Construction of Pudumai Building at Goubert Avenue, Puducherry

Name of Work : Construction of Pudumai Building at Goubert Avenue,

Abstract of Cost

Estimate Cost including

Sl.No. Description of Works

GST @ 18% (Rs.)

1 Civil works 3,58,67,350.39

2 Fire Fightings Works 23,46,512.14

3 Plumbing Works 2,53,077.19

4 Electrical Works 19,55,151.32

TOTAL COST 4,04,22,091.04

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.03.29 18:47:51

Name of Work : Construction of Pudumai Building at Goubert Avenue, Puducherry

Bill of Quantity

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

1 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means

in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting Cum 524.02 161.59 84,675.92

out the excavated soil and disposal of surplus excavated soil as directed , within a

lead of 50m - all kinds of soil

2 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited Cum 279.78 143.28 40,085.71

layer by ramming and watering, lead upto 50m and lift upto 1.5m.

3 4.1.8 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering.- All work upto plinth level -1:4:8 (1 Cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

4 6.1.1 Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation

7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand) Cum 29.59 6,276.38 1,85,689.10

5 2.27A.1 Supplying and filling with gravel cum (excluding rock) in trenches , plinth, sides of

foundations etc . In layers not exceeding 20 cm in depth consolidating each

deposited layers by ramming and watering etc .complete including all lead and lift

6 4.1.8 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering.- All work upto plinth level -1:4:8 (1 Cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

7 8.10.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of

size 75x50 cm deep and 1.8cm thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 6mm nominal size) and finished smooth - White agaria mable

8 9.1.2V Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.291 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

9 9.5.1.1V Providing and fixing panelled or panelled and glazed shutters for doors, windows, and

clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of

required size with necessary screws, excluding panelling which will be paid for Sqm 130.48 5,209.32 6,79,712.39

separately , all complete - 35 mm thick shutters

10 9.7.1V Providing and fixing panelling or panelling and glazing in panelled or panelled and

glazed shutters for doors, windows and clerestory windows (area of opening for panel

inserts excluding portion inside grooves or rebates to be measured). Panelling for Sqm 130.03 4,232.41 5,50,340.56

panelled or panelled and glazed shutters 25 mm to 40 mm thick -

11 9.7.7.1 Providing and fixing panelling or panelling and glazing in panelled or panelled and

glazed shutters for doors, windows and clerestory windows (area of opening for

panel inserts excluding portion inside grooves or rebates to be measured). Panelling Sqm 2.16 1,605.04 3,466.88

for panelled or panelled and glazed shutters 25 mm to 40 mm thick - 4mm thick

12 9.12 Extra for providing frosted glass panes 4mm thick instead of ordinary float glass

panes 4mm thick in doors, windows and clerestory window shutters. (Area of opening

for glass panes excluding portion inside rebate shall be measured)

13 9.36.1P Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed

with rawl plug and drilling necessary holes for rawl plug etc. including priming coat Cum 0.18 2,61,784.04 46,806.99

complete - Kiln seasoned and chemically treated

14 9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with

10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate

20mm nominal size)

15 9.54.2B Providing beams including hoisting, fixing in position and applying wood preservative

for the unexposed surfaces etc . Complete with -

16 9.72.2 Providing and fixing bright finished brass butt hinges with necessary screws

etc.complete :- 125x70x4mm (ordinary type)

17 9.72.6 Providing and fixing bright finished brass butt hinges with necessary screws etc

complete - 75 x 40 x 2.5 mm (ordinary type)

18 9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary

screws etc complete - 250 x 10 mm

19 9.74.4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary

screws etc.complete : - 100x10mm

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.292 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

20 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers

and a pair of lever handles of approved quality with necessary screws etc complete No 24.00 1,305.53 31,332.68

21 9.81.1 Providing and fixing bright finished brass handles with screws etc complete - 125 mm

22 9.81.3 Providing and fixing bright finished brass handles with screws etc complete - 75 mm

23 9.82 Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws etc complete

24 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised ( anodic

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required

colour or shade,with nuts and screws etc complete - 250 X 16 mm

25 9.117.2 Providing and fixing factory made uPVC door frame made of uPVC extruded

sections having an overall dimension as below (tolerance +_1mm ), with wall

thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointed with galvanized

brackets and stainless steel screws, joints mitred and plastic welded. The hinge side

vertical of the frames reinforced by galvanized M.S.tube of size 19 x 19mm and 1mm

(+-0.1mm) wall thickness and 3 nos.stainless steel hinges fixed to the frame

complete as per manufacturer's specification - Extruded section profile size 42 x 50

26 9.118.2 Providing and fixing to existing door frames - 30mm thick factory made Polyvinyl

Chloride (PVC) door shutters made of styles and rails of a uPVC hollow section of

size 60 x 30 mm and wall thickness 2 mm (+- 0.2 mm) with inbuilt decorative

moulding edging on one side The styles and rails mitred and joint at the corners by

means of M.S. galvanised / plastic brackets of size 75 x 220 mm having wall

thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by

inserting galvanised M.S.tube of size 25x20mm and 1mm (+- 0.1mm) wall thickness .

The lock rail made up of 'H' section , a uPVC hollow section of size 100 x 30 mm and Sqm 10.80 2,978.32 32,165.86

2 mm (+-0.2 mm) wall thickness , fixed to the shutter styles by means of plastic /

galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered

single panel of size not less than 620 mm, having overall thickness of 20 mm and 1

mm (+_ 0.1mm) wall thickness . They panels filled vertcally and tie bar at two places

by inserting horizontally 6 mm galvanised M.S.rod and fastened with nuts and

washers,complete as per manufacturer's specification

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.293 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

27 10.28 Providing and fixing stainless steel (grade 304) railing made of hollow tubes,

channels, plates etc., including welding, grinding. Buffing, polishing and making

curvature (whereever required) and fitting the same with necessary stainless steel

nuts and bolts complte. i/c fixing the railing with necessary accessories & stainless

steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor Kg 877.95 556.23 4,88,340.72

or the side of waist slab with suitable arrangement (for payment purpose only weight

of stainless steel members shall be considered excluding fixing accessories such as

nuts, bolts, fasteners etc.,)

28 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including

rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4

coarse sand) - 25 mm thick

29 11.27 Kota stone slabs 20 mm thick in risers of steps , skirting , dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1cement :3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs,including

rubbing and polishing complete

30 11.36C Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622

(thickness to be specified by the manufacturer) , of approved make in all colours ,

shades of size 300 x 600 mm as approved in skirting , risers of steps and dados,

over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing sqm 157.44 1,253.29 1,97,317.95

with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with

pigment of matching shade complete - size 300x600 mm

31 11.40.1 Providing and laying rectified ceramic rustic / matt finish floor tiles 300x300 mm or

more (thickness to be specified by the manufacturer ) of 1st quality conforming to

IS:15622 of approved make in all colours shades laid on 20mm thick cement mortar sqm 42.30 1,181.49 49,978.55

1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and

matching pigments etc., complete

32 11.62 Providing and fixing PVC corner beading of required size to suit the thickness of the

33 12.2 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal

thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4

coarse sand) mixed with 2% integral water proofing compound , laid over a bed of Sqm 279.59 655.93 1,83,388.09

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.294 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

34 12.20L Lime concrete terracing on roofs of required thickness laid to fall with 25mm

nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi)

rammed and finished with gur and belgiri treatment complete including rounding of

junctions with Parapet wall complete

35 12.22 Making khurras 45x45cm with average minimum thickness of 5 cm cement concrete

1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size)

over P.V.C. sheet 1m x1m x 400 micron, finished with 12 mm cement plaster 1:3 ( No 10.00 288.16 2,881.56

1cement : 3 coarse sand) and a coat of neat cement , rounding the edges, making

and finishing the outlet complete

36 13.22 Extra for plastering exterior walls of height more than 10 m from ground level for

every additional height of 3 m or part thereof

37 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to

line and level: in two coat

38 13.48.2 Painting wood work with deluxe multi surface paint of required shade. Two or more

coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 Sqm 843.41 115.25 97,203.34

sqm of approved brand and manufacure

39 14.35.3 Providing and fixing finished brass hard drawn hooks and eyes -200 mm No 68.00 80.98 5,506.87

40 15.7.3 Demolishing brick work manually / by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead - in Cum 234.59 455.19 1,06,779.82

41 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required

shape and size with plastic moulded frame of approved make and shade with 6mm No 8.00 1,155.31 9,242.52

thick hard board backing - rectangular shape 453 x 357 mm

42 18.48A Providing and placing on terrace (at all floor levels) polyethylene water storage tank

ISI: 12701 marked , with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without fittings and the base

support for tank - Circular Tank

43 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour - circular type -

100mm nominal dia

44 18.76.1 Cutting holes upto 30x30 cm in walls including making good the same - with common

burnt clay F.P.S.(non - modular)

45 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required

shape and approved quality - LD - 2.5 - rectangular shape 600x450 mm inernal No 4.00 1,271.63 5,086.51

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.295 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

46 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means

in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting cum 37.25 161.59 6,019.96

out the excavated soil and disposal of surplus excavated soil as directed , within a

lead of 50m - all kinds of soil

47 4.1.8 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse cum 1.05 4,907.68 5,152.67

sand : 8 graded stone aggregate 40mm nominal size)

48 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for -

foundations, footings, bases of columns etc for mass concrete

49 5.9.2 Centering and shuttering including strutting, propping etc and removal of form for -

Walls (any thickness) including attached pilasters, butteresses, plinth and string Sq m 49.95 553.62 27,651.80

50 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for -

Suspended floors , roofs , landings , balconies and access platform

51 5.1.2 Providing and laying in position specified grade of reinforced cement concrete ,

excluding the cost of centering , shuttering , finsishing and reinforcement - All work

upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size)

52 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending ,

placing in position and binding all complete upto plinth level - Thermo - Mechanically Kg 1,200.00 94.13 1,12,954.32

Treated bars Fe - 415 or more

53 13.3.1 20mm cement plaster of mix -1:4 (1 cement : 4 fine sand) Sq m 31.94 321.03 10,252.89

54 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited Cu m 18.33 143.28 2,626.90

layer by ramming and watering, lead upto 50m and lift upto 1.5m

55 NPSR Disposal of building rubbish and unserviceable dismantled materials upto 5Km radius

the rate include incidental charges and loading for transportation by mechanical

means. Rate approved by SE-I vide Lr.No. 183/ PW/SE-I/AE(P)-II/F.No.309/2018-

56 NPSR Providing and fixing PVC 110mm dia terminal guard - Vent Cowl etc., complete as

directed by the Engineer-in-charge. Rate approved by SE-I vide Lr.No. 560/ PW/SE- No 4.00 44.95 179.78

57 NPSR Prepare surface and painting with three coats of lime based paint with natural glue, of

approved color and quality on interior & exterior wall surfaces.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.296 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

58 NPSR Providing and Laying Madras Terrace Roofing (about 15cm thick)with locally

available flat bricks (kindikal & achu kal) in traditional technique with experienced

masons in lime mortar,using best lime and sand (1lime:2 sand & well ground in a pan

mixer cum grinder with kadukai extract and jaggery solution and cured for 14 days)

true to line and level at all heights and location including all scaffolding Cum 126.35 26,712.30 33,74,997.24

material,labour and sundries complete work including curing.Rate Appd no:11 / PW/

SEI / AE (P)-II/F.No.221/2018-19/534 dt.17-4-2018. The size of the brick shall be

230 (9”) x 115 (4-1/2”) x 75 mm (3”) and Half brick or 115 mm x75mm

59 NPSR Brickwork with common burnt clay bricks of class desingnation 3.5 infoundation and

plinth using in lime mortar 1:2 (1 lime / 2 sand) with requisite grinding, mixing and

maturing including proper bonding all materials, labour, scaffolding, etc. complete

60 NPSR Brickwork with common burnt clay bricks of class desingnation 3.5 in superstructure

above plinth level upto floor five level in all shape and sizes using in lime mortar 1:2

(1 lime / 2 sand) with requisite grinding, mixing and maturing including proper

bonding all materials, labour, scaffolding, etc. complete work. The size of the brick

shall be 230 (9”) x 115 (4-1/2”) x 75 mm (3”) and Half brick or 115 mm x75mm

61 NPSR Plastering 12 mm thick celing plaster with lime mortar 1:2 (1lime 2 fine sand ) in

including grinding the mortar, adding the natural ingredients like Kadukkai, Jaggary

and well grinded mixture the rate including necessary scaffolding, curing, etc.,

62 NPSR Plastering the walls 25 to 30mm thick at all height using Lime mortar mix 1:2 ( 1

lime : 2 fine sand) in two coats under layer 12mm thick plaster and top layer 10 to

15 thick plaster of lime mortar including necessary scaffolding, labour, materials, Sqm 3,101.84 1,888.00 58,56,264.48

curing etc., complete work as per specifications as directed by Engineer-in-charge.

63 NPSR Providing and fixing 12mm thick board (shingles) in place as per design and

drawing. The rate to include painting with two coats approved paint with one base Sqm 31.82 1,314.34 41,822.39

coat of a approved primer,and all material, labour etc.,complete-

64 NPSR Providing and fixing 15mm thick eaves board of 20 cm height in wood planks as per

the detailed drawing. The rate to include the cost of all materials labour charges for

hoisting, fixing the board in position to the wooden rafters drilling holes and fixing with Sqm 4.02 2,596.00 10,435.92

screws to the alignment , scaffolding, applying wood preservatives, etc. complete. As

directed by the Engineer in charge.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.297 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

65 NPSR Providing and fixing 3 lined dressed granite brackets (45x15x10cm),sunk and

moulded as per drawings,as support for thewooden beams.The rate are inclusive of

materials ,labour,civil works, scaffolding , etc, complete as per Engineer-in-charge.

66 NPSR Providing and Fixing of Wooden post - to a size of about 12 x12cm, and a ht of 2 -

2.5m as required, including granite base and wooden capitals, as per approved

sample, the rate including polishing of posts and tough seal at the base, complete

67 NPSR Acrylic Cover Notice Board 1200mm x 1800mm, Front cover with aluminum framed

acrylic sheet-lockable

TOTAL CIVIL WORK AMOUNT 3,58,67,350.39

FIRE FIGHTING WORKS

68 2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means

in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan),

including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting Cum 40.70 161.59 6,575.90

out the excavated soil and disposal of surplus excavated soil as directed , within a

lead of 50m - all kinds of soil

69 4.18 Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse Cum 1.25 4907.68 6,111.04

sand : 8 graded stone aggregate 40mm nominal size)

70 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for -

foundations, footings, bases of columns etc for mass concrete

71 5.9.2 Centering and shuttering including strutting , propping etc and removal of form for -

Walls (any thickness ) including attached pilasters , butteresses , plinth and string Sq m 50.18 553.62 27,782.23

72 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for -

Suspended floors , roofs , landings , balconies and access platform

73 5.22.6 Steel reinforcement for R.C.C.work kg including straightening , cutting , bending ,

placing in position and binding all complete upto plinth level - Thermo - Mechanically Kg 1,208.22 94.13 1,13,728.06

Treated bars Fe - 415 or more

74 5.1.2 Providing and laying in position specified grade of reinforced cement concrete ,

excluding the cost of centering , shuttering , finsishing and reinforcement - All work

upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size)

75 13.3.1 20mm cement plaster of mix -1:4 (1 cement : 4 fine sand) Sq m 31.94 321.03 10,252.89

76 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited Cu m 22.22 143.28 3,183.32

layer by ramming and watering, lead upto 50m and lift upto 1.5m

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.298 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

FIRE HYDRANT SYSTEM

77 NPSR Supply, Erection, testing & commissioning of electrical motor driven Hydrant

Pump of horizontal centrifugal end suction backpull out type with gland packing

and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary

accessories like bronze impeller, stainless steel shaft and mechanical seal along with

anti-vibration mounting, coupling, coupling guard and base plate for pump,

fabricated mild steel channel,foundation bolts, and pump should have the dry run

sensor provision, etc., as per local fire brigade requirement . The pump shall capable No. 1.00 765348.00 7,65,348.00

to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be

coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V,

50 Hz and complete set shall be mounted on a common base frame. The quoted

rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts

etc. RCC foundation is under civil scope.

78 NPSR Fabrication, Supplying, Installation, Testing & Commissioning of electrical control

panel, of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA

sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder

coated of approved shade after 7 tank treatment process, cable alley, inter-

connection, having switchgears and accessories mounting and internal wiring, earth No. 1.00 258605.50 2,58,605.50

terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3

phase, 50 HZ. AC supply with enclosure protection class IP 42 as required. (Control

Panel for Fire pumps)

79 NPSR Supply, erect, jointing, testing and commissioning heavy class G.I pipe (as per IS-

1239) in trenches (1 Mtrs below ground level) with necessary supports at equal

interval. Rate quoted shall include for necessary specials like long radius bends,

tees, including cutting,welding / flanged joints with necessary washers, nuts,

bolts,etc. Rate quoted shall also include for providing concrete anchor blocks (thrust

block) at all change in direction of pipeline and also near each joints and also

providing wrapping and coating for anticorrosive treatment as per specfication. (150

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.299 of 21

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

80 NPSR Supply, erection, testing, jointing and commissioning of heavy class GI pipes

conforming to IS 1239. Pipe specials such as bends, tees, reducers, etc. shall

confirm to ASTM A 234 Gr WPB forged fittings. The pipe shall be with flanged joints /

weld joints. Rate quoted shall include for necessary pair of flanges gaskets, nuts,

bolts, etc., for pipes being suspended from ceilings beam bottom, clamped on to the

walls, etc., and fittings upto 50mm socket welded type, 65 and above should be butt

welded type.and complete.Rate quoted below shall include providing, fixing as pipe

supports from column/wall or suspenders from roof slab to suit various dia of pipes

made out of GI adjustable rods threaded for a sufficient length to adjust the height of

support along with clamping arrangement for holding pipes of anchor fastening

arrangement design of hanger and should confirm to specification. (pipe support - 25

mm dia to 50 mm dia @ every 1.5 m c/c and 65 mm to 100 mm dia @ every 2.5 m

c/c)Also rate quoted shal include necessary pipe supports for 150 dia with supply and

fixing of channel, angle iron, flats as per drawing / instruction at site to suit site

condition, including for necessary G.I 'U' clamps, welding, cutting, nuts, washers,

etc., rate quoted shall also include for giving one coat of zinc chromate primer and

two coats of approved enamel paint for pipe supports.Rate quoted shall include the

insert plate, anchor fastners to fix the plates. Also it shall include necessary cutting

and welding of supports as required.

81 NPSR Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155

(PN10/ PN16) slim seal standard lever operated type with required flanges, nuts,

bolts etc. complete( with lock and key arrangement) 32mm Dia (BUTTERFLY

82 NPSR Supply, fixing, testing and commissioning of Air release valves screwed ends of

approved brand of manufacture, with accressories,etc complete- PN10 25mm Dia No. 1.00 1282.90 1,282.90

(AUTOMATIC AIR RELEASE VALVES )

83 NPSR Supplying, installing, testing and commissioning of heavy duty Ball valve screwed

ends of approved brand of manufacture. PN10 25mm Dia ( BALL VALVE) No. 1.00 1083.24 1,083.24

84 NPSR Providing and fixing nominal bore quartzoid bulb type sprinkler 68 Deg.C quick

response pendent type with suitable fittings complete. - K 80 (Pendant Sprinklers) No. 87.00 834.02 72,560.09

85 NPSR Supply and fixing of fire ball type AFO ABC Dry powder type metal fireball capacity

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

86 NPSR Supply and install in position approved make ABC Stored pressure type Fire

Extinguisher of 5 kgs capacity, fitted with discharge control valve (sq.grip type) CE

marked and pressure gauge, filled with mono ammonium phosphate powder as per

EN 3 615 approval, with discharge hose and open nozzle and supplied complete with

initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A, 21B

INTELLIGENT ADDRESSABLE FIRE ALARM & DETECTION SYSTEM

FIRE ALARM CONTROL VALVE :

87 NPSR Supply, erection, testing and commissioning of Micro Processor-controlled Intelligent

adressible Main Fire Alarm Control Panel to monitor loop panels located in at

Ground floor with dual stage alarm facilities, hooter, fire / fault indicators, audio-visual

signals, battery, battery charger, central processing unit, video display unit, provision

for printer, password protected, loop powered hooters, etc. intigration complete in all

respects as per detailed specification.(preferable:125 Detectors + 125 devices per

loop). Panel must be capable of True Peer-to-Peer Networkable Addressable Fire

Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus

1000 alarm log history events, QWERTY keypad for programming. The panel shall

work in degrade mode in case of CPU failure. Four access levels. The panel must be

capable of cross zoning facility. The Panel shall have 24 Hours backup and 4 Hrs

emergency backup. Panel should be UL 10th Edition and FM approved to meet

industry highest standards. rate quoted shall also include panel with provision to

expand for 2 addittional Loops in future and installation of software for programming

(mapping) the Fire detection and voice alarm system through FACP / Lap top. The

software shall consisting with facility like Upload / down load of informations to FACP,

Graphics compatible to autocad, Detectors information with change in address /

sensitivity etc as reuired. The rate quoted shall also include BACnet/ Modbus

modulae for BMS interface.

b) 4-Loop upto 8 loops Panel FIRE ALARM CONTROL PANEL No.s 1.00 354000.00 3,54,000.00

HEAT DETECTORS :

88 NPSR "Supply, Installation, Testing & Commissioning of Addressable Rate of Rise Heat

Detector rated at 9.4 deg C/min. The detector shall have twin bi-colour LED for 360

deg viewing. Addressing shall be with user friendly rotary decimal switches. No.s 6.00 3525.84 21,155.04

UL 7th edition "

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

COMBINATION DETECTORS (MULTISENSOR ):

89 NPSR Supply, installation, testing and commissioning of Addressable Multi-criteria Photo-

Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi

criteria detection device shall include the ability to combine the signal of the thermal

sensor with the signal of the photoelectric signal in an effort to react hastily in the

event of a fire situation. It shall also include the inherent ability to distinguish between

a fire condition and a false alarm condition by examining the characteristics of the No.s 45.00 3525.84 1,58,662.80

thermal and smoke sensing chambers and comparing them to a database of actual

fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360

deg viewing. Addressing shall be with user friendly rotary decimal switches. (

COMMON AREA AND ABOVE FALSE CEILING AREAS)

90 NPSR Supply, testing and commissioning of 1100V Grade 2 core of 1.5 sqmm PVC

insulated FRLS(armoured) Twisted Pair cable for connecting detectors / devices to

panels and main micro processor control panels located in the respective floors

including end termination with indentification tags at each end, etc., complete.The Rmt 800.00 162.84 1,30,272.00

quoted rates shall be inclusive of necessary juntion boxes made of M.S 16 SWG with

cutouts for incoming & outgoing cables in respective floors. (RED COLOUR)

TOTAL AMOUNT FOR FIRE FIGHITING WORKS 23,46,512.14

TOTAL AMOUNT FOR FIRE FIGHITING WORKS 23,46,512.14

91 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes

conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS

:5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm

92 12.42.4.2 Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories

for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including

jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal No 10.00 293.61 2,936.08

expansion - Single tee without door -110x110x110mm

93 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings /accessories

for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including

jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal

expansion - shoe (plain) - 110mm shoe

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

94 12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to

unplasticised- PVC rain water pipes by means of 50x50 x50 mm hard wood plugs

screwed with M.S. screws of required length, including cutting brickwork and fixing in No 42.00 298.20 12,524.31

cement mortar 1:4 ( 1 cement :4 coarse sand) and making good the wall etc.,

complete - 110mm

95 16.96 Supplying fixing and commisioning of Approved Make 2 HP mono- block pumpset

slow speed single phase motor. The rate include the cost of pumpset, pumpset fixing Cum 1.00 13565.91 13,565.91

in position and test run etc.complete

96 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type

W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including

flush pipe, with manually controlled device (handle lever), conforming to IS:

7231,with all fittings and fixtures complete, including cutting and making good the

walls and floors wherever required - W.C. pan with ISI marked white solid plastic

97 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front

urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265mm sizes respectively with

automatic flusing cistern with standard flush pipe and C.P.brass spreaders with

brass unions and G.I.clamps complete, including painting of fittings and brackets, No 6.00 4480.96 26,885.73

cutting and making good the walls and floors wherever required - One urinal basin

with 5 litre white P.V.C. automatic flusing cistern

98 17.7.1 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,

32mm C.P.brass waste of standard pattern, including painting of fittings and

brackets, cutting and making good the walls wherever required - white Vitreous No 8.00 4174.11 33,392.87

China wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

99 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste

fittings complete - flexible pipe - 32mm dia

100 17.69.2 Providing and fixing PTMT waste coupling for wash basin and sink, of approved

quality and colour - waste coupling 38 mm dia of 83 mm length and 77 mm breadth No 8.00 120.10 960.80

weighing not less than 60 gms

101 17.78.1 Providing and fixing CP brass health faucet of approved quality - 15 mm nominal

102 18.9.11 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings

i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes &

fitting with one step ASTM solvent cement and testing of joints complete (Internal Rmt 115.00 180.26 20,729.53

work exposed on wall) - 20mm nominal outer dia pipes

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

103 18.9.12 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings

i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes &

fitting with one step ASTM solvent cement and testing of joints complete (Internal

work exposed on wall) - 25mm nominal outer dia pipes

104 18.9.13 Providing and fixing ASTM pipes including all ASTM plain & brass threaded

fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of

pipes & fitting with one step ASTM solvent cement and testing of joints complete Rmt 35.00 240.09 8,403.31

(Interna work exposed on wall) - 32 mm nominal outer dia pipes

105 18.16.2 Providing and fixing brass stop cock of approved quality - 20mm nominal bore No 7.00 474.87 3,324.07

106 18.17.1 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed

end) - 25 mm nominal bore.

107 18.17.2 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed

end) - 32 mm nominal bore.

108 18.18.2 Providing and fixing ball valve (brass) of approved quality , high or low pressure, with

plastic floats complete - 20mm nominal bore

109 18.21.2.1 Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm

length - 15mm nominal bore

110 18.51.1 Providing and fixing C.P.brass long body bib cock of approved quality conforming to

IS standards and weighing not less than 690 gms - 15 mm nominal bore No 8.00 766.43 6,131.47

111 18.53.1 Providing and fixing CP brass angle valve for basin mixer and geyser points of

approved quality conforming to IS 8931 - 15 mm nominal bore

112 19.33.1 Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes

(type - B) conforming to IS : 13592- 1992 including jointing with seal ring

conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked

pipes -110mm diametre

113 19.33.1B Providing and fixing on wall face / column face unplasticised - PVC mould fittings

/accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for No 4.00 287.35 1,149.41

thermal expansion - Single tee without door - 110 x110x110mm

114 19.33.1C Providing and fixing on wall face / column face unplasticised - PVC mould fittings

/accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for

thermal expansion - bend 110 mm

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

115 19.33.1D Providing and fixing on wall face / column face unplasticised - PVC mould fittings/

accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for

thermal expansion - bend with door 110 mm

116 19.33.2 Providing and fixing on wall / column face unplasticised - PVC soil and waste pipes

(type B) conforming to IS :13592 - 1992 including jointing with seal ring conforming to

IS : 5382 leaving 10mm gap for thermal expansion - Single socketed pipes 75mm

117 19.33.2A Providing and fixing on wall / column face unplasticisd - PVC moulded fittings /

accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for

thermal expansion - Single tee with door - 75x75x75mm

118 19.33.2B Providing and fixing on wall / column face unplasticisd - PVC moulded fittings/

accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for No 3.00 181.70 545.09

thermal expansion - Single tee without door - 75x75x75mm

119 19.33.2C Providing and fixing on wall / column face unplasticisd - PVC moulded fittings/

accessories for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -

1999 including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for

thermal expansion - Bend 75 mm

TOTAL AMOUNT FOR PLUMBING 2,53,077.19

TOTAL AMOUNT FOR PLUMBING 2,53,077.19

ELECTRICAL WORKS

120 5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and

providing masonry enclosure with cover plate having locking arrangement and Each 1 3,815.25 3,815.25

watering pipe etc. with charcoal / coke and salt as required

121 5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories,

and providing masonry enclosure with cover plate having locking arrangement and

watering pipe of 2.7 meter long etc.but without charcoal / coke and salt as required

122 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor

earth electode , including connection / termination with GI thimble etc. as require Rm 10 19.62 196.20

123 5.8 Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip

earth electrode , including connection / terminating with nut , bolt, spring , washer

etc.as required. (Jointing shall be done by overlapping and with 2 sets of brass nut

bolt & spring washer spached at 50mm)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

124 5.9 Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip

earth electrode , including connection / terminating with G.I. nut , bolt, spring , washer

etc.as required. (Jointing shall be done by overlapping and with 2 sets of G.I.nut bolt

& spring washer spached at 50mm)

125 5.14 Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for

connections etc as require

126 5.15 Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc

127 5.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop

earthing as required.

128 2.5.3 Supplying and fixing following way , single pole and neutral , sheet steel , MCB

disribution board , 240 V, on surface / recess , complete with tinned copper bus bar ,

neutral bus bar , earth bar , din bar , interconnections , powder painted including Each 2 5,412.06 10,824.12

earthing etc. as required (But without MCB / RCCB / Isolator) -12 way (4+36) , double

129 1.10.3 Wiring or light point / fan point / exhaust fan point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class pvc

conduit , with modular switch, modular plate, suitable GI box and earthing the point Point 317 590.14 1,87,074.38

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - GROUP C

130 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit , 2 way

modular switch , modular plate , suitable GI box and earthing the point with 1.5 Point 18 635.69 11,442.42

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required

131 1.55.3 Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell

point (without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed PVC conduit , and earthing the Point 18 337.79 6,080.22

point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as

required - Group C

132 1.24.1 Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required - 5/6 A Each 85 47.78 4,061.30

133 1.24.3 Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required - 15/16 Each 28 85.11 2,383.08

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

134 1.24.4 Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required - 3 pin Each 85 69.65 5,920.25

5/6 A socket outlet

135 1.24.5 Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required - 6 pin Each 28 121.01 3,388.28

15/16 A socket outlet

136 1.24.6 Supplying and fixing following modular switch / socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required - Each 4 73.92 295.68

Telephone socket outlet

137 1.27.3 Supplying and fixing following size / modules , GI box alongwith modular base &

cover plate for modular switches in recess etc. as required - 4 module (125 mm x 75 Each 13 167.22 2,173.86

138 1.27.5 Supplying and fixing following size / modules , GI box alongwith modular base &

cover plate for modular switches in recess etc. as required - 8 module (125 mm x Each 20 235.40 4,708.00

139 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in Meter 800 50.22 40,176.00

case of recessed conduit as required. 25mm

140 1.21.4 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in Meter 150 99.64 14,946.00

case of recessed conduit as required. 40mm

141 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

142 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

143 1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

144 NPSR 300mm 1400 rpm anti dust 4 blade heavy duty exhaust fan of approved make. No. 8 950.00 7,600.00

145 1.50.1 Installation of exhaust fan in the existing opening , including making good the

damage , connection , testing , commissioning etc. as required - Upto 450 mm Each 8 177.71 1,421.68

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

146 NPSR Supplying, Installation, testing and commissioning of 36Watt LED Ceiling light

including cost of material, labour etc., complete.

147 NPSR Supplying, Installation, testing and commissioning of 1200 mm Sweep Ceiling Fan

fusion 50, energy saving and 5 star rating including cost of material, labour etc., No. 21 1,650.00 34,650.00

148 NPSR Supplying, Installation, testing and commissioning of 20Watt 4 Feet LED Tube Light

including cost of material, labour etc., complete.

149 NPSR Providing and fixing of Crystal Pendant Metal Jhumer round Chandelier Light with 6

blub holder upto 20 Watts Each of approved make. (Golden color)

150 NPSR Providing and fixing of 10 W LED Outdoor Waterproof Elevation light modern Up and

Down long wall sconce light of approved make. (Warm White color)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

151 PSR Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor for electric starting diesel

EG-350 generator comprising the following units:- (Approved make) air cooled and shall be of

multi stroke, multi cylinders, cold starting, developing not less than 43 BHP under

normal temperature and pressure. The engine shall conform to I.S. 10002 with latest

amendments. It shall be capable of taking 10% over load for one hour in every 12

hours of continous operation including 6 Nos. of anti vibration pads.The engine shall

be complete with the following accessories:Electrical starting provision, engine

cooling fan, fuel and lubricating oil filters, oil bath, air filter, lub oil pressure gauge 90

litres capacity fuel tank mounted with engine, hour meter with exhaust manifold,

flexible pipe, 12 /24 volts electric starting equipment complete with starter, alternator

and one 12 volts with 19 plates battery of approved make (with Guarantee cards) of

adequate capacity and low lubricating oil pressure/high temperature varying engine

shut down devices.The Acoustic enclosure shall have the following: Acoustic

enclosure shall bepowder coated and fabricated out of 16 SWGCRCA MS sheet. No. 1 3,65,615.00 3,65,615.00

Thesilent canopy shall be of nut bolt type construction. Powdercoating is done after

seven tank surface preparation process of sheet metal. Canopy panel and doors

shall have inside lining of FIRE-RETARDANT foam/Rock Wool as acoustic material.

Four hinged doors shall be provided to canopy, one door shall have glass window for

control panel.Base frame is fabricated either in ISMC channel or in sheet metal. The

base frame is rugged in construction and designed for mounting engine and

alternator, with cross members mounted on AVM. The base frame shall have

provision for mounting of acoustic enclosure and it is having provision oflifting hook

for convenient lifting ofcomplete set, i.e. along with canopy,engine and alternator.Fuel

tank shall befabricated out of 14 SWG CRCA MS sheet and is part of base frame. It

is duly painted and fitted with inlet and outlet connections of suitable capacity.The

Acoustic enclosure shall be Type test approved as per CPCB norms.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

The average sound level, when measure in green field condition (ISO m3744 OR

8528 PT 10) at 1-meter distance from all four sides shall be less than 75-dBA

average or as per CPCB norms. The average stabilized hot air temperature rise with

in the canopy is maintained with in 10 C over and above ambient

temperature.Acoustic enclosure is suitable for Outdoor / Indoor installation. Lockable

doors shall be provided. Lockable fuel filling arrangement to be provided external to

the canopy. Residential Silencer is housed in the canopy. The exhaust gasses shall

be taken out through a suitable flexible pipe to prevent any back pressure on the

engine.Base frame sturdy,fabricated welded construction, channeliron / sheet metal

base frame for mounting the above engine and alternator.Standard tools and

Spares:Double ended spanners complete set (small and big size sets) - 12Nos.

(approved make)Screw driver (30cm long) of approved make .Screw driver (45cm

long) of approved make .Cutting plyer.Diesel filter with elements - 2Nos.Oil filter with

elements - 1 No.All the above accessories with complete set.AlternatorThe alternator

shall be of approved make, self excited, self regulated, screen protected, drip proof

alternator with static excitation system capable of developing 30 KVA at 0.8 power

factor 415 volts, 3 phase, 50 cycles, generally conforming to I.S.4722 under normal

condition, the voltage regulation will be plus or minus 5% of rated voltage. It shall be

with end shield/ball roller bearings complete.Control Panel wall/pedestal mounting

(cubical type) fabricated sheet steel construction suitable for manual operation, rated

for system output incorporating the following devices/instruments. The panel is made

of 1.6mm sheet with one/two hinged front door, bolted back totally enclosed and

vermine proof. It shall be with all electrical connections and internal copper wiring

with proper color codings for internal wiring.All control equipments and indicating

instruments shall be mounted on the control panel. The control panel shall have the

following equipments:1 No.Amps/Volt/Frequency meter (96mmx 96 mm) 3 Nos. of

suitable current transformers2 Nos. of suitable selector switches for voltmeter and

ammeter main switch rotary type on/off pilot lamp (Standard make).1 No. input

terminal board.1 No. out put terminal board1 No. Kilowatt hour meter (62.5 KVA and

above)1 No. MCCB of suitable capacity (approved make) -30 KVA / 24 KW

Generator set (Air cooled) + 12C X 1.5SQMM cu ar cable

152 5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories,

and providing masonry enclosure with cover plate having locking arrangement and

watering pipe of 2.7 meter long etc.but with charcoal / coke and salt as required.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29

Code No. DESCRIPTION UNIT QUANTITY RATE AMOUNT

153 NPSR Supply, Transportation unloading, installation, testing and commissioning of Main

Lighting Panel comprising of the followings and including all other accessories etc.,

EB Incomer : 1 No 63A 4Pole MCCB ; Busbar: 63A TPN Aluminium Busbars 35KA

per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars ;

Outgoing : 2 Nos 32 A TPN MCCB with releases , 3 Nos 40 A TPN MCCB with

releases , 1 Set of RYB indication lamp, 1 No Multifucntion meter , Wall mounting

type fabricated with 16 SWG CRCA sheet enclosure. Door and partition shall be 18

SWG CRCA Sheet. The Panel shall be complete with suitable interconnections and

earthing etc. All doors should have proper locking/ sealing arrangements.

154 NPSR Supply, Transportation unloading, installation, testing and commissioning of Main

Power Panel comprising of the followings and including all other accessories etc., ,

EB Incomer : 1 No 200A TPN MCCB , Busbar: 200A TPN Aluminium Busbars 35KA

per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars ,

Outgoing : 6 Nos 32 A TPN MCCB with releases , 2 Nos 63 A TPN MCCB with

releases , 1 Set of RYB indication lamp, 1 No Multifucntion meter , Wall mounting

type fabricated with 16 SWG CRCA sheet enclosure. Door and partition shall be 18

SWG CRCA Sheet. The Panel shall be complete with suitable interconnections and

earthing etc. All doors should have proper locking/ sealing arrangements.

TOTAL AMOUNT FOR ELECTRICAL WORKS: 19,55,151.32

TOTAL AMOUNT FOR ELECTRICAL WORKS: 19,55,151.32

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

Construction of Pudumai Building at Puducherry KUMAR MEHRA Date: 2023.03.29