COMPREHENSIVE MAINT AND REPAIR OF INTERNAL WIRING, FITTING FIXTURES AND SUBMAIN WIRINGs, DBs, EARTHING AND CEILING OF SONAR ENCLAVE, MAYUR COMPLEX AND POCKET Nos. 1, 3, 4, 16, 17, 19, 20, 21 AND 22 UNDER GE(A) JAISALMER.

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping/concealed conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets , light fitting etc removing materials for taking credit and making good disturbed surface of walls,floors etc complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping/surface conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box thickness as per IS standard (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 2.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 4.00 here-in-before above but for one bell/buzzer point controlled by one push botton.

All as per Item No. 4.00 here-in-before above but for one light point controlled by two, 2 way switches.

All as per Item No 4.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

All as per Item No. 4.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

All as per Item No. 4.00 here-in-before above but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No. thorugh existing PVC concealed conduit of suitable size with accessories in wall floor etc with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 2.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and directed by Engineer-in-Charge.

All as per Item No. 10.00 here-in-before above but for one bell/buzzer point controlled by one push botton.

All as per Item No. 10.00 here-in-before above but for one light point controlled by two, 2 way switches.

All as per Item No 10.00 here-in-before above but for one socket out let 3 pin 5 Amps on the same board.

All as per Item No. 10.00 here-in-before above but for one socket outlet of 3 pin 5 Amp on independent board.

All as per Item No. 10.00 here-in-before above but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 2.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLSH cable 1100 volts grade, ISI 694 marked with valid CML No. and PVC concealed conduit of 20 mm bore & necessary wall cutting including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 2.5 Sqmm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for the one light/fan point, controlled by one way switch 5 amps complete all as specified and directed by Engineer-in-Charge. Note : Modular switch and socket shall be measured and paid separately.

All as per Item No. 16.00 here-in-before above but for one bell/buzzer point controlled by one push botton.

All as per Item No. 23.00 here-in-before but for one light point controlled by two, 2 way switches.

All as per Item No. 16.00 here-in-before above but for one socket out let 3 pin 5 Amps on the same board.

All as per Item No. 16.00 here-in-before above but for one socket outlet of 3 pin 5 Amp on independent board.

All as per Item No.16.00 here-in-before above but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-Charge.

S&F in repair of switch modular 06 A 01 module , one way as per existing pattern complete all as specified and directed by Engineer-in-Charge.

S&F in repair of modular bell push 06 Amps 1 module as per existing pattern ccomplete all as specified and directed by Engineer-in-Charge.

S&F in repair of of modular socket outlet, multi purpose, 06 Amps 3 pin combined 2 module as per existing pattern complete all as specified and directed by Engineer-in-Charge.

S&F ir repair of modular Switch 16 Amps one way 1 module as per existing pattern complete all as specified and directed by Engineer-in-Charge.

S&F in repair of modular Socket 16 Amps, 5 pin combined 2 module as per existing pattern complete all as specified and directed by Engineer-in-Charge.

S&F in repair of switch modular 06 Amps two way, 1 module as per existing pattern complete all as specified and directed by Engineer-in-Charge.

S&F in repair of modular fan regulator 5 step type, 2 module as per existing pattern complete all as specified and directed by Engineer-in-Charge.

M&L for lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings including taking down unserviceable lamp holder of any description complete all as specified and directed by Engineer-in-Charge.

S&F of ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F in repair of bell AC single pole Ding Dong type 230 volt complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLSH) in and including PVC casing & caping/Conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description complete all as specified and directed by Engineer-in-Charge. Note: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & caping/Conduit shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLSH) in existing concealed /surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description complete all as specified and directed by Engineer-in-Charge. Note : Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLSH) in through including concealed conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description complete all as specified and directed by Engineer-in-Charge. Note : Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable and One run of PVC concealed conduit shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red, blue, yellow, black & green for three phase) circuit with four single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLSH) including surface/ concealed PVC conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description and complete all as specified and directed by Engineer-in-Charge. Note : Four runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC conduit & necessary wall cutting shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red,blue,yellow, black & green for three phase) circuit with four single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLSH) in existing PVC concealed conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description and complete all as specified and directed by Engineer-in-Charge. Note: Four runs of 6.0 sqmm cable & One run of 6.0 sqmm cable shall be paid as one unit length.

M&L for submain wiring with approved colour code/as per IS (Red,blue,yellow, black & green for three phase) circuit with four single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 10.0 Sq mm (FRLSH) including surface/ concealed PVC conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 10.0 Sq mm (FRLSH) of continuous earth wire green in colour including taking down old u/s sub-main wiring of any description complete all as specified and directed by Engineer-in-Charge. Note : Four runs of 10.0 sqmm cable & One run of 10.0 sqmm cable and One run of PVC conduit & necessary wall cutting shall be paid as one unit length.

S&F of LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM-80 / Test Report complete all as specified and directed by Engineer-in-Charge.

S&F of LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF>= 0.95 , Separate detachable type Electronic constant current drivers for easy replacement and maintenance, THD < 10% , Necessary mounting arrangements .The fixture shall be suitable for wall mounting /suspension mounting as per site requirement . The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report complete all as specified and directed by Engineer-in-Charge.

S&F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F of recessed/ceiling/surface/POP mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas 50watt LED (100 Lumen/watt or higher) , size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F of recessed/ceiling/surface/POP mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas 36 watt LED (100 Lumen/watt or higher) , size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-Charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 18 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F for LED downlight recessed/ceiling/surface/POP mounted luminare round type 30 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement wall mounted decoration lights ,01 light opal glasswith chrome finish wall lamp,E14 LED 4.5WX1, including driling of wall ,fitting of light on the wall with necessary accessories complete all as specified and directed by Engineer-in-Charge.

S&F in repair/replacement wall mounted decoration lights ,02 light opal glasswith chrome finish wall lamp,E14 LED 4.5WX 2, including driling of wall ,fitting of light on the wall with necessary accessories complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of 05 mtr,2 Amp LED flexible strip use high brightness SMD LED as light source and high quality temp. resistant FPCB, Voltage DC 12 V color R/Y/B/G/P/W/WW including suitable electronic driver 2 amp complete all as specified and directed by Engineer-in-Charge.

S&F LED building security light fitting 35 Watt (or above) 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver including thermal management in multiple optics complete with IP 65/66 protection complete with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed by Engineer-in-Charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts LED & height of light 0.6 M ,with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete all as specified and directed by Engineer-in-Charge.

S&F LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed by Engineer-in-Charge.

S & F in repair of LED Bulb white E-27 , 9 Watt of complete all as specified and directed by Engineer-in-Charge.

S&F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including of LED bulb 15 watts complete all as specified and directed by Engineer-in-Charge.

S&F for MCCB DB VTPN 4 way 415 V double door IP 54 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and directed by Engineer-in-Charge.

S&F for sheet metal enclosure MCB DB TPN 4 way double door IP 54 with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and directed by Engineer-in-Charge.

S&F for sheet metal enclosure MCB SPN DB 12 way with 200 Amps rated bus bar 240 volts double door IP54 with magnitic locking system complete all as specified and directed by Engineer-in-Charge.

S&F for sheet metal enclosure MCB SPN DB 8 way with 200 Amps rated bus bar 240 volts double door IP 54 with magnitic locking system complete all as specified and directed by Engineer-in-Charge.

S&F Sheet metal and neutral enclosure single pole with two pin and earth plug and socket single pole MCB 20 Amps 240 volts fixed complete all as specified and directed by Engineer-in-Charge.

S&F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 125 Amps with extended terminals complete all as specified and directed by Engineer-in-Charge. Note :- Suitable size and frame of MCCB required as per existing DBs at site.

S&F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified and directed by Engineer-in-Charge. Note :- Suitable size and frame of MCCB required as per existing DBs at site.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 63 Amps to 100 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

S&F miniature circuit breaker (MCB) of single pole and neutral SPN 40 AMP to 63 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

S&F miniature circuit breaker (MCB) of single pole SP 10-32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and laying of 1100 volts grade heavy duty service cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq.mm 2 Core including PVC conduit pipe nominal cross section in service connections complete all as specified and directed by Engineer-in-Charge.

M&L of PVC casing & caping of any type, size by means of shadles, clamps screwes to existing wall/ceiling and making good in all respect including wiring inside all as shown complete all as specified and directed by Engineer-in-Charge.

S&F modular white cover plate with frame inner and outer plates including the taking out and refixing of existing/new switches and sockets,regulators etc. for following sizes complete all as specified and directed by Engineer-in-Charge :-

1 Module

2 modules

3 modules

4 modules

6 modules

8 modules

12 modules

S&F modular metal flush boxes including the taking out and refixing of existing/new switches and sockets,regulators etc.and inner and outer plates for following sizes complete all as specified and directed by Engineer-in-Charge :-

1/2 modules

3 modules

4 modules

6 modules

8 modules

12 modules

S&F of in repair plastic laminated bakelite sheet cover of hylem 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete of following sizes complete all as specified and directed by Engineer-in-Charge :-

10" x 12" size

8" x 10" size

8" x 6" size

7" x 4" size

4" x 4" size

S&F energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP66 luminaire with high efficacy with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by Engineer-in-Charge. Note :- Fixing of light at any height arrangement of ladder should be provided by contractor.

S&F energy saving, environment friendly & robust integrated well glass luminarie with die cast canopy&gear housing for covered shed 70 W IP66 luminaire with high efficacy with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting complete all as specified and directed by Engineer-in-Charge. Note :- Fixing of light at any height arrangement of ladder should be provided by contractor.

M&L for in repair of bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to 4.00 mm dia GI wire as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 15 mm dia light grade pipe for earth lead protection connected to electrical equipment and earthing test point , earth dolly and earth chamber as shown in elect plate No 2 of SSR Pt-I including all necessary earth work, excavation, earth chamber with PCC 1:3:6, Type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed by Engineer-in-Charge.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to DBs or any other indicated situation for loop earthing with 4.00 mm dia GI wire size complete all as specified and directed by Engineer-in-Charge.

M&L for GI tubing light grade 15 mm dia for cable protection complete all as specified and directed by Engineer-in-Charge.

Supply, install in repair testing and commissioning weather and vermin proof electric energy meter box wall mounted factory fabricated outdoor type (CPRI approved) totally enclosed made out of 2.0 mm thick sheet metal enclosure of suitable size(IP 54 Protrction), for3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) for each meter and its MCB(SPN) and bottom gland plate and locking arrangement consisting of suffiecient Nos of circular cable entry holes at bottom with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required Nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with L.T armoured incoming and including required sizes of cable lugs of aluminium complete all as specified and directed by Engineer-in-Charge and consisiting of following :- Size of Meter Panel should be (1.35MX1.20MX0.195M).

Item No. 73.00 Contd…. Note : Old meter to be taken down from old meter box and refixing the same in to new meter box and write to Meter MES No in black colour paint and the charges of above deemed in new meter box price. (a) MCCB 100 Amps 4P 25 KA(Ics=Icu), 415 V - 01 No. for incoming. (b) LED type indicator lamp Red/Yellow/Blue colour-01 set (c) Din rail and Section for fixing 1 phase Energyy meter(The front portion of panel to be having Glass to view meter reading)- 6 Nos(6 for Qtrs ) including taking out and refixing old existing meters. (d) Din rail and section for fixing including MCB SPN 40A for mains of Qtrs- 6 Nos (e) Sufficient submain entries and exit for qtrs and staircase (f) Internal wiring/busbar for connection purpose

M&L for MS Work i:e includes material, cutting, welding, other process for shaping of material to get into required shape as per site requirment and fixing on site complete all as specified and directed by Engineer-in-Charge.

M/S YOGANSH CONSTRUCTION CO. (BID ID -3445836)

Bidder Name

SHREE BHAGWATI ENTERPRISES