Providing National Flag Hoisting Pedestal at Vellore Corporation Main Office Building Campus in Ward No.40 , Zone - IV in Vellore Corporation

Amount

Dismantling the Existing Brick Masonry in Cement Mortar under 3 m high including cost of all labour and material charges etc., complete as per standard specifications W-0015 -PWD SoR 2024-25

Removal of Excavated Excess Earth away from the site to 5 KM including loading and transportation charges etc, complete as per standard specification

Earthwork excavation in all soils and sub-soils with in the initial lead and lift except hard rock required blastering including cost of side shuttering strutting showering of water if necessary and refill the earth in sides of foundation etc complete as per std specifications (Drain works)

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver oak (C.w) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced at 75 cm c/c) complying with standard specification and as directed (Grade Beam)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Brickwork in CM 1:5 (One Cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" x 43/8"x 2 3/4" including finishing, curing, etc., complete complying with standard specification

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Plastering with cement mortar 1:5 mix, 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats for Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Dadooing Supplying and laying in flooring with fully polished Synthetic Ruby Red or Raw Silk 1200mm x 600mm, 16mm to 18mm Thick in size laid in Cement mortar 1:2 (One Cement and two Plastering sand) 20mm thick & pointed with same colour of cement etc., complete as per standard specification

Supply, Erection of 8m 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron

C N RAJA SRINIVASAN (BID ID -1418242)