Glass shall be measurement separately) complete all as specified and as directed by Engineer-in-Charge.

S&F sheet glass, ordinary quality 5.5 mm thick fixed with aluminium window frame with glazing clip and rubber beeding complete all as specified and as directed by Engineer-in-Charge.

M&L for 5.0 mm thick figured glass fix with aluminium frame with glazing clip and rubber beeding complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge.

M & L 15 mm thick rendering on fair faces of brick walls in CM 1:6 , finished fair & smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M & L for 5 mm thick rendering on fair faces of ceiling in CM 1:3 , finished fair & smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer of acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed by Engr -in - charge.

M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer of acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed by Engr -in - charge.

Supply & fixing in repair vitreous china premium/1st quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc with & including WC seat cover closed pattern symphonic action type twin flush flushing cistern of 10 litre capacity with lid , incl CP jet spray necessary fitting complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Health faucets of made of stainless steel connected for EWC/Wall hung WC complete all as specified and as directed by Engineer-in-Charge.

M&L for water proofing treatment of sunken floor of WCs bathroom etc by applying of the following specifiaction:-(i) Cleaning of sunken floor surface with mechanical means i.e wire brush/air blower etc and remove all loose/unsound material dirt dust etc. (ii)Applying cement slurry mixed with acrylic based polymer modified cementious composite compund coating Hydroproof Xtra of FOSROC /Equivalent of Dr Fixit of Pidilite industries Ltd in the ratio 1:2:4 (one part of acrylic polymer : two part of water and four partof cement) (iiii) First layer of cement slurry @0.444 kg /sqm mixed with acrylic based modified cementious composite compund @0.222 litre/sqm and allow it to air dry for 4 hour. (iv) Second layer of cement slurry @0.222 kg /sqm mixed with acrylic based dified cementious composite compound @0.111 litre/sqm and allow it to air dry for 4 hour followed with water curing for 48 hours (v) 200 micron thick polytgen film shall be pasted with help of adhesive over treatment . Note:- Joints of WC/Trap/Soil waste shall be prperly sealed with sealing compund . Testing of all traps and joints and sunken slab shall be done as per IS-1742 before filling and tiling work.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (encluding connecting pipe and all necessary joint) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous- Vitreous China wash down water closet pan (pedestal pattern), white (encluding fixing bolts all necessary accessories) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC valveless, syphonic action type, low level flushing cistern 10 ltr capacity white, with inlet, ball valve, float including brackets and flush pipe 32mm dia connections to pipe PVC connection 450 mm long an fixing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Wash hand basin angle back 450x300 mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32 mm bore and waste pipe complete all as specified and as directed by Engineer-in-Charge.

S& F 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32 mm-260 gms/40 mm-270 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous china urinals, Half stall type, white bowl type (back or corner wall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe , grating and union for discharge pipe including waste pipe and trap. (excluding flushing cistern ) complete all as specified and as directed by Engineer-in-Charge.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connections with fittings such as stop cock bib cock etc including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing and connections with fittings such as stop cock ‘bib cock etc including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge.

S&F 20 mm outer dia CPVC pipes Plain CPVC SDR 11 fittings in walls complete all as specified and as directed by Engineer-in-Charge.

S&F 25 mm outer dia CPVC pipes Plain CPVC SDR 11 fittings in walls complete all as specified and as directed by Engineer-in-Charge.

S&F 20 mm outer dia CPVC Brass Elbow fittings complete all as specified and as directed by Engineer-in-Charge.

S&F 25 mm outer dia CPVC Brass Male Brass Threaded Adaptor (MTA/ MBTA) fittings complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm bore cast copper alloy, bib tap with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm bore pillar taps , cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs brass chromium plated shower rose, 125 mm sise with swivel joint complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs stop valve cast copper alloy concealed , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15 mm dia, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15 mm bore two- in- one bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15 mm bore, 450 mm long PVC connection with PTMT nuts complete all as specified and as directed by Engineer-in-Charge.

S&F grating doom CP 100 mm dia of plated with waste hole complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.

S & F in repair tubular towel rail brass chromium plated 20 mm dia and 60 cm long complete all as specified and as directed by Engineer-in-Charge.

Dismantling 100 mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge.

Dismantling 75 mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed by Engineer-in-Charge.

Taking down eaves gutters and rain water pipe (any size or any pattern) including all fittings, heads, shoes, bends, swan necks etc (measured over all as fixed along the central line over fittings and accessories) complete all as specified and as directed by Engineer-in-Charge.

S & F PVC (SWR) pipes bore 110 mm single socketed in any length with rubber ring joints fixed to walls including including low carbon hot roll gauge corrected oil pickled & drawn pipe supporting clamping system 32x3 mm with rib and notch are hot dip galvanised and Zn, Al flake coating with necessary clamps to fix and hold pipe complete all as specified and as directed by Engineer-in-Charge. (Note: Detail of Pipe supporting system is all as per Drg NO -BTD-916).

S&F PVC (SWR) pipes bore 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) bends any radius bore 110 mm provided with access door complete all as specified and as directed by Engineer-in-Charge.

S & F PVC (SWR) pipes bore 75 mm single socketed in any length with rubber ring joints fixed to walls including supporting clamp including low carbon hot roll gauge corrected oil pickled & drawn pipe supporting clamping system 32x3mm with rib and notch are hot dip galvanised and Zn, Al flake coating with necessary clamps to fix and hold pipe complete all as specified and as directed by Engineer-in-Charge. (Note: Detail of Pipe supporting system is all as per Drg NO -BTD-916).

S&F PVC (SWR) pipes bore 75 mm single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed by Engineer-in-Charge.

S & F PVC (SWR) bends any radius bore 75 mm provided with access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) junction single, (Single T) equal or unequal bore 75 mm provided with access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) junction single, (Single T) equal or unequal bore 110 mm provided with access door complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) reducers 110 mm to 75 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs PVC (SWR) vent cowl bore 75 mm complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n exe 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-Charge.

M & L for excavating over areas of any type of soil, n exc 1.5 m deep and getting out complete all as specified and as directed by Engineer-in-Charge.

Returning filling in trenches incl spreading, levelling, watering, & well ramming in layers not exc 25 cm thick complete all as specified and directed, in soil complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.

S&F DWC HDPE pipe internal dia 150 mm Stiffness Class SN 8 , along with necessary jointing materials collars/ couplers/ tees / union/ socket rings etc laid, jointed and tested complete as per IS 16098 Part 2 specifications complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L for precast cement concrete block masonery with solid block as exc 10 cm in width and setting in cement mortar 1:4 type C1 1:3:6 (20 mm graded aggregate ) complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on block masonry surfaces of manhole finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in CM 1:6 on block masonry surfaces of manhole finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately) complete all as specified and as directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc complete all as specified and as directed by Engineer-in-Charge.

M&L for precast cover slab in cement concrete 1:2:4 type B1 (20mm graded stone aggregate) lncuding necessary forms moulds etc complete all as specified and as directed by Engineer-in-Charge.

M&L for removal of excavated material to distance exc 1.5 Km but n.exc 5 Km complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting into existing manholes for connecting new drains of 150 mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.

M&L for construction of Septic Tank for 50 users, brick construction, complete, all as specified and shown on drawings (BTD-016 Sheet No. 1/3 to 3/3) complete all as specified and as directed by Engineer-in-Charge.

M&L for construction of Soak Well for 50users, using 345mm brick masonry instead of 300mm rubble masonry as shown in drawings, complete, all as specified and shown on drawings (BTD-804 Sheet No. 1/1) complete all as specified and as directed by Engineer-in-Charge.

M&L for 16 to 18 mm thick Granite (south) slab of approved shade as in flooring, platform,vertically fixing for view cutting etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding over and edge should be nosing as required & including 15 mm thick screed bed (bedding layer) in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, earth plug, lamp, street light etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge.

M&L for Point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded sheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 20mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls for conduits and for sunken pressed steel terminal boxes and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer for mounting switches, sockets, fan regulator including suitable size modular plates fixed flush with wall including 2.5 Sqmm PVC insulated multistranded sheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for one light point / fan point controlled by one switch complete all as specified and as directed by Engineer-in-charge for the following points:-

One light/fan/exhaust fan controlled by one way switch.

One light point controlled by two 2 - way switches .

One 3 Pin 5 Amp socket outlet on same board with other switches.

One 3 Pin 5 Amp socket outlet on independent board.

M&L for Point wiring complete with 2.5 Sqmm (nominal cross section area) FRLSH PVC insulated multistranded sheathed copper conductor cable drawn in and including concealed PVC rigid conduit medium grade 25mm dia, pipe hooks, elbows, junction covers and junction boxes including cutting chases in walls for conduits and for sunken pressed steel terminal boxes and making good the disturbed surfaces of wall with all jointing accessories including provision of pressed steel sunken terminal boxes made of 1.2mm thick pressed steel sheet, 60mm deep of suitable length and painted with red oxide primer for mounting switches, sockets, fan regulator including suitable size modular plates fixed flush with wall including 2.5 Sqmm PVC insulated multistranded sheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly for One 3 Pin 15/16 Amp socket outlet on independent board & Metal Plug controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

S&F Switch piano 6 Amps single pole, one way complete all as specified and as directed by Engineer-in-charge.

S&F Switch piano 6 Amps single pole, Two way complete all as specified and as directed by Engineer-in-charge.

S&F Switch piano Flush type 16 Amps single pole, one way, complete all as specified and as directed by Engineer-in-charge.

S&F socket flush type 2 / 3 pin, 6 Amps, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F socket flush type 6 Pin, 6/16 Amps, 230 volts complete all as specified and as directed by Engineer-in-charge.

S&F in repair / replacement electronic fan regulator suitable for ceiling fan for 1200mm / 1400mm sweep, socket size, rotary type complete all as specified and as directed by Engineer-in-charge.

S&F sheet metal plug & socket DB, SP, with a two pin and earth plug with socket, 230 Volts with & including one MCB SP ‘C’ Curve 10 kA, 20 Amps complete all as specified and as directed by Engineer-in-charge.

S&F ceiling rose 65mm X 50 mm two or three terminals complete all as specified and as directed by Engineer-in-charge.

S&F as in repair flush mounting factory made SPN DB 4 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and as directed by Engineer-in-charge.

S&F MCB 32 - 40 Amps, Single Pole & neutral 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and as directed by Engineer-in-charge.

S&F MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and as directed by Engineer-in-charge.

S & F Energy efficient decorative ultra slim, prewired, Endura linear new 10 Watt LED light fitting (Mrror Light) (Day Cool Light) batten type with Drive & polycarbonate housing & complete with all accessories complete all as specified and as directed by Engineer-in-charge.

S & F Energy efficient decorative ultra slim, prewired, Limiline 20W LED, Light fitting (day Cool Light) batten type with Drive & polycarbonate housing & complete with all accessories complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp uitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-charge.

Disconnecting & taking down old unsv exhaust fan of any make and type and depositing to AGE E/M Yard and Supply & fix new exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed by Engineer-in-charge.

Disconnecting & taking down old unsv Electric Water Heater Storage (Geyser) of any make and type and depositing to AGE E/M Yard Supply and fix new electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection incl PVC conncetion Pipe complete all as specified and as directed by Engineer-in-charge.

S&F as in replacement Sub main wiring complete with 2 single core 6 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 25mm dia concealed including single core multistranded copper conductor 6 Sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and as directed by Engineer-in-charge. Note : Two runs of 6 Sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.

Please Enable Macros to View BoQ information