Provn of LT Cable for Garden lights with connected items in MOI at Sgnr Mil Stn.

Amount

Provn of LT Cable for garden lights with connected items in MOI at Sriganganagar Mil Stn:- (a) Excavating in tranches / post poles, not exc 1.5m wide and not exc 1.5m in depth for laying of cable etc and getting out in soft/loose soil. (Qty- 55cum). (b) Returning, falling in, including spreading levelling, watering and well ramming in layers exc 1.5m above the staring point of soft / loos soil. (Qty-35Cum). (c) Removing excavated material n. exc 50m and depositing where directed at a level n. exc1.5m above the staring point of soft/loose soil. (Qty-20cum). (d) Material and labour four dry sand cushioning to under ground cable in trenchsincluding sreading, levelling, hard punning and consolidating, complete all as specified and specified. Note:- for the purpose of payment punned thickness will be measured. (Qty-16.5cum). (e) M&L for brick protection with old size sub class 'B' bricks laid flat, length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge. (Qty-1740 Nos). (f) M&L for boring holes under road/pavement/hard standing or any other situation by manual means suitable for passing GI pipe 80 mm bore and making good both the end complet all as specified and directed. (Qty-20RM). (g) Supply and lay GI tubing 80mm box light grade ISI marked for cable protection /GI striper wire protection at road crossing /floor/wall/on pole or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps saddels all as directed and specified for the size 80mm dia. (Qty-20RM). (h) Supply, laying, jointing, testing and commissioning under ground LT cable 50sqmm, 3.5 core 1100volts graded, XLPE insulated armoured and PVC sheathed with standed aluminium conductor, heavy duty, ISI Marked, including cable glands, cable lugs etc to suit the cable size, laid in tranches, fixed along the pole or through GI pipe laid under floors etc fixed concealed in walls encased in GI pipe etc complete. (Qty-50RM). (j) Ditto all as per item Ser No (g) Above but 25 Sqmm 4core (Qty-200RM). (k) Provision of earthing using 600mm x 600mm x 6.3mm galvanised steel earth plate as electrode buried vertically in ground (earth pit not less than 2.25meter deep below the normal ground level) with top eadge of the plate at a depth ofton less than 1.5m below ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel (and 50mm dia GI light grade pipe for protection of GI strip) to extent of 7.5 meters as earthing lead and connecting to the eqpt, HT lighting arrestors etc including charcoal dust and salt packed all around the earth plate in alteranate layers in the earth pit all as per electrical plate No 5 of SSR Part-I including PCC foundation / chamber in mix 1:2:4 type B-1 with MS angle iron frame, CI cover with provision of locking arrangement and 20mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement M&L complete including excavation and earth work in any type of soil/strate and testing all as specified and directed. (Qty-2 Set). (l) M/L for pole mounted box, made of FRP, two connector and MCB SP 5 Amps B series including necessary clamps 25mm x 3mm cross section and suitable size nuts and bolts all as directed by Eng-in- charge. (Qty-3Nos). (m) S&F on pole/wall/in Panel / with febrication of stand, sheet metal enclosure, Bus bar chamber consisting 4 pole 100Amp 415 volts aluminium busbar suitable for connecting cable as a junction including connecting of cables with suitable size aluminium thimles, cable glands including earth work and PCC complete all as specified and directed. (Qty-3Job). (n) S&F on pole/wall/in Panel / with febrication of stand, sheet metal enclosure, Bus bar chamber consisting 4 pole 200Amp 415 volts aluminium busbar suitable for connecting cable as a junction including connecting of cables with suitable size aluminium thimles, cable glands including earth work and PCC complete all as specified and directed. (Qty-1Job). (o) S&F on load changeover switches with sheet steel enclosure, consisting 4 pole 250Amp 415 volts aluminium busbar suitable for connecting cable as a junction including connecting of cables with suitable size aluminium thimles, cable glands. Cat part No CO2504PEAV (HPL) OR equivalant. Make: Inddo Asian, Havells, L&T etc all as specified and directed. (Qty-1Job).

ANIL ENTERPRISES

Ganganagar Enterprises