SPECIAL REPAIR TO BUILDING NO NP-34 NP-35 BLOCK No 120 AND PROVN OF CERTAIN MINOR/REVENUE WORK AT MADHOPUR UNDER GE BASOLI

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose of soil complete all as specified and directed..

M&L PCC 1:3:6 type C-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for M-25 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete (using 20 mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 Design mix as in Columns, pillars, piers, posts and struts (using 20 mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span (using 20mm graded crushed stone aggregate) complete all as specified and directed .

M&L for M-25 Design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and stair case slab, in shelves, parapets, railing and like(using 20 mm graded crushed stone aggregate) complete all as specified and directed .

TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

All as per item No 11 above but 6 mm to 8mm dia

All as per item No 11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Form work to soffit/sides of floor or roof beam complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

Form work to edges of concrete flats, breaks in floors, openings in concrete walls,floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10 cm wide but not exceeding 20cm for rough finished flat surfaces of concrete complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces as in wall in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10mm thick on brick work or concrete surface in cement mortar 1:4 finished even and rough surface for receiving tiles complete all as specified and directed.

15mm thick screed bedding in cement mortar 1:4 complete all as specified and directed.

20mm thick screed bedding in cement mortar 1:4 complete all as specified and directed.

Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L hardcore of broken stone or boulders. gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Plain cement concrete 75mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and applying two coats synthetic enamel paint, over one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 165 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

Supply and fix powdered coated anodized aluminium window frame of size 101.60x44.45x1.60mm of approved manufacturer, fixing to floor, wall with rawl plug and screws and fixing window shutters with frame powder coated anodized aluminium including handle tower bolt, hinges and glass pane not less than 5mm thick coloured fixed with rubber gasket and aluminium grill as per manufacturer design beading glazing clip of size 19.00x17.30x0.70mm (weight 0.097 Kg/RM of both side) shutters with top, lock rail and vertical member of size 83.40x44.45x1.30mm complete all as specified and directed..

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed..

Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed..

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix in repair PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc complete all as specified and directed.

Supply and fix for Factory made solid PVC moulded door shutters 28 to 30 mm thick (style) eith 2,4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm prelam PVC sheet on back face supplying & fixing at site as per specification & drawing complete all as specified and directed.

Supply and fix Factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified

Supply and fixing for 30 mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

Supply and fix 2nd class hard wood small fittings such as brackets of any type latch hinges blocked shaped door & window stopper and cleat including all necessay labour articles not exceeding 200cu cm each including 50mm size MS butt hinges complete, all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed..

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed..

S&F steel locking bolts of size 100mm with mild steel electrogalvanised plate and bright bolt not less than 10mm dia,complete all as specified and directed..

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fix for 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix Aluminium alloy, anodised, peg set of six. complete all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix in repair Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coats of weather proof exterior emulsion paint complete all as specified and directed.

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of distemper oil emulison over and including a coat of 3mm thick wall care putty, complete all as specified and directed.

M&L for applying three coats of white washing on walls including preparation of old plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for applying one coat of white washing on ceiling including preparation of old plastered surfaces complete all as specified and directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of colour wash over one coat of white wash complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying two coat of colour wash complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying two coat of dry distemper complete all as specified and directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified.

Supply and fix Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolt, PVC sheat cover and butterfly jet spray with necessary connection and exc flushing cistern and flush pipe, complete all as specified and directed.

Supply and fix 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve,32mm dia flush pipe, float and handle including connection to pipe complete all as specified and directed.

Supply and fix vitreous china wash hand basin white angle back of size 400x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix sheet glass shelf assembly 5.5mm thick and 120mm wide, sheet glass with chromium plated bracket, guard and railing 6mm long fixed to wall with OVC plug and screw complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 20mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 15mm dia bore Stop valve concealed type,long shank cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Taking down steel water tubing of 15/20/25mm dia including all fittings complete all as specified and directed.

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc complete all as specified and directed.

Refixing for steel water tubing galvanised, 15 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Supply and fix for steel water tubing galvanised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etccomplete all as specified and directed.

Refixing for steel water tubing galvanised, 20 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Supply and fix for steel water tubing galvanised, 25 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etccomplete all as specified and directed.

Refixing for steel water tubing galvanised, 25 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Cutting and screwing existing steel tubing of 25mm dia for alterations/additions in position without taking down including insertion of Tee or steel tube complete all as specified and as directed. complete all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 15mm bore complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 25mm bore complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed..

Dismantling Cast iron work of any discription complete all as specified and directed.

Taking down eaves and rain water pipes(any size/pattern) including all fittings complete all as specified and directed..

S&F 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified and directed..

S&F 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified and directed..

S&F 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 114 above, but except pipe complete all as specified and directed..

S&F 50 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 116 above, but except pipe complete all as specified and directed..

S&F 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 118 above, but except pipe complete all as specified and directed..

Supply and fix 100mm dia Bends (any radius) diminishing pieces or tapers (large bore measured) complete all as specified and directed.

Supply and fix 75mm dia Bends (any radius) diminishing pieces or tapers (large bore measured) complete all as specified and directed.

S&F branch pieces, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parralel branches 100mm dia with oval access doors complete all as specified and directed

S&F branch pieces, double (equal or unequal ) ordinary or inverted (spigot or socket type) or with parralel branches 100mm dia with oval access doors complete all as specified and directed

Extra for cast iron fitting, if fitted with oval access door for 100mm dia complete all as specified and directed

Extra for cast iron fitting, if fitted with oval access door for 75mm dia complete all as specified and directed

S&F in repair PVC grating, 100mm square/round PTMT complete all as specified and directed

S&F in salt glazed stone ware gully trap, square or round mouthed P-type of size 150x150mm complete all as specified and directed

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 110mm dia complete all as specified and directed..

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint laid in trenches or floor of 75mm dia complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 110mm bore complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 100mm dia of pipe complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 75mm dia of pipe complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 50mm dia of pipe complete all as specified and directed..

Supply and fix cast iron cowls 50 mm complete all as specified and directed..

Supply and fix cast iron cowls 75 mm complete all as specified and directed..

Supply and fix cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F "P" or "S" trap and fixed in position with 100 mm bore pipe complete all as specified and directed

Supply and fix PVC(SWR) floor trap 75 mm, with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete reinforced in any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Material and labour for roughening surfacesof old concrete of picking sweeping and washing down with water to remove dust etc including taking down tarfelt and brushing with neat cement slurry @ 3Kg of cement per sqm including 20mm thick screeding in CM 1:4 mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge (WPC shall be measured & paid seperately)..

Material and labour for applying evenly one coat of bitumen primer on roof surface conforming to IS-3384 of 1986 @ 0.30 litres/sqm. and applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application complete all as specified and directed by Engineer-in-Charge .

Plain cement concrete 50mm thick 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in padding on roof top surface shall be finished even and smooth w/o using extra cement complete, all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for Machine cut kota stone slab fooring 20-22mm thick jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed .

Siupply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Material and labour for 25mm thick plain cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone agg) as in floor finished even & fair surface w/o using extra cement complete all as specified and directed by Engineer-in-Charge .

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

M&L Concrete bed to drain pipes including forming cradles, in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), for 150mm dia pipe complete all as specified and directed..

. M&L Reinforced cement concrete pipe class NP-3, laid and jointed in cement mortar complete all as specified and directed.. (Concrete to be measured and paid for separately).

Construction of septic tank with cover slab RCC M-30(Design mix) for 10 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.

Soakage well in exc in ordinary soil, foundation in PCC 1:3:6 walls of honey combed and solid in M-30(Design mix) concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-30/ RR masonry/ Filling with brick bats, complete of size 1.8M dia X 3.0M effective depth, all as specified and directed as per Engr-in-Charge and shown on Drg No CE/TD/1203/2003 sheet 1/2 and 2/2.

Supply and fix for Mild steel framed work for manhole cover and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in drains or surface channels finished even and fair complete, all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement incluing forms, moulds, mitered/stopped ends etc complete all as specified and directed.

M&L Anti-termite treatment to the bottom and sides of the excavation at the rate of 5 Ltr per sqm of surface complete all as specified and directed

M&L Anti-termite treatment to backfilling in contact with foundation at the rate of 7.5 ltr of emulsion per sqm on vertical surface, complete all as specified and directed

M&L Anti-termite treatment to the top surface of filled earth at the rate of 5 Ltr per sqm of surface complete all as specified and directed

M&L Anti-termite treatment to the under plinth at the rate of 5 Ltr per sqm of surface complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 162 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 162 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 162 but one light point controlled by two way switch with cable 1.5 sqmm size complete all as per specified and directed.

All as per srl item No 162 but one bell/buzzer point controlled by one push button complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 1.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Switch piano, flush type single pole, two way 5 Amp. complete all as specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix bell ding dong, 230 V complete all as specified & directed. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including medium grade PVC non metallic rigid conduit of 20 mm dia and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour), including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 6.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 8 way distribution board for MCB provisions fitted with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz complete all as specified and directed.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 4 way distribution board for MCB provisions fitted with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz complete all as specified and directed.

Supply and fix LED tube light fitting, 1 x 18W/20W, 230V Energy efficient T8, Box Type, housing with reflector cover channel, bipin holders, connector block, etc complete with tube rod LED 18/20 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model no DMLNM1T8-16 or equivalent in Philips / Bajaj/ Wipro.

Supply and fix LED mirror fitting 1x8W, 230V Energy efficient, Box type, housing with reflector cover channel, bipin holders, connector block, etc complete with tube rod LED 8 Watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model No DMLN1T8-8 or equivalent in Philips/ Bajaj/ Wipro.

Supply and fix LED bulk head fitting luminarie with opal diffuser including LED lamp 10watt LED 6000K lamp holder etc including, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Crompton model No ICBH-10 or equivalent in Philips/ Bajaj/ Wipro.

Supply and fix in replacement Energy saving new genertion LED street light fitting powder coated toughfened glass of capacity 72 watt versalite pressure die cast aluminium with protection IP-66 and impect resistance of IK 07 with high power LEDs as light source with elect chip and driver suitable for pole dia 54 mm complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed of cat part No - PCGLSP172 of make Polycabor equivalent in Bajaj/Philips/Wipro/Crompton

Supply and Fix house service bracket hook type complete with 3.0 metre long GI Pipe 40mm dia medium grade, two nos 90 degree bends, MS hook and stay or gay complete all as specified and directed.

Supply and Fix in repair GI pipe bracket complete with 1.2 metre long GI Pipe 50mm dia medium grade, 180 degree angle, including fixing on wall with clamp for building light complete all as specified and directed.

Supply and fix LED lamp 12 watt, 230 volt with charger for backup to providing light on failure of main light atleast for two hours complete all as specified and directed

Supply and fix module switch one way, 6Amp, 01 module complete all as specified and directed.

Supply and fix module switch one way, 16Amp, 01 module complete all as specified and directed.

Supply and fix module socket 06Amp, three pin combine, 02 module complete all as specified and directed.

Supply and fix module socket 06/16Amp, six pin combine, 02 module complete all as specified and directed.

Supply and fix module fan step regulator 120 watt, 02 module complete all as specified and directed.

Supply and fix module white cover plate with frame, 02 module complete all as specified and directed.

Supply and fix module white cover plate with frame, 06 module complete all as specified and directed.

Supply and fix module white cover plate with frame, 12 module complete all as specified and directed.

Supply and fix module metal flush box, 02 module complete all as specified and directed.

Supply and fix module metal flush box, 06 module complete all as specified and directed.

Supply and fix module metal flush box, 12 module complete all as specified and directed.

Supply and fixing 1100 volts grade 6 Sq mm stranded conductor heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Supply and fix ceiling fan 1200 mm sweep ,230v, 50HZ, 5 star rating complete all as specified and directed

Supply and fix water heater storage type, (geyser) electric, 5 star bee rating with stainless steel inner tank single phase 230 vols, 50 HZ capacity 25 Ltrs including cutting/chasing of hole for fixing with the help of 04 Nos anchor bolt of min dia 12mm and 150mm long and making surface good as per existing including 02 Nos PVC pipe connection suitable for hot water min length 69cm complete as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 40 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 63 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in replacement sheet metal powder coated VTPN DB double door 4 way with and including MCCB 63 Amps, 415 Volts, 50 Hz AC 25 KA 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified and directed.

Supply and fix exhaust fan 300 mm sweep with louver complete including making all arrangement for holes in brick / stone masonary wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Taking down the existing faulty single phase tamper proof Electronic Energy meter and deposit in MES store and S&F AC single phase static energy meter of accuracy class 1.0, 240V, 50 Hz with Backlit LCD display of rating 10-60 Amp measures & display KWH, V , I, KW, Siz months history of energy & MD in KW complete all as specified and directed.

S&F in replacement LED Lamp 12 W,230W complete with Charger for back up for providing lights on failure of main for 2 hours all as specified

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,25 Sq mm X 4.0 core cross section area including takingout existing cable complete all as specified and directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,16 Sq mm X 2.0 core cross section area including takingout existing cable complete all as specified and directed.

Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

BALKRISHAN GUPTA AND SONS

M/S DUGGAL CONSTRUCTION CO

M/S ONKAR SINGH PATHANIA

KALSI CONSTRUCTION CO