Composite work (Civil & Electrical Genl) for setting up of Quick coach watering system at koteganguru yard.

K-Electrical items

Platform surface/concrete/Road cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of soil and re-plastering of excavated trench with cement on the PF's to bring original shape.

Excavation of cable trench below the Rail track/road crossing 450 mm wide and 1000 mm. deep in all types of soil and refilling the released ballast.

Excavation of cable trench, 450 mm. wide and 1000 mm. deepin all types of soil and refilling the cable trench to original shape by excavated soil free from unwanted materials.

Excavation of Trenchless duct using horizontal drilling in all types of soil for laying of LTUG/HTUG cable across the track/road.

Supply and laying of HDPE Pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables. Including all the ends shouldl be sealing with bituminous compound.

Supply and laying of HDPE pipe of dia 110 mm grade PE-100 with pressure of PN 8 for 2 safety of cables. Including all the ends shouldl be sealing with bituminous compound.

Transportation ,Laying of 4x16 - 35 Sq mm LTUG cable with aluminium conductor 2 including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc (Cable will be supplied by SSE/E/Stores/CN/BNC)

Transportation ,Laying of 4 x 50-240 Sq mm LTUG cable with aluminium conductor 2 including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc.(Cable will be supplied by SSE/E/Stores/CN/BNC)

"Transportation ,Laying of one number PVC insulated and PVC sheathed / XLPE power 2 cable of 1.1 KV grade of above 185 sq. mm and upto 400 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.(Cable will be supplied by SSE/E/Stores/CN/BNC)"

"Transportation ,Laying and fixing of one number PVC insulated and PVC sheathed / 2 XLPE power cable of 1.1 KV grade of Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) size on wall surface as required.(Cable will be supplied by SSE/E/Stores/CN/BNC)"

Design, Supply, fixing and commissioning of 12 Way SPN Double Door Distribution 2 Board with following switchgears (All 'C' Series ) incommer 40 A SPN RCBO sensitivity 30 mA-1 No.s and out going SP MCB 6-32A 10 Ka - 10 No.s with required suitable hardware and internal wiring complete.

L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, 2 soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting eath pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete.

Supply and provision of Cast iron LT/HT cable route markers with dia 100 mm including stand and other necessary items complete as per the instructions of Railway representative at site. 1106798.7

Supply and commissioning of Pump set of 3 pump each having 60 HP Flow 320 2 m3/hr, Head 35m, centrifugal/in-line vertical pump with Mechanical seal, Electric Motor Motor & Pump should be of standard manufacturer such as M/s Kirloskar, CGL, Shakti Pump, Siemens, ABB, Wilo including Base Plate coupling, coupling Guard and Set of Foundation Bolts. Insulation Class H and efficiency of IE3 or higher.as per Techical spec(.Before supply the items prior approval to be taken by Dy.CEE/CN/BNC.)

Provision of suitable Civil Foundation of Pump & Common Skid Mounting for 3 no of Pumps 60 HP capacity and as instructed by Engineer incharge of the work.

Design , Manufacture, supply, erection, testing & commissioning of free standing floor mounted, PLC based control panel suitable for 3 Nos. Pumps (minimum 45KW) panel made up of 14SWG CRCA (Cold Rolled Carbon Annealed) sheet after seven tank process and painting with EPOXY powder coating suitable for 3 Phase, 4 wire 415 Volts, AC supply system for comprising with: (i) Incoming 400 A with CTR 400/5 A 4 P, 35 KA B/C, Microprocessor based Adjustable MCCB = 01 No. (ii) Outgoing 125 A with CTR 125/5 A 4P 35 KA B/C, Microprocessor based Adjustable MCCB= 03 No. (iii) Outgoing 32 A 4P 10 KA B/C, B type MCB= 02 No.(iv) Heavy duty Variable Frequency Drive (VFD) suitable for minimum 45 KW Pump=3 Nos.(v) 15KVAR Heavy Duty Capacitor=3 No.(vi) Set 2 /Individual Electronic Motor Protection Relay for provision of adequate protection against single phasing, under voltage, over-voltage, earth leakage, overload, dry run protection etc.=3 set (vii) Multifunction Meters for measuring (Parameters: V, A, F, PF, kW, kVA, kVAR, kWh, kVAh, kVARh, Runhours, On hours, Phase angle, Interrupts, THD, Events (High-Low), Neutral Current, K Factor) along with suitable ratios CTs(Current transformer) = each incoming & outgoing =4 setThe panel shall be complete with 400A Copper Bus Bars for Phases and 200A for Neutral as per drawing approved by Railways. The panel shall have LED indication light for each incoming & Outgoing shall be available for phase indication, voltage, current, ON/OFF. as per Techical spec(.Before supply the items prior approval to be taken by Dy.CEE/CN/BNC.)

Supply and commissioning of copper shielded cable of 6 core 1.5 sq.mm for flow meter valve & butter fly valve wiring

Supply and commissioning of SCADA & COMMUNICATION, DATA ANNALZER , With LED MOINTOR of 32 " or heigher With P.C. and Printer for Report Generation including UPS as per specifications.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/ coke and salt ) as required.

Supply and Fixing of GI pipe 'B' class of dia 50 mm. for cable rising & protection including clamping, fixing arangements and sealing with bituminous compound.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (with charcoal/ coke and salt ) as required.

DG Earthing-Connections with 40x6mm copper strip in 50mm dia G.I. pipe class-B, 300 mm deep in ground/recessing in floor from earth electrode strip to neutral of transformer/alternator as per drawing and technical specification. including supply of material

DG Earthing-Connection with 40x10mm GI strip 300mm deep in ground/recessing in 2 floor/clamping in Trenches of sub station by grouting clamps manufactured with MS sheet 14 SWG, from earth electrode strip to HT panel/LT panel/AMF panel/Transformer/DG set etc. as per approved drawing and technical specification including supply of material.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire 2 X 6 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable insurface /concealed medium class PVC conduit/casing capping as required as per CPWD Standard.

Wiring for circuit/ submain wiring alongwith earth wire 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable insurface /concealed medium class PVC conduit as required as per CPWD Standard

Wiring for circuit/ submain wiring alongwith earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface /concealed medium class PVC conduit as required as per CPWD Standard.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 3 runs of 1.5 2 sq.mm FRLSH PVC insulated copper conductor single core cable in surface /concealed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable etc. as required as per CPWD Standard.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6 A separate modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 15/16 A modular socket outlet and 15/16 A separate modular switch, connections etc. as required.

Supply, fixing, testing and commissioning of 22 watt 6500k batten 4 feet length LED lighting fixture as per specification SWR/LED LIGHT FITTING(Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. Including all other required accessories complete.

Supply, fixing, testing and commissioning of 10 watt, 2 feet, 6500 k LED batten fixtures Including all other required accessories complete.

Supply, Fixing, testing and commissioning of BLDC ceiling fan 26 W, BEE 5 star rated with remote 1200 mm size with warranty for 5 years suitable to work for 230 V, 50 HZ single phase supply.

Supply, fixing and comissioning of 200 mm size BLDC Ventilating fan complete.

Supply, fixing, testing and commissioning of 45 watt 6500k LED street light fixtures as per specification SWR/LED LIGHT FITTING (Indoor/outdoor) /001-2016 effective from 18.04.2016 or latest.). Including suitable size pipe bracket and hardware complete.

Supply and provision of submersible Horizontal mono block pump to be installed in sump suitable for 415 V three phase supply 15 HP capacity 5 star rated.

Supply, installation, testing and commissioning of control panel for 15 HP mono-block submersible pump.

Supply and provision of Three Phase Submersible Pump Set 5.5 kilo watt / 7.5 HP similar as Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC- 511687794929829 dt.09/01/2025.

Supply and provision of Micro controller based Digital type Direct On Line starter 2 panel suitable for 5HP to 7.5HP, 3Phase submersible pump consists of 16A Contactor - 1No, Digital voltmeter and ammeter, Dry running protection, Single Phasing Preventer and over load protection, ON/OFF push buttons, Phase indication lamps - 3Nos. (Warranty Period : Upto 12 months from the date of delivery.)

Supply and provision of heavy duty uPVC column pipe coupler of 50 mm dia, pressure 27 kg/cm2 with colllars and other required suitable acessories complete.

Supply and provision of 3 core 6 sqmm PVC Flat Cable, Copper conductor with PVC 2 Insulation and sheath for working voltages up to and including 1100 Volts, Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687741102546 dt.07/01/2025.

Supply, erection, testing & commissioning of Steel such as MS Channel, Flat, Angles with nuts & bolts washer of suitable size for various work of any item.

M-Non-DSR & Non USSOR items

Supply and commissioning of Digital flow meter with wiring with all contractor tools and plants, labours, transportation, loading and unloading complete as directed by the engineer in charge

"Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts 3 including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. "For Grade PE 100 PN 8.0: HDPE Grade PE100- PN8.0,200mm dia

Supply and commissioning of GI pipe for Hydrant line of 200 mm dia with all contractor tools and plants ,labours, transportation, loading and unloading complete as directed by the engineer in charge

" Supply and commissioning of Hydrant valve 50 mm with all contractor tools and plants, labours, transportation, loading and unloading complete as directed by the engineer in charge"

"Supply and commissioning of Nipple with reducer 50 mm to 28mm with all contractor tools and plants, labours, transportation, loading and unloading complete as directed by the engineer in charge"

Supply and commissioning of one butterfly valve of 300 mm with all contractor tools and plants, labours, transportation, loading and unloading complete as directed by the engineer in charge

Supply and commissioning of GI/MS Distribution inlet Header Size 500 mm Dia Length 6 mtrs at Suction End Having one Inlet of 300 mm and Three outlet 200 mm. dia to Connect Feeding Line, Wth Fittings, Including Flange Packing and nut Bolts.

Track crossing of pipe with casing pipe of suitable size of pipe.Considering one track 3 width of 3 meters. If no of track is more same may be increased accordingly with all contractor tools and plants, labours, transportation, loading and unloading complete as directed by the engineer in charge

Supply and commissioning of Gl pipeline of 300mm from OHTtank to supply header with all contractor tools and plants,labours, transportation, loadingand unloading complete usdirected by the engineer incharge

Supply and commissioning of one Basket strainer of 300 mmwith all contractor tools andplants, labours, transportation,loading and unloading completeas directed by the engineer incharge

Supply and commissioning of Hydro pneumatic tank 500 literswith fittings with all contractortools and plants, labours,transportation, loading andunloading complete as directed by the engineer in charge

Supply, Installation, testing and commissioning of 200 mm electrically operated 3 butterflyvalve to be Installed beforeconnection to the Hydrant Linewith all contractor tools andplants, labours, transportation,loading and unloading completeas directed by the engineer incharge

Supply and commissioning of MS 200mm pipe with flange, nutbolt or welded with all contractortools and plants.labonars,transportation, loading andunloading complete as directed by the engineer in charge

Supply and commissioning of MS socket 50 mm with all contractortools and plants, labours,transportation, loading andunloading complete as directedby the engineer in charge

Supply and commissioning of Nipple 50 mm, 75mm length,both sides threded with allcontractor tools and plants,labours, transportation, loadingand unloading complete asdirected by the engineer incharge

Supply and commissioning of Hose clip of suitable size with allcontractor tools and plants,labours, transportation, loadingand unloading. complete usdirected by the engineer incharge

Supply and commissioning of TPU water filling pipe as perspecification ID 31.5mmthickness of 2.25mm (Each pipelength 2 meters) with allcontractor tools and plants,labours,transportation, loadingand unloading complete asdirected by the engineer incharge

Providing and fixingMS/GI/Fabricated speceres likeTee Enlarger, Reducer, spool with all contractor tools and plants,labours, transportation, loadingand unloading complete asdirected by the engineer incharge

Providing and fixing of 50 mm air release valve to be installedin hydrant pipe line with fittingswith all contractor tools andplants, labours; transportation, loading and unloading completeas directed by the engineer Incharge

Supply and commissioning of three Butter fly valve 200mm dia with allcontractor tools and plants,labours, transportation, loading and unloading complete asdirected by the engineer incharge. 4724425.0

"Providing and supplying of factory manufactured FRP (Fiber Reinforced Plastic) sectional/modular water storage tank having total storage capacity of 2,50,000 litres (250 KL) suitable for potable/raw water storage, conforming to relevant IS standards and manufacturer specifications, including design for hydrostatic pressure, wind load and seismic conditions as applicable. The work shall include: Design, fabrication, supply, transportation, unloading, shifting to 3 site, erection and commissioning of FRP tank complete in all respects. Providing and fixing of all inlet, outlet, overflow, scour/drain, vent and interconnecting pipe lines of suitable diameter with necessary bends, tees, flanges, unions, valves, puddle flanges and specials. Providing and fixing of internal and external ladder, manhole cover, level indicator, air vent, mosquito proof screen, hand railing and walkway wherever required. All contractor's materials, labour, T&P (tools and plants), lifting equipment, staging/scaffolding, consumables and skilled manpower required for complete execution of work. Testing of tank for water tightness and leak proof performance. Making all necessary connections to the existing/proposed pipe network and ensuring proper functioning."

Item Breakup - A-DSR items