Renewal or Reconstruction of Painted Canal Service Road Of Rehi Mr From Km 0.000 To 1.000

Amount

Earth work- Earth work in canal for making daula and outer patari all Types of soil Including all lead and lift complete with dressing and manual compaction.

Brick edging on both side of the road-Brick edging on both side of the road of brick class M-150 8 cm wide and 12 cm deep laid with mud mortar including labour and supply of bricks finished to required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer in charge of the work including material labour and Tand P etc for proper comletion of work.

WBM Grading - II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 Kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading II as per MORD Specification Clause 405.

WBM Grading - III Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 Kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per MORD Specification Clause 405.

Prime coat (Slow setting )- Providing and applying prime coat with bitumen emulsion on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg per sqm as per MORD specification Clause 405

Tack Coat Providing and applying tack coat with bitumen VG 10 using emulsion distributor at the rate of 0.30 Kg per sqm on the prepared bituminous granular base surface cleaned with mechanical broom as per MORD specification

20 mm thick Open Graded Premix Carpet using Bituminous- Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a hot mix plant, transpotation to the site, laying with paver finisher to the required grade, level and alignment and rolling with a smooth wheeled roller 8-10 Kn capacity, finished to required level and grades.

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C seal coat As Per MORD Specified Clause 510

M/S VIJAY KUMAR PANDEY

gyan singh

JAI LUXMI ENTERPRISES