REPAIR/MAINT OF STREET LIGHT FITTINGS AND CONNECTED ACCESSORIES AT AREA III AND IV MIL STN TALBEHAT

Taking down old unserviceable light fitting of any type and wattage.

Labour only for attending of street/security light complaints taking down from pole and refixing same after repair and repair other misc E/M wks, checking of existing electrical circuits i.e. LT OH and UG cable, nature switches & other accessories, P/B, MCCB incomer/out going etc. for continuous electrical supply, detection of nature of fault/defect carrying out minor repairs etc. as required to make the items functional and incl tightening of loose connections, taking down lights and refixing the same after necessary repairs, replacing defective items provided under relevant items of issue only from MES store. The item rate included for repairs items/materials i.e. fuse, thimbles, small wires of any size and description upto 0.5 mtr, screw washer etc., along with all items for complaint, suitable T & P, safety equipment & other necessary device, every day excl Sunday and Holiday complete all as specified and directed.

Supply, fixing and testing high performance LED Street Light fittings of 72 Watts, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm complete all as specified and directed ,MAKE : Havells/Philips/Crompton

Supply, fixing and testing high performance LED Street Light fittings of 90 Watts, energy saving and environment friendly long life pressure die -cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10KV Built-in-Surge Protection Device suitable for pole dia 54 mm complete all as specified and directed ,MAKE : Havells/Philips/Crompton

Supply, fixing and testing in replacement High performance LED Flood light fitting/luminairies of 170 watt power consumption, made out of die cast aluminium housing, hermitically sealed to achive IP 66 ingress protection, optical compartment shall be provided with heat resistant toughened glass, while control gear shall be provided with die cast aluminium cover for safety including multistage current constant voltage topology driver suitable to operate in input voltage range of 150V to 270V (nominal rated voltage-240V) with minimum 3KV surge protection. Power factor greater than 0.90 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire complete all as specified and directed.Make :-Havells/Philips/Crompton

Supply and fixing LED driver 70/100 watt for street lights complete all as specified and directed.

Supply and fixing timer switch Panel board for street lights control for 2 KW three phase rating consists alongwith connected accessories with bracket nuts and bolts complete. Make : Havells/surya/crompton greves/panosonic

Supply and fixing in replacement, street light bracket on RCC/Steel tubular pole made out of 40 mm dia bore G I Pipe light grade of length not less than 1.5 mtr bend to required shape for holding the fitting with providing the clamp nut, bolt and washer etc of required size and 02 nos mild steel supporting clamps shall be made out of flat iron of suitable size of requisite length mild steel work shall be painted with two coat of alluminium paint over a coat of red oxide primer complete all as specified and directed by Engr-In-Charge. Make of GI Pipe:- JINDAL, PRAKASH, TATA.

Excavation in trenches not exceeding 1.5mtrs wide & not exceeding 1.5mtr in depth as in soft/ loose soil & getting out complete all as spfd & directed.

Returning , filling in spreading, levelling, watering & well Ramming in layers not exc 25cm thick complete all as spfd & directed.