Karnataka

AOC

Works

Buildings

REPAIR AND RENOVATION WORK OF CS-1 COTTAGE BUILDING IN THE PREMISES OF JALADARSHINI GUEST HOUSE, MYSORE CITY.

Public Works Department

PWD Speical Division Office Mysuru | Mysuru, Karnataka

Amount: ₹15.2 LCloses: 4 May 2026Closed

Timeline

Published24 Apr 2026
Closed4 May 2026
Awarded—

Bids

1 Bid4 May 2026

#	Company	Amount	Status
1	DHANANJAYA B S ₹10.8 Laccepted-aoc	₹10.8 L	accepted-aoc

Tender Value

₹15.2 L

EMD Value

₹37,950

Closing Date

4 May 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

REPAIR AND RENOVATION WORK OF CS-1 COTTAGE BUILDING IN THE PREMISES OF JALADARSHINI GUEST HOUSE, MYSORE CITY.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35856

Reference Number

PWD/2026-27/BD/WORK_INDENT35856

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Speical Division Office Mysuru

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredKPWD Class IV and above Civil Contractor

RequiredAnnual Turnover Certificate with UDIN from CA along with profit and loss statements

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka Procurement portal due to internet connectivity issues and technical glitches at bidders end.

EMD Payments through K Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value Min Rs.500 and Max Rs.7500 soon after contract has been issued to bidder.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Materials like ASPHALT, AGGREGATES, steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.3 of STD tender document Attached.

All the items in the tender include all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer- in-charge of this work.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client

Contractor should follow strictly the prevailing rules of labour act

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-1

Contractors should be registered as KPWD Class IV and above Civil Contractor.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department Special Division Mysore during office hours on all working days.

The successful Tenderer shall deliver to the Employer a Security deposit in the form of NSC/DD/FDR in the name of the Executive Engineer, PWD, Special Division, Mysore given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered.

To qualify for award of this contract each tendered in its name should have in the last five years 2021-22, 2022-23, 2023-24 ,2024-25& 2025-26 achieved in at least two financial years an average financial turnover in all classes of civil engineering construction works only of Rs15.16 Lakhs.

Including cost of all materials, with all lead lift and labour charges, complete as directed by the Engineer-in-charge of the work

The contractor should pay the wage for labour as per schedule of rates. The contractor quoting less rates below schedule of rates for labour will be rejected.

ALL THE RATES ARE EXCLUSIVE OF GST AND GST WILL BE PAID SEPARATELY

Technical Criteria

General

Banker Details

Past Experience

List of existing commitments and ongoing work

Work Done Certificate

Capabilities of Vendor

KPWD REGISTRATION CERTIFICATE CLASS IV AND ABOVE

PWD Registration Certificate (Class I/II/III/IV)

Achieved in at least two financial years a average financial turnover (in all classes of civil engineering construction works only) of Rs. 15.16Lakhs

Audited CA Certificate of Annual Turnover

List of works for which tenders already submitted

Work Done Certificate

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹37,950

Important Dates

Last Activity

4 May 2026

Published

24 Apr 2026

Bid Opening

5 May 2026

Download Ends

2 May 2026

BOQ Preview

•

REPAIR AND RENOVATION WORK OF CS-1 COTTAGE BUILDING IN THE PREMISES OF JALADARSHINI GUEST HOUSE, MYSORE CITY.

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- Including cost of all materials, ...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost of all materials, with all lead lift and labour char...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good...

•

Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - clas...

•

Providing and fixing C.P. brass long body bib cock of approved quality

•

conforming to IS standards and weighing not less than 690 g. ---- Including cost of all materials, with all lead lift and labour ...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...

•

Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surfa...

•

Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as pe...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafter...

•

styrene butadiene styrene (sbs) based - Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. ---- Including cost of all materials, with al...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia ...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( g...

•

Providing and supplying of Executive table in L Shape completely made up of 25mm

•

prelaminated particle board 2mm thick edge banding for top and 8mm clear glass shall have a table top od size 2400 x900...

•

Teak Wood European Model : 1+3+1 with teapoy and cushion. Made out of Teak Wood legs 4.5"x4.5" with curve. Front handle support patti 8"x1.5" with curve cutting. Sofa head rest patti 6"x1.5", Sofa sid...

•

Providing and fixing storage unit made up of 19mm and 25mm and 12mm thick commercial ply vertical Horizontal support finished in approved 1.5mm laminate with 12mm ply with colur laminate finished and ...

•

Providing supplying and fixing of Persian carpet of size 1.50X0.90 mtr with all lead lift and labour charges complete as directed by the Engineer - in - charge of the work. ---- Including cost of a...

•

Providing and supplying Revolving executive chair with seat is made up of PU moulded cushion with fabric back seat of PP structure with Mesh with five leg revolving base with twin wheel castors with a...

•

Providing and supplying center table is made up of vertical and top boards are 25mm thick with glass top frame /box made of 18 mm Commercial plywood board and Both sides laminates inside 0.8mm outer ...

•

Providing and supplying Revolving chair for PA section: Made of 5-Legged revolving fabricated base with twin wheel castors with adjustable back tilt with fabric upholstered cushioned seat and mesh bac...

•

Providing and supplying Visitor Chair made up of 25mm sq MS tubular frame duly chrome plated with fabric upholstered cushioned seat and mesh back rest with PP arms rest OSIYA VC SQ Net and including c...

•

Providing and laying of Modular wooden polished flooring of 12mm thick high density timber of approved colour and design with end trims transition end profiles and T profile, Four side corner beading...

•

Providing and fixing Veneer panelling, over the 50mm X 35mm sal wood frame work at spacing not exceeding 60Dmm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed ove...

•

Providing and supplying PA Section Table : of size 1500x900x760 mm the table shall have a storage unit consisting of one drawer and a cupboard with shelf inside in the right hand side (with provision ...

•

Providing supplying and fixing of Photo frame size 12 inchesX 18 inches HD Print with laminated mat finishing & Wooden frame, Back side MDF sheet. with all lead lift and labour charges complete as d...

•

Providing supplying and fixing of Photo frame size 24 inchesX 24 inches HD Print with laminated mat finishing & Wooden frame, Back side MDF sheet. with all lead lift and labour charges complete as d...

•

Providing supplying and fixing of Photo frame size 20inchesX 30 inches HD Print with laminated mat finishing & Wooden frame, Back side MDF sheet. with all lead lift and labour charges complete as di...

•

Providing supplying and fixing of blackouts fabric curtains with frills stitching SS roads supporting Brackets & End caps with all lead lift and labour charges complete as directed by the Engineer ...

•

Providing and Supplying Brass Emblem Government of Karnataka including cost of materials, labour with supply to place and installation complte ---- Including cost of all materials, with all lead lift ...

•

Providing and Supplying Brass Embosed name plate including cost of materials, labour with

•

supply to place and installation complte. ---- Including cost of all materials, with all lead lift and labour ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-1 Indent No 35856.doc

Tender Document • 0.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

DHANANJAYA B S

₹10.8 Laccepted-aoc