Providing and laying of UG cable alongwith panel for KPKB Sub Bhandar and Liquor canteen at CSWT BSF campus Indore

Providing and Laying of one number XLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5x95 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering , conf to IS: 7098 part-1 of make- KEI/Havells/Polycab/RR/Plaza.

Providing and Laying of one number XLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5x95 sqmm conf to IS: 7098 (Part-I) in the existing RCC/ HUME/ METAL pipe as required.make- KEI/Havells/Polycab/RR/Plaza.

Providing and Laying of one number XLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5x35 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering , conf to IS: 7098 part-1 of make- KEI/Havells/Polycab/RR/Plaza.

Providing and Laying of one number XLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 3.5x35 sqmm conf to IS: 7098 (Part-I) in the ixisting RCC/ HUME/ METAL pipe as required.make- KEI/Havells/Polycab/RR/Plaza.

Fabrication, supplying, installation, testing and commissioning of outdoor type feeder pillar (Protection Index IP-54) 1200MM(height)X1200 MM(Width)X 450 MM deep (panel partition required one for Generator line and second for main line) made of 2 mm thick CRCA sheet steel, dust & vermin proof having rain protection shade, compartmentalised & seggregated for each circuit, having double door in both side, locking arrangement, openable hinged type door (double leaf), suitable for 415V, 3 pahse, 4 Wire 50 Hz AC supply system, having seperate chamber with 4 strip aluminium busbar of 400 Amps (02 set one for Gen line and second for main line). capacity, GI earth bar at the full width of rear, earth stud, cable entry through gland plate of 3 mm thick, i/c cleaning & finishing complete with powder coating in approved shade, 40 mm x40 mm x 5 mm M S angle iron base and 4 legs of length 600 mm & civil foundation , grouting the same in suitable cement concrete foundation etc complete as required & including supply and fixing the following swich gears and accessories including incoming and out going connections with suitable busbar/pvc copper wire, inter connections, with suitable size copper FRLS wire Thimble/lugs gland plate, earthing the boards as required including dismantling panel at site (Panel should be as per design & drawing approved by Engg in charge). (CPRI Approved) i) 125 Amps, 4 pole 36 KA, MCCB having thermal magnetic release with adjustable overload and short circuit setting i/c spreader link (Ics 100% Icu)-02 Nos make- havells/L&T/Standard/Indoasian/legrand ii) 63 Amps, 4 pole 36 KA, MCCB having thermal magnetic release with adjustable overload and short circuit setting i/c spreader link (Ics 100% Icu)-02 Nos make- havells/L&T/Standard/Indoasian/legrand (iii) LED indication lamp-03 Nos (R,Y,B) with inter connection

Fabrication, Supplying , Installation, Testing and commissioning of outdoor type totally enclosed weather proof cable junction box of suitable size ( minimum size 450mm x 450mm x 400mm ) , fabricated from 14 SWG/2 mm thick CRCA sheet suitable for 415/500 volts, 50 Hz A.C. supply with gland plate, hinged front openable double leaf doors and locking arrangement, suitable size 4 strip Al. busbar of rating 400 Amp. treated with 7 tank process, powder painted with approved shade, including connection / interconnections with FRLS PVC insulated copper conductor single core cable of suitable size etc. complete as required grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should be as per design & drawing approved by Engg in charge).

Providing and fixing of 3 phase 20-100 Amp digital energy meter (Trivector meter) accuracy class1.0, 3x240 V, 50 Hz with backlit LCD display HPl make Item code- TPPB1W23131000OC01 or equivalent make Havells/L&T/Schneider/ABB etc as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and fixing following way, horizontal type three poleand neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But withoutMCB/RCCB/Isolator) 4 way (4 + 12), Double door