COMPREHENSIVE REPAIR TO CERTAIN B/R WORKS WITH MISC REPAIR WORK EXTENSIVE BUILDING IN OFFRS AREA INCLUDING OFFRS MESS UNDER AGE B/R-II NEW CANTT (WEST) PRAYAGRAJ.

Amount

Dismantling of AC sheet corrugated/semi corrugted sheets in wall cladding or in roof covering, complete all as specified and directed.

M&L for 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

Fixing only 6mm thick Asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts, complete all as specified and directed. Note:- Serviceable AC sheets retrieved from dismantling shall be used.

S&F 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc, complete all as specified and directed

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins, ms tubes where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering, complete all as specified and directed

M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed

M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Cutting holes of superficial area not exc 100 sq cm into or through cement concrete slabs chajjas,etc reinforced if reinforce ment is cutting through

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in Chajjas , landing, balconies, canopies, desk slab and in shelves etc, complete all as specified and directed.

Use and waste for form work to chhajjas , racks stabs, lintel or similar work for fair finished surfaces, horizonal etc complete all as specified and directed

S&F mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends land binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified directed

All as per item No. 13 above but 6 to 8mm dia.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises, complete all as specified and directed.

S&F joint free non skid Ceramic tiles, 7 to 8mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for joint free non skid, ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete of item all as directed.

All as per item No. 17 as above but on wall for skirting etc. over a 10mm backing layer of CM 1:4, complete all as specified and directed.

M&L for joint free vitrified ceramic tiles of 7 to 8mm thick area of each tile and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

All as per item No. 19 as above but on wall for skirting etc. over a 10mm thick backing layer of CM 1:4, complete all as specified and directed.

M&L for joint free double charged vitrified ceramic tiles of 7 to 8mm thick area of each tile n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 600X300X6-7mm thick /450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

M&L for first or premium quality heavy duty pavement tiles 300mmX300mmX10mm/ 400mmX400mmX10mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Granite 15-18mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M&L for Granite 15-18mm thick (of any type) work (table rubbed and polilshed)for wall lining (veneering to wall) in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for Marble work (Green marble)12 to 15mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over & including 15mm thick screed bed in CM 1:4 complete including making grooves if the marble provided on the step, complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down, complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down, complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down, complete all as specified and directed.

Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors including taking down, complete all as specified and directed.

Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors including taking down, complete all as specified and directed.

Refixing old 25 mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors including taking down, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing, waste fitting etc complete all as specified and directed.

S&F in repair vitreous china counter top wash basin sunk type, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china table top wash basin, white, of size 480 X 370mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, swan neck type quarter turn , fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair Brass CP central hole mixer quarter turn for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB, complete all as specified and directed.

S&F in repair CP Stop valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle quarter turn screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup, high pressure crutch or butter fly handle quarter turn screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (white colour) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs ( white colour) capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and directed.

S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified and directed.

S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm, complete all as specified and directed.

S&F in repairs wall mixers with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed

S&F in repairs wall mixers for sink with wall flanges complete all as specified and directed

S&F float Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs float Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs Ball Valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and directed

S&F in repair for grating doom 100 mm dia of stainless steel, complete all as specified and directed.

S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair Bib tap standard of PTMT 15mm bore any colour high pressure screwed for iron pipe and fixed complete all as spfd and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm with access door, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm with access door, complete all as specified and directed.

Running welding in repair thickness of metal to be welded Exc 6 mm but n.exc 9mm, complete all as specified and directed.

M&L for water proofing treatment to sunken floor with polymeric water proofing membrane after cleaning the surface by wire brushes,brooming,removing dust and applying treatment as under :- (a) M&L Plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.50 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction. (e) M&L for for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proffing membrance @ 1.20 Kg/sqm. (f) M&L for blending of course dry sand @ 0.75 KG/Sqm

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling, waste pipe and CP spreader with connected fittings complete, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan with attached flushing cistern (Pedestal pattern) single piece with 'P' or 'S' trap white , including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and PTMT hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan, complete all as specified and directed.

S&F in repair plastic water closet seat cover for single piece WC, white, complete all as specified and directed.

S&F in repair for flush kit for cistern complete all as specified and directed.

S&F in repair for flush kit for Single piece WC complete all as specified and directed.

S&F in replacement of CP telescopic channel of size exc 45cm but n.exc 50cm long, heavy duty to match with existing size and shape complete all as specified and directed.

S&F rubber door seal 5mm thick,32mm wide, with Aluminium strip of size 19mm thick fixed with machine steel screw with washer complete all as specified and directed

Demolition of brick work built in cement mortar or cement lime mortar, complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6), complete all as specified and directed.

All as per item No. 73 but except brick (brick used obtained from demolition), complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed.

M&L for 15mm thick rendering (including taking down) on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering (including taking down) on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering (including taking down) on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.

M&L for applying 1 to 2mm thick wall care putty (weatherproof or as applicable) on wall or ceiling, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and directed.

M&L for applying for preparing new plastered un-decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of wall complete all as specified and directed.

M&L for preparation and complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.

M&L for complete removal of existing finishes of wall including cornices etc and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 4 years of performance warranty by manufacturer, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 92 as above but of Frame size 65 x 125 mm.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

M&L for PCC 1:3:6 type C-1 using (20mm graded crushed stone aggregate) as in bed blocks for hold fast,Coping errection of posts etc complete all as specified & directed.

M&L for mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction , manufacturer's specification & drawings, complete all as specified and directed.

S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

S&F casement windows with net & grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash million having 50X64X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50X85X2.5mm UPVC section reinforced and welded in corners with EDPM gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. Mosquito mesh shutter is made out of UPVC extruded section of 61X27X2mm with GI channel of 1.2mm thick, welded in corners. Mosquito net of GI is filled in shutter with proper required accessories like hinges,MS grill of 12mm square MS bar are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and directed. Note:- Glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately.

All as per item No. 102 as above but sliding window two or more track as per site requirements.

S&F UPVC ventiliators made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash mullion having 50X75X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 60X75X2.5mm UPVC section reinforced and welded in corners with TPE gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. with MS grill of 12mm thick round shape are fabricated as per manufacturer and installed in UPVC frame section of 35X35X2mm by drilling and surveying system complete all as specfied and directed. Note:- Glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately.

S&F Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded, complete all as specified and directed.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded, complete all as specified and directed.

S&F factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet, complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F 12mm thick Milky white frosted toughened glass with etching for making good any surface/wall door etc including necessary fittings, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof including of Brass CP 450mm long handles, suitable magnet to hold shutters etc, complete all as specified and directed.

S&F Powder coated aluminium frame for partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repair aluminium anodised Grill of size 75 x 75x 4mm thick for windows , including joining cleat, anodized aluminum strip beading screw complete all as specified & directed.

M&L for applying two coats of synthetic enamel paint on new or old untreated wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new or old untreated steel surfaces , over 10 cm in width or grith not other wise described,complete all as specified and directed.

S&F for galvanised MS Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F in repair for galvanised MS Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple, complete all as specified and directed.

S&F fabrication in repair cupboard/wardrobe made out of 16 to 18mm thick PVC board plain sheet complete all as specified and directed

S&F fabrication in repair cupboard/wardrobe made out of 16 to 18mm thick PVC board laminated sheet complete all as specified and directed

S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F for 5.5mm thick sheet glass ordinary quality and glazing with rubber beading/gaskit in square exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair 25mm dia SS , curtain rails/ drapery rod including end brackets and end knobs of any shape and design as approved, complete all as specified and directed.

S&F in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed. Make:- Godrej/Link

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F 300mm long SS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple, complete all as specified and directed.

S&F SS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F SS 150 mm pressed handles oval type stove enamelled black complete all as specified & directed.

S&F for SS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium ally, complete all as specified and directed.

S&F in repair SS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F in repair SS handles 150 mm long fabricated type complete all as specified & directed.

S&F in repair SS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. Note:- The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F 10mm thick plaster of paris ceiling(Gypsum false ceiling) to flat/curved surfaces including sunk or raised moulding with POP and finishing complete all as specified over GI frame work including all necessary drilling, cutting to fix electrical items complete all as spfd and directed with followings: (a) GI sheet channel made to shape 50X25X20 of 24 gauge fixed with rowel plug with screw 450mm centre to centre along with perimeter of walls. (b) GI sheet channel make to shape 50X40X40mm of 24 gauge placed at 600mm centre to centre from perimeter of wall except long wall (in one span). (c) GI sheet intermediate runner of size 45X10X10mm of 24 gauge fixed at 1200mm c/c leaving frame of one side wall (in other span) (d) GI sheet 25mm wide and 20mm gauge suspenders fixed with the screw steel fasteners to roof ceiling @ 1200mm c/c including plugging in RCC slab (e) GI wire mess fixed to framework complete all as spfd and directed.

S&F Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site all as specified and directed.

S&F PVC L sections, U sections,fillets etc for fixing of hollow wall panelling complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

M&L for PCC type E2 1:5:10 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed

Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness in floors, aprons etc., complete all as specified and directed.

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles all as specified and directed.

M&L for chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over & including screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles, complete all as specified and directed.

S&F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB, complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.

S&F in repair two way angle valves /tap with flange 15mm bore , fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed.

S&F in repair ABS body chrome plated health faucet with 1m long flexible pipe with wall hook complete with all fittings complete all as specified and directed.

S&F in repair Brass chromium plated 32mm bore bottle traps of approved make for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair ABS body chromium plated shower rose 65 to 90 mm size , shower Arm with swivel joints complete all as specified and directed.

Removing of surplus excavated/demolised materilas to a distance exc 50m & n.exc 100m and deposited where directed at a level n. exc 1.5 m above the starting point, complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrived material upto a distance n.exc 100m where directed all as specified.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recoved or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. Note: - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4, complete all as specified and directed.

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., complete as per Manufacturer's specifications. Note:- All the water proofing treatment shall be carried out by the authorised representation of manufacturers

Supply only integral water proofing compound, complete all as specified and directed.

R.K.ASSOCIATES (BID ID -3457068)