INTERNAL PERIODICAL SERVICES AND CONNECTING BR WORK FOR MD ACCN IN OTM AREA UNDER GE AF ADM AREA AT AF STN GWALIOR

Amount

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified & directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall complete all as specified & as directed.

M & L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and other foreign materials (screws,nails) and applying one coat of oil bound distemper (OBD) complete all as specified & as directed. Note:- OBD shall be applied with hand roller only.

M & L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and other foreign materials (screws,nails) and applying two coat of oil bound distemper complete all as specified & as directed. Note:- OBD shall be applied with hand roller only.

M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including one coat of primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge.

M&L for applying two coats oil emulsion distemper on putty prepared surface complete all as specified and directed. Note:-Distemper shall be applied with hand roller only.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick wall surface finished even & smooth without using extra cement in CM 1:6 complete all as specified and directed.

M & L for 5 mm thick rendering in cement mortar 1:3 to the surfaces of ceiling and finishing even and smooth without using extra cement complete all as specified.

M & L preparation of newly plastered surfaces of walls and applying one coat of primer and two coats of oil bound distemper, complete all as specified and directed. Note:- Primer/Paints shall be applied with hand roller only.

M & L preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material at a distance exc 1.5 KM and n. exc 2.5 KM distance and depositing where as directed complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed

M&L for glazed ceramic tiles 450x300x6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

M&L for plain cement concrete 1:3:6 (40mm graded aggregate), 50mm thick, as in Plinth Protection/ Foot Path, laid in alternate bays, finishing concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

Demolition of Stone slabs of any description or thickness in floors / kitchen/roof platforms etc., complete all as specified and as directed.

M&L for Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed.

S&F 15 mm bore steel tubeing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking down old 15 mm GI tubing all as specified and directed.

S&F 20 mm bore steel tubeing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking down old 20 mm GI tubing all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor including PVC holding clamps including taking down old rain water pipes complete all as directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of old tank complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of old tank complete all as specified and directed.

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 15mm-142gms/20mm-210gms/25mm -455gms /40mm-690gms) all as specified.

S&F in repair 15 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and n.exceeding 2 sqm each and complete all as specified and directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down windows/ventilators area not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening after necessary easing/repair/welding hinges/door spring etc all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F for Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and including Decorative laminate type 1 of surface finish, colour and pattern 0.9 mm thick both sides as approved, fixed with approved adhesive as per manufacturer's instructions complete as spd and directed.

S & F factory made steel window with combined frame for side hung openable double shutters, ie glazed shutters with glazing bars dovetail or welded. and another side, wire gauge shutters with out glazing bars dovetail or welded including box type hinges with steel handles and steel peg stays in both glazed and wire gauge shutters including 08 Nos lungs ( Total four numbers shutters ie. two numbers openable glazed shutters on one side and two numbers wire gauzed shutters on another side of window frame) complete all as specified and directed.

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified.

S&F 125 mm size aluminium alloy handles, fabricated type, extruded section etc all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S&F in repair 150 mm length door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc all as specified and directed.

S&F mild steel work for hold fasts and similar small articles conforming to Fe-410 or Fe-310 complete all as specified and directed.

S&Fin repair stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed.

S&F in repair PVC connection of 15mm bore, 450 mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling making good to floor etc all as specified.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed.

S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400 mm excluding taps, waste, chain and plug porcelain stopper but including brackets incl cutting for and pinning in ends of brackets or erecting stand incl 32 mm dia pvc waste pipe and 32 mm dia waste cupling etc complete all as specified.

Supply and fixing in repair of steel door spring of size 200mm in wooden/steel frame by welding or screwing which ever is appropriate for fixing in frame complete all as specified.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in Squars not exc 0.5 Sqm in each pane or securing in the alu frame/wooden/iron work with necessary arrangement including hacking out old glass complete all as specified.

S&F in repair 15 mm dia angle Stop valves, of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms), complete all as specified and as directed.

S&F in repair 15 mm dia, bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed, (minimum weight 105 gms), complete all as specified and as directed.

S & F in repairs swivel shower of PTMT any colour for fixing with 15 mm bore pipe, (Minimum weight 40 grms), including Shower arm 15 mm bore, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair CP health faucet with 1.00 Mtr long flexible tube suitable for 15mm bore pipe including wall hook complete all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved.

S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed Quarter turn with water saving nozzle complete all as specified and as directed.

S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed.

S & F in repair pillar tap with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 600mm long. complete all as specified and directed.

Repair to leakage of 15 mm bore CP Wall Mixer/WHB Mixer/Sink Mixer by replacing of necessary brass spindles as required complete all as specified and directed.

S&F in repair fancy type brass chromium plated wall mixer 2-in-1 with wall flanges Connecting legs and bend screwed down suitable for 15 mm bore GI pipe Quarter turn with water saving nozzle complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F fxed in repairs tank covers (with locking arrangements as per existing one) of water storage tank for capacity 500 ltrs to 1000 ltrs complete all as specified & directed.

S&F in repair 1.00 mm thick stainless steel plate rack of over all size 600x900x100 mm of standard pattern complete all as specified and directed.

S&F in repair PTMT hand shower with flexible pipe not less than 1 Meter suitable for 15 mm bore fittings complete all as specified and directed.

S&F in repair 125 mm chromium plated central hole grating dome with waste hole complete all as specified and directed.

S&F 100 mm long fancy stainless steel handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge

S&F in repairs Magnet catch for kitchen cabinet shutters as per approved sample complete all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails etc all as specified and directed.

S&F in repair 18mm thick solid PVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed.

S & F in repair 12mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer any type or specification complete all as specified and directed.

S & F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed.

S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed

Supply and fix in repair aluminum (extruted body) door closer hydrauliclly regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F double action floor spring hydraulically regualted made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty etc, complete all as specified and directed.

M&L 75 mm dia nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc all as specified and directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using sand cast CI pipes 100 mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using sand cast CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc including taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROOF LW of Dr Pidilite or equivalent in make given in Appendix 'B' to PS as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of sika/fosroc/ms/ choksey and grouting around the inserted pipes byu porable sika/fosroc/m/s choksey bath seal grout as directed. (d) Make angle fillets by mixing sand cement and sika/fosroc/m/s choskey pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of M/s Sika/Fosroc/M/s choksey bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit or equivalent make as per manufacturer'sinstructions in sunken slab over brick bat . (g) Fill the sanitary gaps with M/s Sika/Fosroc/M/s choksey sealing compounds complete all as specified and directed.

M/s Shubham Construction Co.

USHA TRADERS

Sunil Traders

SHRI RAM CONSTRUCTION