REPAIR TO INTERNAL WATER SUPPLY TOILETS SANITARY FITTING CLEANING OF OHT IN MD ACCNS OTM ACCN AT WELLINGTON STATION UNDER GE WELLINGTON

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:4 on fair face of brick or concrete surface

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement incl using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning the surface and APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of liquid integral water proofing compound will be measured and paid separately

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, in sunken portion complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.